Vector 167662 R0700Aの取扱説明書

ページ1に含まれる内容の要旨

Model No. 831.488540
User's Manual

ページ2に含まれる内容の要旨

Setup 1. Firmly press the thumb tab and pivot the upright up until it locks in a nearly verti- Hand cal position. 2. Insert the handles into the stem until the To prevent lock pins are visible in the holes in the serious Injury: stern. •Read, understand and follow all war- 3. Open the quick-release lever. Depress the nlngs and Instruc- lock pin on the stem and slide the stem tions on the unit up until the lock pin is visible in one of and in the manual, the three holes in the upright. When the s

ページ3に含まれる内容の要旨

Part List/Exploded Drawing Model No. 831.4ui:i )4u R0700A No. Qty. Description 1 1 Deck 2 1 Head Tube 3 1 Fork 4 1 Upright 5 1 Stem 6 2 Handle 7 2 Foam Pad 8 2 Handle Cap 9 3 Lock Pin 10 1 Handle Cord 11 1 Quick Release 12 1 Upright Clamp w/Ring 13 1 Bearing Nut 14 1 Bearing Cap 15 2 Bearing 16 2 Bearing Race 17 2 Bushing 18 1 Pivot Union Bolt Set 28 19 1 Front Union Bolt Set 20 2 Rear Union Bolt Set 21 2 Wheel 22 2 Rear Wheel Spacer 23 1 Brake Spring 24 1 Brake 25 1 Head Tube Spring 26 1 Storag

ページ4に含まれる内容の要旨

If the quick-release doesn't hold the stem snug in place, you will need to adjust it. Close Open Quick Open the quick-release lever. Turn the adjustment nut Release clockwise one half turn while keeping the lever from turn- ing. Close the lever. Repeat this procedure until the stem is held snug in place. Adjustment If the quick-release is too snug to close, you will need to Nut adjust it. While the quick-release lever is open, turn the adjustment nut counterclockwise one quarter tern while keepi