ページ1に含まれる内容の要旨
PROGRAMMABLE
CONICAL BURR
COFFEE GRINDER
EM0490
ページ2に含まれる内容の要旨
Heading 2
ページ3に含まれる内容の要旨
Contents Sunbeam’s Safety Precautions 2 Congratulations 3 ® Features of your Programmable Café Series Conical Burr Coffee Grinder 4 ® Functions of your Programmable Café Series Conical Burr Coffee Grinder 6 ® Operating your Programmable Café Series Conical Burr Coffee Grinder 8 How to program 1 and 2 cup grind 12 measurements Adjusting the Grind Setting 13 Care and Cleaning 14 Important instructions – retain for future use.
ページ4に含まれる内容の要旨
Sunbeam’s Safety Precautions SAFETY PRECAUTIONS FOR YOUR SUNBEAM • Always place the unit on a flat, level surface. COFFEE GRINDER • Switch off and unplug at power point before cleaning. • Check the grinding bowl for the presence of foreign objects before using. • Do not attempt to re-grind ground coffee. • Always operate the grinder with the ground • Switch off the appliance and disconnect from coffee container properly inserted in the power supply before touching any part of the
ページ5に含まれる内容の要旨
Congratulations Congratulations on the purchase of your Another advantage of the conical burr design ® Sunbeam Café Series Programmable Conical is its slow rotating operation. This combined Burr Coffee Grinder. with a gear-driven motor, minimises heat transfer to the burrs and thus protects the The Sunbeam Café Series™ delivers quality, aromatic profile of the coffee and ultimately style and superior performance capturing enhances the quality of the resulting brew. the essence of the c
ページ6に含まれる内容の要旨
® Features of your Café Series Programmable Conical Burr Coffee Grinder 250g Bean hopper The 250g capacity bean hopper has a shutter release mechanism for easy removal and preventing accidental spills. It allows the user to transfer any un-used beans to an ideal storage unit to preserve freshness. Grind adjustment collar Large and easy to use, the collar has a wide-range of 24 grind settings. The coffee maker can select a fine grind to suit commercial espresso or adjust the setting for
ページ7に含まれる内容の要旨
® Features of your Café Series Programmable Conical Burr Coffee Grinder Burr shield Conical burrs The metal conical burr design achieves excellent grind consistency and minimises heat transfer to the coffee due to the slowly rotating burrs. Grind delivery chamber The grind delivery chamber is designed to assist in delivering the ground coffee directly into the group handle or coffee grind container. Grind on demand button Position the group handle into the group handle locator, push again
ページ8に含まれる内容の要旨
Functions of your Programmable ® Café Series Conical Burr Coffee Grinder Programmable 1 and 2 cup dosing The control panel enables pre-set 1 and 2 cup grind measurements, both adjustable using the program button. Grind Delivery Chamber The grind delivery chamber is designed to assist in delivering the ground coffee directly into the group handle or coffee grind container. 6
ページ9に含まれる内容の要旨
® Functions of your Programmable Café Series Conical Burr Coffee Grinder (continued) Slow speed grinding The combination of a powerful gear-driven motor and conical burr design delivers a slow speed grinding process. This minimises the heat transferred to the coffee, protecting its aromatic profile. Grind on demand As with commercial bar grinders, the ‘Auto’ function allows coffee beans to be freshly ground directly into the group handle on demand as required by the coffee maker, provi
ページ10に含まれる内容の要旨
® Operating your Café Series Programmable Conical Burr Coffee Grinder Before using the coffee grinder, wipe the 4. Place the hopper lid onto the bean hopper. base exterior with a damp cloth. Wash the 5. Plug the power cord into a 230-240V AC bean hopper, hopper lid and ground coffee power outlet and switch the power on. container in warm soapy water, then rinse 6. Select the grind by turning the grind and dry. adjustment collar to the desired setting, Note: Do not immerse the
ページ11に含まれる内容の要旨
