ページ1に含まれる内容の要旨
Operating Instructions and Parts Manual WIP100, WIP150
Please read and save these instructions. Read carefully before attempting to assemble, install, operate or maintain the product described.
Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or
property damage! Retain instructions for future reference.
Pool Pumps
SAFETY GUIDELINES
Description Installation
1. Read these rules and
MANUAL
This swimming pool
ページ2に含まれる内容の要旨
Operating Instructions and Parts Manual WIRING RECOMMENDED ADHESIVES* Operation PVC - PVC Joint PVC - ABS Joint Prime pump before attempting to operate. To prime pumps located above All wiring must be performed Uni-Weld Uni-Weld water level, remove strainer cover, fill by a qualified electrician. The Pool-Tite 2000 Pool-Tite 2000 strainer body with water then replace pump must be installed in Suregard Weld cover. If pump and all piping is located compliance with all local codes an
ページ3に含まれる内容の要旨
WIP100, WIP150 Do not HAIR AND LINT STRAINER Maintenance retighten 1. Switch off the power. strainer Ring-Lok during operation. 2. Close the valves in the suction and return line. WINTERIZING Disconnect, tag and lock 3. Turn strainer Ring-Lok counter- Always protect system from freezing out power source before clockwise and remove stainer cover. temperatures. Drain the system if there attempting to install, service, is a possibility of freezing. To drain the relocate or perform a
ページ4に含まれる内容の要旨
Operating Instructions and Parts Manual WIP100, WIP150 For Replacement Parts or technical assistance, call 1-800-237-0987 1 Please provide following information: - Model number - Serial number (if any) - Part description and number as shown in parts list Address parts correspondence to: WAYNE Pumps 4 101 Production Drive Harrison, OH 45030 U.S.A. 2 Part No. Description Replacement Number Qty. 1 Cap and O-ring 69010-001 1 2 Filter 28477-001 1 3 Tank — 1 4 Motor — 1 3 Limited Warranty For o
