ページ1に含まれる内容の要旨
Model No. WLCCEX69871
Serial No.
Write the serial number in the space
above for future reference.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are com-
mitted to providing complete
customer satisfaction. If you
have questions, or find that there
are missing or damaged parts,
we will guarantee complete sat-
isfaction through direct assis-
tance from our factory.
TO AVOID UNNECESSARY
DELAYS, PLEASE CALL DIRECT
TO OUR TOLL-FREE CUS-
TOMER HOT LINE. The trained
technicians on our customer
ページ2に含まれる内容の要旨
TABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 PART IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . . . .
ページ3に含まれる内容の要旨
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read the following important precautions before using the exercise cycle. 1. Read all instructions in this manual before caught on the exercise cycle. Always wear using the exercise cycle. Use the exercise athletic shoes for foot protection. cycle only as described. 8. When adjusting the seat, insert the seat 2. It is the responsibility of the owner to ensure knob through one of the holes in the seat that all users of the exerc
ページ4に含まれる内容の要旨
BEFORE YOU BEGIN ® Thank you for selecting the new WESLO PURSUIT (excluding holidays). To help us assist you, please 895i exercise cycle. The PURSUIT 895i blends mention the product model number and serial number advanced engineering with contemporary styling to when calling. The model number is WLCCEX69871. provide you with a low-impact workout in the conve- The serial number can be found on a decal attached nience and privacy of your own home. to the PURSUIT 895i (see the front cover of this m
ページ5に含まれる内容の要旨
PART IDENTIFICATION CHART Use the chart below for help identifying the small assembly. Note: Some parts may have been pre- parts used in assembly. The number in parenthesis attached for shipping purposes. If a part is not below each part refers to the key number of the part. found in the parts bag, check to see if it has been The second number refers to the quantity used in pre-attached. M10 x 25mm Button Screw (8)–5 M8 x 90mm Carriage Bolt (9)–4 M4 x 16mm Screw (4)–5 M8 Nylon Locknut (21)–8 M8
ページ6に含まれる内容の要旨
ASSEMBLY Place all parts of the PURSUIT 895i in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench , a phillips screwdriver and two adjustable wrenches . 1. Identify the Front Stabilizer (51), which has Wheels 1 (25) on the ends. Hold the Front Stabilizer (51) against the saddle on 25 the front of the Frame (15). Attach the Fr
ページ7に含まれる内容の要旨
4. Attach the Handlebar (5) to the Handlebar Post (14) 4 with two M10 x 25mm Button Screws (8) and two M10 Split Washers (31). 8 31 5 14 5. Press the Side Shield Cover (30) into the Right and 5 19 Left Side Shields (1, 2). Make sure the four Tabs (A) on the Side Shield Cover are securely fastened to the Side Shields. Insert the Seat Post (20) into the Frame (15). Make sure that the Seat Post Bushing (23) is fully seated in the Frame. Align one of the holes in the Seat 53 Post with the hole in th
ページ8に含まれる内容の要旨
HOW TO USE THE PURSUIT 895i HOW TO ADJUST THE SEAT HOW TO APPLY AN INFORMATION DECAL TO THE CONSOLE For effective All of the information on the console is printed in exercise, the English. The included decal sheet contains the same Seat (19) should information in five other languages. If English is not be at the proper your language, find the decal on the decal sheet that height. As you is printed in your language. pedal, there 19 should be a slight bend in your knees when the pedals are in the
ページ9に含まれる内容の要旨
DIAGRAM OF THE CONSOLE 2. When the power is turned on, the upper LCD display will begin displaying the Calories, Laps, Speed, Time, and Distance modes. Each mode will be displayed for five seconds in a repeating cycle. Flashing arrows in the display will show which mode is currently displayed. Upper LCD 3. The LED track represents a distance of 1/4 kilome- Display ter. As you exercise, the indicators around the track will light one at a time until you have completed 1/4 Lower kilometer. A new l
