ページ1に含まれる内容の要旨
®
MODEL SB1052F TURN-X
14" X 40" LATHE w/DRO
Manual Insert
PHONE: (360) 734-1540 • www.southbendlathe.com
The Model SB1052F Lathe is the same machine as the Model SB1052 except for the following:
• Added a 2-Axis Fagor Digital Readout (DRO).
Except for the differences noted in this insert, all other content in the Model SB1052 Owner’s Manual
applies to this machine. Before operating your new lathe, you MUST read and understand this insert,
the entire Model SB1052 Owner’s Manual, and the Fago
ページ2に含まれる内容の要旨
Mfd. Since 12/13 Model SB1052F MAN UAL I NSE RT Model SB1052F 14" x 30" Turn-X Lathe with Fagor DRO Product Dimensions Weight........................................................................................................................................................... 2116 lbs. Width (side-to-side) x Depth (front-to-back) x Height......................................................... 70 x 32-1/4 x 54-1/2 in. Footprint (Length x Width)...............................................
ページ3に含まれる内容の要旨
Mfd. Since 12/13 Model SB1052F MAN UAL I NSE RT Main Specifications Operation Info Swing Over Bed.................................................................................................................................. 14.17 in. Distance Between Centers...................................................................................................................... 30 in. Max Weight Between Centers......................................................................................
ページ4に含まれる内容の要旨
Mfd. Since 12/13 Model SB1052F MAN UAL I NSE RT Construction Base.................................................................................................................................................... Cast Iron Headstock.......................................................................................................................................... Cast Iron End Gears.............................................................................................................
ページ5に含まれる内容の要旨
® 14" TURN-X TOOLROOM LATHE MODEL SB1039 14" X 40" MODEL SB1052 14" X 30" OWNER'S MANUAL © November, 2011 by South Bend Lathe Co. For Machines Mfg. Since 5/11
ページ6に含まれる内容の要旨
Scope of Manual This manual helps the reader understand the machine, how to prepare it for operation, how to control it during operation, and how to keep it in good working condition. We assume the reader has a basic understanding of how to operate this type of machine, but that the reader is not familiar with the controls and adjustments of this specific model. As with all machinery of this nature, learning the nuances of operation is a process that happens through training and experience.
ページ7に含まれる内容の要旨
Table of Contents INTRODUCTION ....................................................3 Test Run .............................................................26 About This Machine .............................................3 Spindle Break-In ................................................30 Foreword .............................................................3 Recommended Adjustments ..............................30 Capabilities .........................................................3 OPERATI
ページ8に含まれる内容の要旨
Configuration Examples .....................................50 ELECTRICAL ........................................................87 Power Feed .........................................................51 Electrical Safety Instructions ...........................87 Power Feed Controls ..........................................52 Correcting Phase Polarity Wiring .....................88 Setting Power Feed Rate ....................................53 Wiring Overview ..................................
ページ9に含まれる内容の要旨
® For Machines Mfg. Since 5/11 14" TURN-X Toolroom Lathe INTRODUCTION About This Machine Foreword Features "The screw cutting engine lathe is the oldest and These 16-Speed Gearhead Lathes are packed most important of machine tools and from it all with standard features and equipment, such other machine tools have been developed. It was as a complete coolant system, easy-to-clean the lathe that made possible the building of the chip drawer, one-shot way lubrication system, steamboat, the loco
ページ10に含まれる内容の要旨
® For Machines Mfg. Since 5/11 14" TURN-X Toolroom Lathe INTRODUCTION General Identification G F E D J H B C I K A U L T M N S R Q O P Figure 1. Identification. A. Headstock L. Longitudinal Leadscrew B. D1-5 Camlock MT#5 Spindle M. Feed Rod C. 3-Jaw Chuck 8" N. Coolant Reservoir & Pump Access D. Chuck Guard w/Safety Switch O. Carriage (see Page 6 for details) E. Steady Rest P. Safety Foot Brake F. Follow Rest Q. Chip Drawer G. Halogen Work Lamp R. Micrometer Stop H. 4-Way Tool Post S. Two-Speed
ページ11に含まれる内容の要旨
