ページ1に含まれる内容の要旨
5713216211/05.11
2
ページ2に含まれる内容の要旨
BEAN TO CUP ESPRESSO AND CAPPUCCINO MACHINE Instruction for use ECAM26.455 1
ページ3に含まれる内容の要旨
B2 B3 B4 B5 B6 B1 B7 B13 B8 B9 B10 B11 B12 D1 D2 C2 C1 A18 C3 C4 C5 D3 D4 C6 D5 D6 2 2
ページ4に含まれる内容の要旨
A1 A2 A5 A3 A6 A4 A11 A12 A7 A13 A8 A14 A9 A15 A16 A10 A22 A18 A17 A20 A19 A21 3 3
ページ5に含まれる内容の要旨
1 234 5 678 910 11 12 16 13 14 15 4
ページ6に含まれる内容の要旨
17 18 19 20 CLEAN 21 22 23 24 25 26 27 28 A B 29A B A 29B 30 31 32 5 PUSH PUSH
ページ7に含まれる内容の要旨
MAKING DRINKS WITH MILK................................... 13 CONTENTS Filling and attaching the milk container ................................. 13 INTRODUCTION .......................................................7 Adjusting the amount of froth ................................................ 13 Symbols used in these instructions ........................................... 7 Making drinks with milk automatically ................................... 14 Letters in brackets .....................
ページ8に含まれる内容の要旨
INTRODUCTION Thank you for choosing the ECAM 26.455 automatic coffee and enabling the appliance to be unplugged when necessary. cappuccino maker. We hope you enjoy using your new appliance. Never pull the power cable as you could damage it. Take a few minutes to read these instructions. This will avoid all risks and damage to the machine. switch at the back of the appliance by pressing it (fig. 2). Symbols used in these instructions
ページ9に含まれる内容の要旨
B11. HOT MILK button: to deliver a cup of milk (When in the Please note: settings menu, press to scroll forwards) Keep these instructions B12: button: to deliver steam If the appliance is passed to other persons, they must also be B13. button: to make 2 cups of coffee with the provided with these instructions. settings displayed DESCRIPTION Description of the milk container (page 3 - C ) Description of the appliance C1. Milk container lid (page 3 - A ) C2. Froth adjustment
ページ10に含まれる内容の要旨
Connecting the appliance If your model is not provided with a filter, you can request one from De’Longhi Customer Experience. Important! Check that the mains power supply voltage corresponds to TURNING THE APPLIANCE ON the value indicated on the rating plate on the bottom of the appliance. Please note! Connect the appliance to an earthed and correctly installed Before turning the appliance on, make sure the main switch on socket with a minimum current rating of 10A only. the back of the
ページ11に含まれる内容の要旨
Auto-start MENU SETTINGS You can set the auto-start time in order to have the appliance When you access the programming menu by pressing the MENU/ESC ready at a certain time (for example in the morning) so you can button, the following menu items are available: make coffee immediately. Rinsing Use this function to deliver hot water from the spout to heat the internal Please note! circuit and make the coffee delivered hotter. To enable this function, the time must already have been set T
ページ12に含まれる内容の要旨
“Enable?” if the function has been disabled);o To disable or re-enable the beep, proceed as follows: 4. Press the button to disable (or enable) energy 1. Press the MENU/ESC button to enter the menu; saving mode; 2. Press the HOT MILK or LATTE button (fig. 8) until “Beep” 5. Then press the MENU/ESC button to exit the menu. is displayed; When the function is enabled, if the machine is not used for 3. Press the button. “ Disable?” or “ Enable?” is about 1 minute, “Energy Saving” is displaye
ページ13に含まれる内容の要旨
coffee is too thin and not creamy enough or that delivery is too MAKING COFFEE slow (a drop at a time), this can be corrected by adjusting the Selecting the coffee taste grinding adjustment dial (fig. 12). The appliance is set by default to make coffee with a standard Please note! taste. The grinding adjustment dial must only be turned when the You can also choose one of these tastes: coffee mill is in operation. Extra-mild taste If the coffee is delivered too slowly Mild taste or not at
ページ14に含まれる内容の要旨
coffee buttons ( or ). MAKING DRINKS WITH MILK Please note! in the cup, just press (within 3 seconds) one of the coffee buttons ( or ). always clean the milk container lid and hot water nozzle Once the coffee has been made, the appliance is ready to use as described in the section “Cleaning the milk container” again. on pages 14 and 17. Please note! Filling and attaching the milk container 1. Remove the lid (fig. 18); the machine (fill ta
ページ15に含まれる内容の要旨
Making drinks with milk automatically Programming the quantity of coffee and milk in the The CAPPUCCINO, LATTE, FLAT WHITE and HOT MILK buttons cup for the CAPPUCCINO, LATTE, FLAT WHITE and HOT on the control panel enable these drinks to be prepared MILK buttons. automatically. The appliance is set by default to automatically deliver standard Proceed as follows: quantities. 1. Fill the milk container and attach it as described above. To change these quantities, proceed as follows: 2.
ページ16に含まれる内容の要旨
To modify these quantities, proceed as follows: sponge and warm water. 1. Position a container under the spout. 6. Reinsert the nozzle and replace the cappuccino maker on 2. Press the button again until “Hot water Program the nozzle, turning it and pushing it upwards until it is quantity” is displayed, then release the button. attached. 3. When the hot water in the cup reaches the required level, press the button again. CLEANING The machine is now reprogrammed with the new quantity. Im
ページ17に含まれる内容の要旨
To remove the drip tray: 4. Press the two red release buttons inwards and at the same 1. Remove the drip tray and the grounds container (fig. 26); time pull the infuser outwards (fig. 31). 2. Empty the drip tray and grounds container and wash 5. Soak the infuser in water for about 5 minutes, then rinse them; under the tap. 3. Check the red condensate tray and empty if necessary. Important! 4. Replace the drip tray and grounds container. RINSE WITH WATER ONLY NO WASHING UP LIQUID -
ページ18に含まれる内容の要旨
2. Remove the milk spout and DESCALE intake tube. Descale the machine when the message “DESCALE” flashes on 3. Turn the froth adjustment the display. dial to the “INSERT” position Important! (see figure) and pull it off upwards. eyes. 4. Wash all the components It is vital to respect the manufacturer’s safety warnings thoroughly with hot water given on the descaler pack and the warnings relating to and mild washing-up the procedure to follow in the event of
ページ19に含まれる内容の要旨
Remove the water tank, empty, rinse under running 6. Press the MENU/ESC button to exit the menu. water, fill with clean water and replace. The machine is now reprogrammed with the new water “Rinsing... Confirm?” is displayed. hardness setting 8. Empty the container used to collect the descaler solution and replace it empty under the hot water spout. WATER FILTER 9. Press the button to start rinsing. Certain models are fitted with a water softener filter. If this Hot water flows out of
ページ20に含まれる内容の要旨
10. The message “Enable?” is displayed. 3. Press the MILK or CAPPUCCINO button (fig. 8) until 11. Press the button to confirm the selection. “Hot “Install filter Enabled” is displayed; water Confirm?” is displayed. 4. Press the button 12. Position a container with a minimum capacity of 100 ml 5. “Disable?” is displayed; under the hot water spout. 6. Press the button to confirm and the MENU/ESC 13. Press the button to confirm the selection. The button to exit the menu. appliance be