ページ10に含まれる内容の要旨
CONDITIONING GUIDELINES The following guidelines will help you to plan your highest number is the recommended heart rate for exercise program. Remember that proper nutrition aerobic exercise. and adequate rest are essential for successful results. To measure your heart rate, first exercise for at least four minutes. Then, stop pedalling and measure your WARNING: Before beginning this or any exer- heart rate using the pulse sensor on the console. cise program, consult your physician. This is esp
ページ11に含まれる内容の要旨
EXERCISE FREQUENCY desired. Caution: Be sure to progress at your own pace and avoid overdoing it. Incorrect or excessive To maintain or improve your condition, plan three work- training may result in injury to your health. outs each week, with at least one day of rest between workouts. After a few months of regular exercise, you Remember, the key to success is make exercise a may complete up to five workouts each week, if regular and enjoyable part of your everyday life. SUGGESTED STRETCHES The
ページ12に含まれる内容の要旨
MAINTENANCE AND TROUBLE-SHOOTING Inspect and tighten all parts of the exercise cycle 30 regularly. Replace any worn parts immediately. The exercise cycle can be cleaned with a soft, damp 50 cloth. Avoid spilling liquid on the console. Keep the 29 console out of direct sunlight or the display may be damaged. Remove the batteries when storing the 17 exercise cycle. 50 HOW TO TIGHTEN THE CRANK 63 If the arms of the Crank (17) become loose, they 1 should be tightened in order to prevent excessive
ページ13に含まれる内容の要旨
HOW TO ADJUST THE RESISTANCE STRAP side shield. Next, use an adjustable wrench to turn the right pedal counterclockwise and remove it. If there is not enough pedalling resistance when the Remove the right side shield. Press down on the cen- resistance knob is turned to the highest setting, the tre of the Belt (16) between the front and rear sprock- Resistance Strap (47) may need to be adjusted. To ets. There should be from 1/4” to 3/4” of vertical adjust the Resistance Strap, the left side shiel
ページ14に含まれる内容の要旨
PART LIST—Model No. WLCCEX69871 R0500A Key No. Qty. Description Key No. Qty. Description 1 1 Left Side Shield 36 2 Adjustment Bracket 2 1 Right Side Shield 37 2 M6 Nut 3 2 Double Tree Fastener 38 1 Flywheel Axle 4 11 M4 x 16mm Screw 39 1 Flywheel 5 1 Handlebar 40 2 Crank Bearing Assembly 6 2 Foam Grip 41 1 Cable Clamp Assembly 7 1 Console 42 1 Right Pedal Strap 8 5 M10 x 25mm Button Screw 43 2 Flywheel Bearing 9 4 M8 x 80mm Carriage Bolt 44 2 M10 Washer 10 1 Resistance Knob 45 1 Left Pedal Strap
ページ15に含まれる内容の要旨
EXPLODED DRAWING—Model No. WLCCEX69871 R0500A 30 3 33 6 50 50 2 7 3 1 10 5 11 31 19 12 8 4 27 31 14 26 25 53 53 21 24 4 21 16 54 20 42 17 29 8 31 4 31 13 8 22 23 15 18 55 40 47 21 58 46 51 41 21 4 9 49 32 41 34 44 43 4 4 36 54 39 35 37 27 43 26 4 21 57 44 24 4 34 25 38 21 48 45 35 40 37 36 52 4 48 28 17 56 9 15
ページ16に含まれる内容の要旨
ORDERING REPLACEMENT PARTS To order replacement parts, simply call our Customer Service Department toll-free at 1-888-936-4266, Monday– Friday, 8:00 am–6:30 pm EST (excluding holidays). To help us assist you, please be prepared to give the follow- ing information when calling: • The MODEL NUMBER of the product (WLCCEX69871). ® • The NAME of the product (WESLO PURSUIT 895i). • The SERIAL NUMBER of the product (see the front cover of this manual). • The KEY NUMBER and DESCRIPTION of the part(s
ページ17に含まれる内容の要旨
CUSTOMER RECORD Model No.: Serial No.: Retailer Name: Purchase Date: Retailer Address: PLACE STAMP HERE ICON of Canada Inc. 900 de l’Industrie St-Jérôme, Québec Canada, J7Y 4B8 17
ページ18に含まれる内容の要旨
LIMITED WARRANTY ICON OF/DU CANADA INC., (ICON), warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of ninety (90) days from the date of purchase. This warran- ty extends only to the original purchaser. ICON's obligation under this warranty is limited to replacing or repairing, at ICON's option, the product at one of its authorized service centers. All products for which warranty claim is made must be received by ICON
