ページ1に含まれる内容の要旨
FRANÇAIS
ENGLISH ESPAÑOL
R Trademark
Please do not return unit to retailer.
Por favor, no devuelva el aparato al lugar de compra.
Veuillez ne pas retourner l’outil au détaillant.
1-800-554-6723
www.weedeater.com
Instruction Manual
Manual de Instrucciones
Manuel d’Instructions
GA2010
Gutter Cleanout Kit
For OccasionalUse Only
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea el manual de
ページ2に含まれる内容の要旨
SAFETY RULES OPERATEYOURUNITSAFELY WARNING: Failure to follow all D Inspect unit before each use for worn, SafetyRulesandPrecautionscanresult loose, missing or damaged parts. Do in serious injury. notuseuntilunitisinproperworkingor- KNOWYOURATTACHMENT der. D Donot set unitonanysurfaceexcepta D Read your instruction manual for the clean, hard area while engine/motor is original tool. Make certain you com- running. Debris such as gravel, sand, pletely understand and can follow all dust, grass, etc
ページ3に含まれる内容の要旨
ASSEMBLY CARTONCONTENTS Check carton contents against the fol- lowing list. Refer to the illustrations in Electric the OPERATION section of this manual. Units Tabs S Nozzle with Tabs S Elbow with spacer ring S Extension Tube (4) S Pivot Tube S Adapter -- gas units with tabs S Adapter -- electric units with tabs S Adapter -- electric units with tube Electric Units release button with S Goggles TubeRelease Examine parts for damage. Do not use Button damaged parts. Ifyouneedassistanceorfindpartsmis
ページ4に含まれる内容の要旨
4. Alignthegroovesontheadapterwith the tabs on the blower outlet. Elbow 5. Push adapter onto the blower outlet; Spacer turn adapter clockwise until parts Ring snap into place. 6. Proceed to ALL UNITS -- TUBE AS- SEMBLY. ELECTRICUNITSWITHTUBE RELEASEBUTTON Slot Clamp Ring Key 1. Stop the motor, disconnect power source, and wait until impeller has completely stopped turning. 4. Align key with slot and insert elbow 2. Remove all tubes or other attach- into blower outlet. ments from unit. 5. Securel
ページ5に含まれる内容の要旨
NOTE: Make surethreaded joints(tubes and nozzle) are securely tightened. 5. Align the tube assembly in a vertical position. Pivot 6. Thread extension tube assembly Tube Nozzle onto the end of the pivot tube. Extension Elbow Tubes OPERATION KNOWYOURGUTTERATTACHMENT READ THIS INSTRUCTION MANUAL AND SAFETY RULES BEFORE OPERATING YOUR UNIT. Compare illustrations to your unit to familiarize yourself with the location of the various controls and adjustments. Save this manual for future reference. Adap
ページ6に含まれる内容の要旨
D To reduce the risk of hearing loss as- sociated with sound level(s), hearing protection is required. D Toreducetheriskofinjuryassociated withcontactingrotatingparts,stopthe engine/disconnect from the power source and wait until impeller has completely stopped turning before installing or removing attachments. D Stand 3 to 4 feet away from building. D Rotate the pivot tube to position the nozzle right or left. MAINTENANCE CHECKFORCLOGGEDTUBES BEFORE EACH USE S Nozzleandtubesshouldbefree from CH
