ページ1に含まれる内容の要旨
Built-in coff ee maker
Installation instructions
and User guide
EB60DSXB model
NZ AU GB IE CN
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
1 Contents EN Safety and warnings 2 Electrical connection (GB IE only) 5 Installation instructions 6 Introduction 10 Using the appliance for the first time 14 Turning on and heating up 17 Making coffee using coffee beans 18 Making espresso coffee with pre-ground coffee 20 Making cappuccino (using the steam function) 21 Cleaning 22 Changing and setting menu parameters 25 Displayed messages 30 Troubleshooting 32 Warranty and service 35 Important! Save these instructions The models shown
ページ4に含まれる内容の要旨
2 EN Safety and warnings Your safety is important to us. Please read this information before using your coffee maker. WARNING! Cut Hazard Take care – panel edges are sharp. Failure to use caution could result in injury or cuts. Important safety instructions! This is a household appliance only. It is not intended to be used in: - staff kitchen areas in shops, offices and other working environments; - farm houses; - by clients in hotels, motels and other residential type environme
ページ5に含まれる内容の要旨
3 Safety and warnings EN Important safety instructions! If the appliance is faulty, do not attempt to repair. Turn it off using the main switch, unplug from the mains socket and contact Customer Care. Keep all packaging (plastic bags, polystyrene foam) away from children. Children of less than 8 years old must be kept away from the appliance unless continuously supervised. This appliance can be used by children aged from 8 years and above, and persons with reduced physical, senso
ページ6に含まれる内容の要旨
4 EN Safety and warnings Important safety instructions! Do not use the appliance when extracted. Make sure the appliance is inactive before extracting it. The only exception is adjusting the coffee mill which must be done with the machine out (see the section “Adjusting the coffee mill”). Use original or manufacturer recommended accessories and spare parts only. This appliance is designed and made to prepare coffee and other hot drinks. All other use is considered improper. This
ページ7に含まれる内容の要旨
5 Electrical connection (GB IE only) EN For Great Britain only Fuse cover Important! Fuse This appliance must be earthed. Fuse replacement The mains lead of this appliance is fitted with a BS 1363A 13 A fused plug. To change a fuse in this type of plug, use an ASTA approved fuse to BS 1362 type and proceed as follows: 1 Remove the fuse cover and fuse. 2 Fit the replacement 13A fuse into the fuse cover. 3 Refit both into plug. Important! The fuse cover must be refitted when changing a fuse and
ページ8に含まれる内容の要旨
6 EN Installation instructions Checking for transport damage After removing the packaging, make sure the product is complete and undamaged and that all accessories are present. Do not use the appliance if it is visibly damaged. Contact Customer Care. Installing and connecting the appliance Important! Installation must be performed by a qualified professional in compliance with legislation in force in the country of installation (see Built-in installation). This appliance should be conn
ページ9に含まれる内容の要旨
528 mm 7 Installation instructions EN Built-in installation Verify the minimum measurements required for correct installation of the appliance. The coffee maker must be installed in a column and the column must be firmly fixed to the wall with commercially available brackets. Important! All installation or maintenance operations must be performed with the appliance disconnected from the mains electricity supply. Kitchen furniture in direct contact with the appliance must be heat resista
ページ10に含まれる内容の要旨
560 + 8 mm 560 + 8 mm 597 mm 597 mm 8 EN Installation instructions Installation option A: Coffee maker by itself Installation option B: Coffee maker with lower grill kit - this is to match the height of adjacent appliances The lower grill kit can be purchased as a separate accessory from Customer Care. 2 200 cm 2 200 cm 21 mm 21 mm 45 mm 45 mm 45 mm 45 mm 45 mm 45 mm 45 mm 500 mm 545 mm Min. 500 mm 545 mm Min. 412 mm 412 mm 450 mm 470 mm 457 mm 478 mm
ページ11に含まれる内容の要旨
560 + 1 mm 9 Installation instructions EN Important! If you choose Installation option B, you will need to install the lower grill kit BEFORE you install the coffee maker. Refer to the instructions packed with the lower grill kit. x 16 x 2 x 4 x 8 Position the rails on the sides of the cabinet as shown in the figure. Fix with Position the appliance on the rails, making the screws, then extract them completely. sure the pins are correctly inserted in If the coffee maker is install
ページ12に含まれる内容の要旨
10 EN Introduction Product overview Touch controls overview
ページ13に含まれる内容の要旨
Introduction EN Product Overview descriptions Description of the control panel A1. Cup tray Only the icons available in the function A2. Service door currently being used will be lit on the touch A3. Coffee guide screen. A4. Waste coffee container A light touch is enough to activate the icon. A5. Brewing unit B1. Display: guides the user in using the A6. Cup tray lights appliance. A7. On/OFF/stand-by button B2. icon to activate or deactivate menu A8. Display parameter setting mode A9. Contro
ページ14に含まれる内容の要旨
12 EN Introduction fig. fig. fig. fig. fig. fig. fig. fig. fig. fig. fig. fig. fig. fig. fig. fig.
ページ15に含まれる内容の要旨
13 Introduction EN fig. fig. fig. fig. fig. fig. fig. fig. fig. fig. fig. fig. fig. fig. fig.
ページ16に含まれる内容の要旨
14 EN Using the appliance for the fi rst time Coffee has been used to factory test the appliance and it is therefore completely normal for there to be traces of coffee in the mill. Customise water hardness as soon as possible following the instructions in section ‘Changing and setting menu parameters’, under “Setting water hardness”. 1 Connect the appliance to the mains supply. Set the required language. 2 To set the language, use the icons (B7 and B8) to choose the required language (fig
ページ17に含まれる内容の要旨
15 Using the appliance for the fi rst time EN Installing the filter Some models are fitted with a water softener filter to improve the quality of the water used and extend the working life of the appliance. To install, proceed as follows: 1 Remove the filter from the packaging; 2 Slide the date indicator pointer (see fig. 29) until the months of use are displayed. Note: The filter lasts about two months if the appliance is used normally. If the coffee maker is left unused with the filter inst
ページ18に含まれる内容の要旨
16 EN Using the appliance for the fi rst time Replacing the filter (“FILTER RESET”) When “REPLACE FILTER” is displayed or after 2 months of use (see date indicator), the filter must be replaced: 1 Remove the exhausted filter; 2 Remove the new filter from the packaging. 3 Slide the pointer of the date indicator (see fig. 29) until the months of use are displayed (the filter lasts about 2 months); 4 Insert the filter in the water tank and press it until it touches the bottom of the tank (see fig
ページ19に含まれる内容の要旨
17 Turning on and heating up EN Each time the appliance is turned on, it performs an automatic preheat and rinse cycle which cannot be interrupted. The appliance is ready for use only after completion of this cycle. Important! Be careful. During rinsing, a little hot water flows from the coffee spouts. To turn the appliance on, press the ON/OFF/stand-by button (A7) (fig. 1). The message “HEATING UP... PLEASE WAIT” is displayed. When heating is complete, the message changes to “RINSING”; The
ページ20に含まれる内容の要旨
18 EN Making coff ee using coff ee beans 1 The appliance is preset to make coffee with a normal taste. You can also choose coffee with an extramild, mild, strong or extra-strong taste. There is also a pre-ground coffee option. To choose the required taste, press the icon (B4) (fig. 7). The required coffee taste is displayed. 2 Place 1 cup under the spouts to make 1 coffee (fig. 8) or 2 cups for 2 coffees (fig. 9). Lower the spouts as near as possible to the cup for a creamier coffee (fig. 10
