ページ1に含まれる内容の要旨
IMPRESSA XS90/95
Instructions for use
9/05
Art. Nr. 65591
ページ2に含まれる内容の要旨
Legend: DISPLAY: serves as information. DISPLAY: please follow the instructions shown. JURA Elektroapparate AG, CH-4626 Niederbuchsiten, = Note = Important = Tip Internet http://www.jura.com
ページ3に含まれる内容の要旨
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 Fig. 7 Fig. 8 2 1 3 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Fig. 13 Fig. 14 Fig. 15
ページ4に含まれる内容の要旨
Description of the machine 16 17 18 1. Drip tray 2. Drip grate 15 3. Programming door 14 4. Rotary Switch 5. Selection key for pre-ground coffee 6. Coffee à la Carte key 19 13 7. 1 Coffee key 12 20 11 8. 2 Coffees key 10 21 9. 1 Espresso key 9 8 22 10. 2 Espressos key 7 11. ON / OFF key 23 12. Rinse key 24 13. Display dialog system 3 25 14. Water tank with handle 15. Aroma preservation cover 16. Bean tank cover 17. Lid for pre-ground coffee filler funnel 27 18. Height-adjustable coffee spout 19.
ページ5に含まれる内容の要旨
Contents 13.3 Maintenance ............................................page 14 1. Safety information ..............................................page 6 13.4 Programming the amount of powder for coffee 1.1 Warnings ................................................page 6 and espressso............................................page 14 1.2 Precautions..............................................page 6 13.5 Setting the amount of water for coffee, 2. Before you start using the IMPRESSA ...........
ページ6に含まれる内容の要旨
Never immerse the IMPRESSA in water. Before you begin Congratulations on having bought this IMPRESSA! 1.2.Precautions In order to ensure perfect operation of your IMPRESSA, carefully Never expose the coffee machine to weather (rain, snow, frost), read this operating manual and keep it for future reference. never touch the machine when your hands are wet. Should you need more information or meet with particular prob- Place the IMPRESSA on a firm, level base that is resistant to any lems not
ページ7に含まれる内容の要旨
Open the lid of the bean tank (16). 2.3 Filling the water tank To adjust the grinding degree, turn the Rotary Switch (Fig. 2) to Only use fresh, cold water. Never fill the water tank with the required position. milk, mineral water or other liquids. The smaller the dots, the finer the grind The larger the dots, the coarser the grind Take out the water tank and thoroughly rinse it out with cold tap water. 2.6 Power switch Then fill it with water and place it back into the coffee machine. M
ページ8に含まれる内容の要旨
Place a receptacle under the 2-stage frothing jet (24) and press 4. Adjusting your machine to the water hardness one of the Steam keys . The IMPRESSA heats up water. As a result, calcification The system now fills up automatically. A little water will leak occurs during normal use. This is indicated automatically. from the frothing jet. The IMPRESSA must therefore be adjusted to the hardness SYSTEM FILLING of the water used. Use the supplied test sticks to determine the water hardness or
ページ9に含まれる内容の要旨
Now turn the Rotary Switch (4) until the following message is Close the cartridge holder until it engages audibly. displayed: Fill the water tank (14) with cold, fresh tap water and place it EXIT back into the machine. Now press the Rotary Switch (4) to leave the programming mode. Place a sufficiently large receptacle (min. 0.5 litres) under the pivoting steam spout (23) and press one of the Steam keys SELECT PRODUCT to start the filter rinsing process. FILTER RINSING 5. Using a
ページ10に含まれる内容の要旨
process (I.P.B.A.S.) moistens the coffee powder, briefly inter- Fill the water tank (14) with cold, fresh tap water and place it rupts the flow of hot water and then begins with the actual brew- back into the machine. ing process. Place a sufficiently large receptacle (min. 0.5 litres) under the pivoting steam spout (23) and press one of the Steam keys 1 ESPRESSO (example) to start the filter rinsing process. NORMAL (example) FILTER RINSING The coffee brewing process stops automaticall
ページ11に含まれる内容の要旨
Turn the Rotary Switch (4) until the display indicates the desired 1 ESPRESSO (example) coffee strength and press the Rotary Switch (4) to make the cof- POWDER fee. The pre-brewing process (I.P.B.A.S.) moistens the coffee The coffee brewing process stops automatically as soon as the powder, briefly interrupts the flow of hot water and then begins set amount of water has run through. with the actual brewing process. SELECT PRODUCT A LA CARTE XSTRONG (example) To stop the brewing proces