® For Machines Mfg. Since 5/11 14" TURN-X Toolroom Lathe INTRODUCTION Headstock Controls & A Components Refer to Figures 2–7 and the following descriptions to become familiar with the basic E B controls of this lathe. Master Power Switch F C The rotary switch shown in Figure 2 toggles incoming power ON and OFF to the lathe D controls. It also prevents the electrical cabinet door from being opened when the switch is ON. G Figure 4. Headstock controls. A. Spindle Speed Charts: Display the M
ページ12に含まれる内容の要旨
® For Machines Mfg. Since 5/11 14" TURN-X Toolroom Lathe INTRODUCTION M. Compound Rest Handwheel: Moves the tool Control Panel toward and away from the workpiece at the preset angle of the compound rest. N. Coolant Flow Control Lever: Controls the flow of coolant from the nozzle. I J O. One-Shot Oiler: Draws oil from the apron reservoir to lubricate the carriage ways through various oil ports. P. Carriage Lock: Secures the carriage in place H K when it should not move. Q . Thread Dial and
ページ13に含まれる内容の要旨
® For Machines Mfg. Since 5/11 14" TURN-X Toolroom Lathe INTRODUCTION Tailstock End Gears Configuring the end gears shown in Figure 8 will control the speed of the leadscrew AB Z AA Y for threading or the feed rod for power feed operations. The rotational speed of these components depends not only on the end gear configuration, but the spindle speed as well. AC AD AF AE Figure 7. Tailstock controls. End Gears Y. Quill Handwheel: Moves the quill toward or away from the spindle. Z. Graduated
ページ14に含まれる内容の要旨
® For Machines Mfg. Since 5/11 14" TURN-X Toolroom Lathe INTRODUCTION Product Specifications P.O. Box 2027, Bellingham, WA 98227 U.S.A. PHONE: (360) 734-1540 • © South Bend Lathe Co. www.southbendlathe.com MODEL SB1039 & SB1052 14" 16-SPEED TOOLROOM LATHES Model Number SB1039 SB1052 Product Dimensions Weight 2420 lbs. 2094 lbs. Width (side-to-side)/Depth 3 1 3 1 3 80 ⁄4" X 32 ⁄8" X 54 ⁄8" 70" X 32 ⁄8" X 54 ⁄8" (front-to-back)/Height 3 1 1 Foot Print (Width/Depth) 80 ⁄4" X 19 ⁄2" 70" X 19 ⁄2"
ページ15に含まれる内容の要旨
® For Machines Mfg. Since 5/11 14" TURN-X Toolroom Lathe INTRODUCTION Model Number SB1039 SB1052 Main Motor Type TEFC Induction Horsepower 5 HP at 3450 RPM, 2.5 HP at 1725 RPM Voltage 220V Phase 3-Phase Amps 14A at 3450 RPM, 10A at 1725 RPM Speed 3450/1725 RPM Cycle 60 Hz Power Transfer V-Belt & Gear Bearings Shielded & Permanently Sealed Coolant Motor Type TEFC Induction 1 Horsepower ⁄8 HP Voltage 220V Phase 3-Phase Amps 0.4A Speed 3450 RPM Cycle 60 Hz Power Transfer Direct Drive Bearings Shiel
ページ16に含まれる内容の要旨
® For Machines Mfg. Since 5/11 14" TURN-X Toolroom Lathe INTRODUCTION Model Number SB1039 SB1052 Headstock Information Spindle Bore 1.653" Spindle Taper MT#5 Number of Spindle Speeds 16 Range of Spindle Speeds 50–2570 RPM Spindle Type D1-5 Camlock Spindle Bearings Tapered Roller Tailstock Information 3 Tailstock Quill Travel 4 ⁄8" Tailstock Taper MT#3 Tailstock Barrel Diameter 1.968" Threading Information Number of Longitudinal Feeds 17 Range of Longitudinal Feeds 0.002"–0.067" Number of Cross F
ページ17に含まれる内容の要旨
® For Machines Mfg. Since 5/11 14" TURN-X Toolroom Lathe INTRODUCTION Model Number SB1039 SB1052 Construction Headstock Cast Iron Headstock Gears Flame-Hardened Steel Bed Meehanite Castings with Precision Hardened-and-Ground Ways Stand Cast Iron Paint Urethane Other Country of Origin Taiwan (Some Components Made in USA & Japan) Warranty 1 Year Serial Number Location ID Label on Front of Headstock Assembly Time Approximately 1 Hour Sound Rating at Idle 76 dB -11-
ページ18に含まれる内容の要旨
® For Machines Mfg. Since 5/11 14" TURN-X Toolroom Lathe SAFETY Understanding Risks of Machinery Operating all machinery and machining equipment can be dangerous or relatively safe depending on how it is installed and maintained, and the operator's experience, common sense, risk awareness, working conditions, and use of personal protective equipment (safety glasses, respirators, etc.). The owner of this machinery or equipment is ultimately responsible for its safe use. This responsibility inc
ページ19に含まれる内容の要旨
® For Machines Mfg. Since 5/11 14" TURN-X Toolroom Lathe SAFETY Entanglement: Loose clothing, gloves, neckties, Chuck Keys or Adjusting Tools: Tools used to jewelry or long hair may get caught in adjust spindles, chucks, or any moving/ moving parts, causing entanglement, rotating parts will become dangerous amputation, crushing, or strangulation. projectiles if left in place when the machine Reduce this risk by removing/securing is started. Reduce this risk by developing these items so they
ページ20に含まれる内容の要旨
® For Machines Mfg. Since 5/11 14" TURN-X Toolroom Lathe SAFETY Additional Metal Lathe Safety Speed Rates. Operating the lathe at the wrong Clearing Chips. Metal chips can easily cut bare speed can cause nearby parts to break or the skin—even through a piece of cloth. Avoid workpiece to come loose, which will result in clearing chips by hand or with a rag. Use a dangerous projectiles that could cause severe brush or vacuum to clear metal chips. impact injuries. Large or non-concentric workpi