® ® Operating your Café Series Programmable Conical Burr Coffee Operating your Café Series Grinder (continued) Programmable Conical Burr For grinding continuous quantities For grinding into the group handle Coffee Grinder 7. Remove the lid from the ground coffee 10. Position the group handle into the group container and slide onto the preparation handle locator, see figure 5. mat. The coffee container will fit Figure 5 comfortably into the domestic size group handle locator, s
ページ12に含まれる内容の要旨
® Operating your Café Series Programmable Conical Burr Coffee Grinder (continued) There are two grind funnels provided: a smaller size to fit domestic handles and a larger size for commercial handles. 15. Position the group handle with grind funnel into the group handle locator, see figure 9. Figure 7 13. When the basket is full, pull the group handle off the button. Collapse the coffee in the basket by tapping it on the bench and repeat until the desired amount of coffee has been groun
ページ13に含まれる内容の要旨
® Operating your Café Series Programmable Conical Burr Coffee Grinder (continued) 16. Flip the switch to the ‘Auto’ position, see 17. To select your already pre-set figure 10 measurement of ground coffee, press the 1 cup or 2 cup buttons located on the control panel. The pre-programmed dose of coffee grind will be delivered into your group handle. 18. When the grind has stopped, remove the grind funnel from the top of the group handle and collapse the coffee by tapping it on the ben
ページ14に含まれる内容の要旨
How to program 1 and 2 cup grind measurements The factory default setting for 1 cup is 12 and 2 cup buttons will soften in seconds, and for 2 cups is 20 seconds. brightness. To reset original factory default settings, press and hold the program button for a period of 5 seconds. All three buttons will flash once after 1 second - continue pressing the program button and all three buttons will flash three times at 5 seconds. This will indicate the factory default settings have been
ページ15に含まれる内容の要旨
How to program 1 and 2 cup grind Adjusting the Grind Setting measurements Grind setting table of coffee for every 4 cups of brew water as measured with the carafe. Finer grinds SETTING BREWING METHOD usually require less coffee, but using too fine a grind will result in a brew that is 2 – 6 Turkish bitter in flavour. 12 – 16 Espresso 3. For those that prefer weaker coffee, 12 – 16 Stove Top continue to use the recommended amount of ground coffee and then dilute the 20 – 23 D
ページ16に含まれる内容の要旨
Care and Cleaning Important Notes: 2. Wipe the motor base exterior with a damp cloth and dry. • Spots and marks on the surface of the burrs are part of the hardening process. 3. Wash the bean hopper and coffee container These marks do not affect the performance in warm soapy water, then rinse and dry. of the grinder or the taste of the coffee. Cleaning the burrs • Ensure the coffee grinder is switched off If the coffee grinder is used frequently (every and unplugged from the power outle
ページ17に含まれる内容の要旨
Care and Cleaning (continued) 3. Press and hold down the ‘UNLOCK’ button at the rear of the motor base and with the other hand turn the grind adjustment collar anti-clockwise until the graphic arrow on the collar is aligned with the arrow on the motor base, see figure 15. Figure 17 6. Clean the bottom burr using the burr- cleaning brush, see figure 18. Figure 15 4. Lift out the top burr from the grind adjustment collar using the handle, see figure 16. Clean using the burr-cleaning brush
ページ18に含まれる内容の要旨
Care and Cleaning (continued) Adjusting the burrs for wear Replacing the burrs The conical burrs are made of tool To inquire about having the burrs replaced hardened steel for extra long life. However contact the Sunbeam Consumer Hotline on after prolonged use the burrs will require Australia adjustment to compensate for wear. A sign of 1300 881 861 this is when the grinds are not as fine as they used to be, check by rubbing some of the New Zealand grinds between two fingers or for espres
ページ19に含まれる内容の要旨
Notes
ページ20に含まれる内容の要旨
Notes