ページ12に含まれる内容の要旨
To stop the process prematurely, turn the switch (22) back Place a cup under the pivoting steam spout (23) and dip the to . 2-stage frothing jet (24) in the milk to be frothed or the liquid to be heated. You can also change the amount of water set while the Press the Steam Portion key . machine is brewing coffee. Open the programming door. STEAM PORTION Turn the Rotary Switch (4) until the display indicates the You can stop the process any time by pressing the Steam Portion required amo
ページ13に含まれる内容の要旨
11.5 Cleaning the Professional-Cappuccino Frother Dip the 2-stage frothing jet (24) into the milk and press the key. and jet DRAW OFF STEAM After heating or frothing milk, you should clean the Profes- When you have frothed the milk to your liking, pres the key sional-Cappuccino Frother. We recommend cleaning it on a again. daily basis. Your IMPRESSA will not prompt you to clean the Profes- 11.3 Attaching the Professional-Cappuccino Frother sional-Cappuccino Frother. to the IMPRESSA The P
ページ14に含まれる内容の要旨
MACHINE RINSING 13.3 Maintenance The coffee spout (18) is rinsed. You can activate the following maintenance functions from this program item: 13. Programming RINSE MACHINE, CLEAN MACHINE, DE-SCALE MACHINE, CHANGE FILTER. The IMPRESSA leaves the factory with a number of default “DE-SCALE machine” is not displayed if you are using a CLARIS settings that allow you to make coffee without having to pro- plus filter and the filter is set to “YES”. gram the machine first. You can, however, adjust
ページ15に含まれる内容の要旨
SELECT PRODUCT 13.5 Setting the amount of water for coffee, espresso and coffee à la carte Open the programming door (3). Press the Rotary Switch (4) until you hear an acoustic signal. The system’s basic settings include pre-defined amounts of water FILTER (coffee 130 ml, espresso 60 ml, 2 coffees 260 ml, coffee à la carte NO or YES 145 ml). However, these can be modified as required. Turn the Rotary Switch (4) until the following message is dis- SELECT PRODUCT played: Open the prog
ページ16に含まれる内容の要旨
13.6 Programming the temperature for coffee, 13.7 Programming the water portion espresso and coffee à la carte The system’s basic settings include a pre-defined amount of water (225 ml). However, this amount can be modified as required. You can adjust the temperature for each type of coffee separately. The temperature can be set to 2 different levels SELECT PRODUCT (NORMAL, HIGH). Open the programming door (3). Press the Rotary Switch (4) SELECT PRODUCT until you hear an acoustic signal.
ページ17に含まれる内容の要旨
Now press the Rotary Switch (4) to start programming. FILTER NO or YES ECONOMY MODE - Turn the Rotary Switch (4) until the following message is dis- played: Now turn the Rotary Switch (4) until the required economy mode is displayed. STEAM PORTION ECONOMY MODE 2 (example) Press the Rotary Switch (4) to activate the program item. Confirm the selected setting by pressing the Rotary Switch (4). PORTION 20 SEC (example) ECONOMY MODE 2 (example) Turn the Rotary Switch (4) to m
ページ18に含まれる内容の要旨
Select this setting if you make mostly black coffees and are TIME prepared to wait for approx. 1 minute before being able to 13:00 (example) draw steam. Press the Rotary Switch (4) to confirm the hours and to activate the minutes. Economy mode 2 TIME 13:00 Selecting this level does not put the IMPRESSA in stand-by mode (economy temperature). The machine heats up each time you make Turn the Rotary Switch (4) to set the minutes. coffee or need to draw steam. TIME The IMPRESSA switches t
ページ19に含まれる内容の要旨
Now press the Rotary Switch (4) to start programming. Turn the Rotary Switch (4) until the following message is dis- played: UNIT ON —:— OFF AFTER 5 HRS Turn the Rotary Switch (4) to set the hours. Now press the Rotary Switch (4) to start programming. UNIT ON 07:00 (example) OFF AFTER 5 HRS Press the Rotary Switch (4) to confirm the hours and to activate the minutes. Turn the Rotary Switch (4) to set the switch-off time. UNIT ON OFF AFTER 07:00 4 HRS (example) Turn the
ページ20に含まれる内容の要旨
Turn the Rotary Switch (4) to change the time format. LANGUAGE ENGLISH DISPLAY AM/PM / ML Turn the Rotary Switch (4) to set the language. Confirm your selection by pressing the Rotary Switch (4). LANGUAGE ENGLISH (example) DISPLAY AM/PM / ML Confirm your selection by pressing the Rotary Switch (4). Turn the Rotary Switch (4) to change the unit of measurement. LANGUAGE ENGLISH DISPLAY AM/PM / OZ Now turn the Rotary Switch (4) until the following message is displayed: Con
