ページ17に含まれる内容の要旨
Operating the Tractor WARNING STOPPING THE TRACTOR & If you do not understand how a specific control functions, or have not yet thoroughly read the ENGINE FEATURES & CONTROLS section, do so now. 1. Setting the cruise control to neutral and taking your foot off the ground speed control pedals will stop Do NOT attempt to operate the tractor without tractor movement. For emergency stopping first becoming familiar with the location and depress the brake pedal. function of ALL controls. 2. Engage th
ページ18に含まれる内容の要旨
Operating the Tractor Moving the right control lever forward (C, Figure 7) will PUSHING & TOWING THE TRACTOR send pressurized hydraulic fluid to the far right quick con- 1. Disengage the PTO and turn the engine off. nector. 2. Shift the two speed control into neutral and release Moving the right control lever backward (D, Figure 7) will the parking brake. send pressurized hydraulic fluid to the right middle quick The tractor can now be pushed by hand . TOWING connector. THE TRACTOR WITH ANOTHER
ページ19に含まれる内容の要旨
Operating the Tractor A B C Figure 8. Quick Connectors Figure 9. Install Quick Connector Covers A. Hoses B. Quick Connector C. Connector Covers Connecting Hydraulic Hoses Bumper Removed For Clarity The female quick connectors (B, Figure 8) require a 1/4” male nose piece fitting (part number 173359). Connect the hoses from the attachment hydraulic cylin- ders (A, Figure 8) to the quick connectors (B) located under the left foot rest. Refer to the flow diagrams in Figure 6 to determine the corre
ページ20に含まれる内容の要旨
Operating the Tractor MOWER DECK REMOVAL & INSTALLATION NOTE: Perform mower removal and installation on a hard, level surface such as a concrete floor. WARNING Engage parking brake, disengage PTO, stop engine and remove key before attempting to install or remove the mower. 54” Mower Removing the Mower Deck 1. Start the engine 2. Set the mower cutting height to minimum. 48” Mower & 3. Fully raise the attachment lift. 60” Mower 4. Stop the engine. 48” AND 60” MOWERS Figure 12. Pivoting the Gauge W
ページ1に含まれる内容の要旨
How to use this file
Print Vendor
Operator’s Manuals
Instructions
Paper Size: 11x17
Body - 50 lbs brilliant white offset or equivalent
Cover - on pre-printed two tone “Swash” stock.
Press: Body - 1 color, 2-sided
Cover - 1 color, 1 sided
Bindery: Saddle stitch, face trim *if too thick for saddle stitch, tape bind
Covers: FRONT COVER is present at the beginning of the file.
BACK COVER is the page immediately after the front cover.
The part number for this manual (typically a
ページ2に含まれる内容の要旨
THIS PAGE INTENTIONALLY BLANK (FOR PLACEMENT ONLY - DO NOT PRINT)
ページ3に含まれる内容の要旨
OPERATOR’S MANUAL Legacy / 2000 / 2900 Series 20HP Tractors 25HP Tractors Mfg. No. Description Mfg. No. Description 1692870 Legacy, 20HP Hydro 1692872 Legacy, 25HP Hydro 1693114 Legacy, 20HP Hydro (Export) 1693116 Legacy, 25HP Hydro (Export) 1693124 2020, 20HP Hydro 1693126 2025, 25HP Hydro 1693132 2920, 20HP Hydro 1693134 2925, 25HP Hydro 1693219 Legacy, 20HP Hydro 1693561 Legacy, 25HP w/ Hydraulics 1693220 2920, 20HP Hydro 1693562 2025, 25HP Hydro w/ Hydraulics 1693221 2020, 20HP Hydro 169356
ページ4に含まれる内容の要旨
MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 www.simplicitymfg.com © Copyright 2003 Simplicity Manufacturing, Inc. All Rights Reserved. Printed in USA.
ページ5に含まれる内容の要旨
Table of Contents Safety Rules & Information.................................2 Troubleshooting, Adjustments & Service .......27 Troubleshooting the Tractor..................................27 Identification Numbers........................................5 Safety Decals..........................................................6 Troubleshooting the Mower ..................................28 PTO Clutch Adjustment ........................................29 Features & Controls .......................
