ページ1に含まれる内容の要旨
Conicaf� Burr
Conicaf� Burr Coffee Grinder
Instruction Bookf�et
EM0450
Pf�ease read these instructions carefuf�f�y
and retain for future reference.
ページ2に含まれる内容の要旨
Contents Sunbeam’s Safety Precautions 1 Features of your Conical Burr Coffee Grinder 2 Operating your Conical Burr Coffee Grinder 4 Adjusting the Grind Setting 6 Care and Cleaning 7 Ip ortant instructions – retain for future use.
ページ3に含まれる内容の要旨
Sunbea’s Safety Precautions SAFETY PRECAUSTIONS FOR YOUR • Do not place your hand in or near the burrs SUNBEAM COFFEE GRINDER while the grinder is in operation. • Check the grinding bowl for the presence of • Always place the unit on a flat, level surface. foreign objects before using. • Switch off and unplug at power point before • Always operate the grinder with the ground cleaning. coffee container properly inserted in the • Do not attempt to re-grind ground coffee. grinder. Sunbeam are v
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
Operating your Conicaf� Burr Coffee Grinder (continued) Heading 8. To grind coffee, press the group handle 9. When the basket is full, pull the group against the button located in the centre handle off the button. Collapse the coffee of the group handle locator, see figure 4. in the basket by tapping it on the bench and repeat until the desired amount of coffee has been ground. Note: Foreign objects like stones or twigs can sometimes be found in whole bean coffee and can cause the coffee g
ページ8に含まれる内容の要旨
A Hd eja ud sitn in gg the Grind Setting A starting point for gring settings: 2. For drip filter coffee machines, a good starting point is to use 8 grams (1 scoop) SETTING BREWING METHOD of coffee for every 4 cups of brew water as measured with the carafe. Finer grinds 2 – 6 Turkish usually require less coffee, but using too fine 12 – 16 Espresso a grind will result in a brew that is bitter in flavour. 12 – 16 Stove Top 3. For those that prefer weaker coffee, continue 20 – 23 Drip Fi
ページ9に含まれる内容の要旨
ページ10に含まれる内容の要旨
ページ11に含まれる内容の要旨
Care and Cf�eaning (continued) 9. Replace the top burr back into position Replacing the burrs in the grind adjustment collar. Ensure the To inquire about having the burrs replaced marker on the top burr is aligned with the contact the Sunbeam Consumer Hotline marker inside the grind adjustment collar on FreeCall and push firmly into place. Australia Turn clockwise to the desired grind setting. 1800 025 059 Adjusting the burrs for wear New Zealand The conical burrs are made of tool harden
ページ12に含まれる内容の要旨
12 Month Repf�acee nt Guarantee We are so confident of the quaf�ity of our product,shouf�d this appf�iance devef�op any a f�function within 12 o nths of purchase (3 Months coe rciaf� use) due to fauf�ty a teriaf�s or a nufacture, we wif�f� repf�ace it for you absof�utef�y free. Should you experience any difficulties Sunbeam Service Centres with your appliance, please phone our Sunbeam has established a network free call customer service line for of authorised service centres throu
ページ13に含まれる内容の要旨
