ページ1に含まれる内容の要旨
UK
Ireland
Australia
New Zealand
ページ2に含まれる内容の要旨
2
ページ3に含まれる内容の要旨
3
ページ4に含まれる内容の要旨
f. If operating a power tool in a damp location is Intended use unavoidable, use a residual current device (RCD) Your Black & Decker cordless drill/screwdriver has been protected supply. Use of an RCD reduces the risk of designed for drilling in wood, metal and plastics as well as for electric shock. screwdriving purposes. The VPX1222 cordless drill/ screwdriver has also been designed for drilling in soft 3. Personal safety masonry.This tool is intended for consumer use only. a. Stay alert
ページ5に含まれる内容の要旨
d. Store idle power tools out of the reach of children Use auxiliary handles supplied with the tool. Loss of and do not allow persons unfamiliar with the power control can cause personal injury. tool or these instructions to operate the power tool. Hold power tool by insulated gripping surfaces when Power tools are dangerous in the hands of untrained performing an operation where the fastener may users. contact hidden wiring or its own cord. Fasteners e. Maintain power tools. Check for mis
ページ6に含まれる内容の要旨
Labels on tools Features 1. Keyless chuck Warning! To reduce the risk of injury, the user must 2. Torque adjust collar (VPX1212) read the instruction manual. 3. Speed selector switch 4. Forward/reverse and lock-off button Additional safety instructions for batteries and chargers 5. Battery release button (on battery) 6. Battery compartment Batteries 7. Variable speed trigger switch Never attempt to open for any reason. 8. Torque adjust collar (VPX1222) Do not expose the battery to water. Do n
ページ7に含まれる内容の要旨
Charge discharged batteries within 1 week. Battery life The centre position of the control button (4) locks the will be greatly diminished if stored in a discharged state. tool in the off position. Make sure that the variable speed trigger switch (7) is released before changing the Charge indicators position of the forward/reverse control button (4). If the charger detects a problem with a battery pack, the If the tool does not turn on, check to see if one of the two TM charge indicator
ページ8に含まれる内容の要旨
To select the low speed, high torque setting (position 1), Drilling wood turn the tool off and allow it to stop. Move the speed Holes in wood can be made with the same twist drill bits used selector switch (3) towards the back. for metal or with spade bits. These bits should be sharp and To select the high speed, low torque setting (position 2), should be pulled out frequently when drilling to clear chips turn the tool off and allow it to stop. Move the speed from the flutes of the drill
ページ9に含まれる内容の要旨
Technical data Protecting the environment VPX1212 VPX1222 Separate collection. This product must not be Voltage Vdc 14 14 disposed of with normal household waste. Output torque Nm 23 23 Should you find one day that your Black & Decker product (max) needs replacement, or if it is of no further use to you, do not No load speed rpm 0-350 0-350 dispose of it with household waste. Make this product 0-1200 0-1200 available for separate collection. Max drilling capacity Separate collection of used
ページ10に含まれる内容の要旨
Guarantee Black & Decker is confident of the quality of its products and offers an outstanding guarantee. This guarantee statement is in addition to and in no way prejudices your statutory rights. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area. If a Black & Decker product becomes defective due to faulty materials, workmanship or lack of conformity, within 24 months from the date of purchase, Black & Decker guaran
ページ11に含まれる内容の要旨
11
ページ12に含まれる内容の要旨
12
ページ13に含まれる内容の要旨
13
ページ14に含まれる内容の要旨
14
ページ15に含まれる内容の要旨
15
ページ16に含まれる内容の要旨
90525494 11/07