ページ6に含まれる内容の要旨
Safety Rules & Information Read these safety rules and follow them closely. Failure to obey these rules could result in loss of control of unit, severe personal injury or death to you, or bystanders, or damage to property or equipment. This mowing deck is capable of amputating hands and feet and throwing objects. The triangle in text signifies important cautions or warnings which must be followed. GENERAL OPERATION Use extra care when loading or unloading the unit into a trailer or tr
ページ7に含まれる内容の要旨
Safety Rules and Information SLOPE OPERATION WARNING Slopes are a major factor related to loss-of-control and tip- Never operate on slopes greater than 17.6 percent over accidents, which can result in severe injury or death. (10°) which is a rise of 3-1/2 feet (106 cm) vertically in All slopes require extra caution. If you cannot back up the 20 feet (607 cm) horizontally. slope or if you feel uneasy on it, do not operate on it. When operating on slopes use additional wheel Control of a ride-on
ページ8に含まれる内容の要旨
Safety Rules & Information SERVICE AND MAINTENANCE Grass catcher components are subject to wear, dam- Use extra care in handling gasoline and other fuels. age, and deterioration, which could expose moving They are flammable and vapors are explosive. parts or allow objects to be thrown. Frequently check a) Use only an approved container. components and replace with manufacturer’s recom- b) Never remove gas cap or add fuel with the mended parts, when necessary. engine running. Allow engine to
ページ9に含まれる内容の要旨
S SA AM MP PL LE E S SA AM MP PL LE E Identification Numbers North American Models Mfg. No.: 169XXXX Serial No.: XXXXX 2002 dB(A) Mower ID Tag kW: XXX CE Models Tractor ID Tag Engine RPM XXXX LpA: XXX dB(A) Vibration @ Wheel: XXX m/s² Vibration @ Seat: XXX m/s² PRODUCT REFERENCE DATA Simplicity Mfg. Inc. Model Description Name/Number Port Washington, WI USA 53074-0997 Unit MFG Number Unit SERIAL Number When contacting your authorized dealer for replace- ment parts, service, or information yo
ページ10に含まれる内容の要旨
1718613 Safety Rules & Information All DANGER, WARNING, CAUTION and instructional SAFETY DECALS messages on your rider and mower should be carefully This unit has been designed and manufactured to pro- read and obeyed. Personal bodily injury can result when vide you with the safety and reliability you would expect these instructions are not followed. The information is for from an industry leader in outdoor power equipment your safety and it is important! The safety decals below manufacturin
ページ11に含まれる内容の要旨
NO NOTES TES 7
ページ12に含まれる内容の要旨
Features & Controls Please take a moment and familiarize D E C F yourself with the name, location, and B function of these controls so that you will A better understand the safety and operating G instructions provided in this manual. P H Q I Figure 1. Tractor & Mower Controls R A. Choke B. Rear PTO Switch (Optional) C. Throttle D. Headlight Switch E. Dashboard Display F. Cutting Height Adjust / Spout Rotation G. Ignition Switch H. Front PTO Switch J I. Parking Brake K J. Brake Pedal K. Ground S
ページ13に含まれる内容の要旨
Features & Controls Control Functions continued… N. Cruise Control The cruise control is used to set a constant FORWARD G. Ignition Switch ground speed. This is useful when mowing long rows or The ignition switch starts and stops the engine, it has traveling long distances. three positions: To engage the cruise control, make certain forward area OFF Stops the engine and shuts off the is clear and slide the cruise control lever forward to the electrical system. desired ground speed. Move the le
ページ14に含まれる内容の要旨
Features & Controls DASHBOARD DISPLAY FUNCTIONS Models with Air Cooled Engines The dashboard display shows a variety of engine opera- tion and control status information, as explained in the A B C D E descriptions below. A. Rear PTO Light Indicates that the optional rear PTO switch is in the ON position. B. Cruise Control Light 18 14 Indicates that the cruise control is engaged. 8 C. Hour Meter Displays number of hours the unit has been operated. D. Front PTO Light H G F Indicates the front PTO
ページ15に含まれる内容の要旨
Features & Controls SAFETY INTERLOCK SYSTEM This unit is equipped with safety interlock switches and other safety devices. These safety systems are present for your safety, do not attempt to bypass safety switches, and never tamper with safety devices. Check their operation regularly. Operational SAFETY Checks Your unit is equipped with a seat switch safety sys- tem. Check the seat switch operation every fall and spring with the following tests. Figure 4. Seat Switch Safety System Test 1 — Eng
ページ16に含まれる内容の要旨
Operating the Tractor GENERAL OPERATING SAFETY WARNING Before first time operation: Never allow passengers to ride on the unit. Be sure to read all information in the Safety and Operation sections before attempting to operate this Before leaving the operator’s position for any tractor and mower. reason, engage the parking brake, disengage the Become familiar with all of the controls and how to PTO, stop the engine and remove the key. stop the unit. To reduce fire hazard, keep the engine, tra
