Shindaiwa EB802の取扱説明書

デバイスShindaiwa EB802の取扱説明書

デバイス: Shindaiwa EB802
カテゴリ: 送風機
メーカー: Shindaiwa
サイズ: 5.58 MB
追加した日付: 7/12/2013
ページ数: 60
説明書を印刷

ダウンロード

使い方は?

私たちの目的は、皆様方にデバイスShindaiwa EB802の取扱説明書に含まれたコンテンツを可能な限り早く提供することです。オンラインプレビューを使用すると、Shindaiwa EB802に関してあなたが抱えている問題に対する解決策の内容が素早く表示されます。

便宜上

説明書Shindaiwa EB802をこちらのサイトで閲覧するのに不都合がある場合は、2つの解決策があります:

  • フルスクリーン表示 – 説明書を(お使いのコンピュータにダウンロードすることなく)便利に表示させるには、フルスクリーン表示モードをご使用ください。説明書Shindaiwa EB802のフルスクリーン表示を起動するには、全画面表示ボタンを押してください。
  • コンピュータにダウンロード - Shindaiwa EB802の説明書をお使いのコンピュータにダウンロードし、ご自身のコレクションに加えることもできます。デバイス上のスペースを無駄にしたくない場合は、いつでもManualsBaseサイトでダウンロードすることもできます。
Shindaiwa EB802 取扱説明書 - Online PDF
Advertisement
« Page 1 of 60 »
Advertisement
印刷版

多くの人々は画面表示ではなく印刷された説明書を読むほうを好みます。説明書を印刷するオプションも提供されており、上記のリンクをクリックすることによりそれを利用できます - 説明書を印刷。説明書Shindaiwa EB802を全部印刷する必要はなく、選択したページだけを印刷できます。紙を節約しましょう。

要旨

次のページにある説明書Shindaiwa EB802の内容のプレビューは、以下にあります。次のページにある説明書の内容をすぐに表示したい場合は、こちらをご利用ください。

内容要旨
ページ1に含まれる内容の要旨

English .......................1
Español ...............SP_1
Francais ..............FR_1
SHINDAIWA OWNER’S/OPERATOR’S MANUAL
EB802 BLOWER
EB802RT BLOWER
EB802RT
EB802
WARNING!
Minimize the risk of injury to yourself and others! Read this manual
and familiarize yourself with the contents. Always wear eye and hearing
protection when operating this unit.
Part Number 68242-94311 Rev. 6/08

ページ2に含まれる内容の要旨

Introduction Attention Statements The Shindaiwa blower has been designed Throughout this manual are special Read and follow this manual. and built to deliver superior performance “Attention Statements”. Failure to do so could result and reliability without compromise to in serious injury. quality, comfort, safety, or durability. WARNING! A statement preceded by Wear eye and hearing The information contained in this manual the triangular Attention Symbol and protection at all times during

ページ3に含まれる内容の要旨

General Safety Instructions Work Safely WARNING! If fuel leaks are evident, stop using the Blowers operate at a very high speed and Minimize the Risk of Fire unit immediately. Fuel leaks must be can do serious damage or injury if they are repaired before using the unit. misused or abused. Never allow a person NEVER smoke or light fires near the unit. ALWAYS move the unit to a place well without training or instruction to operate ALWAYS stop the engine and allow it to away from a fuel sto

ページ4に含まれる内容の要旨

The Properly Equipped Operator Wear close-fitting clothing to protect legs and arms. Gloves offer added protection and are strongly recommended. Do not wear clothing Wear hearing protection or jewelry that could get caught in machinery when operating this unit. or underbrush. Secure hair so it is above shoulder level. NEVER wear shorts! Always wear eye protection such as a face shield or goggles while operating this unit. Never operate the blower when visibility is poor. Wear a dust

ページ5に含まれる内容の要旨

Unit Description Stop Switch EB802 Spark Plug Engine Cover Throttle Lever Starter Handle Volute Case Exhaust Outlet Air Cleaner Cover Fuel Tank EB802RT Stop Switch Throttle Lever Throttle Assembly Fuel Filler Cap Swivel Tube Flexible Tube 90° Discharge Tube Figure 3 Specifications Model EB802 EB802RT Dry Weight (without Blower Tubes) 10.4 kg/22.9 lbs 10.3 kg/22.7 lbs Dimensions (L xWxH) 325 x 465 x 545 Engine Type 2 cycle air-cooled gasoline engine, vertical-cylinder Bore & Stroke 49 x

ページ6に含まれる内容の要旨

Assembly Prior to Assembly Using Figure 3 as a guide, familiarize your- ■ Power unit and blower assembly. ■ Lead wire assembly (anti-static). self with the blower and its components. Carefully inspect all components for damage. ■ Flexible tube, swivel tube, two nozzles Understanding the unit helps ensure top and straight tube. performance, longer service life, and safer IMPORTANT! ■ Handgrip (Non RT unit only). operation. The terms “left”, “left-hand”, “LH”; “right”, ■ Two tube clamps (102

ページ7に含まれる内容の要旨

Assembly (continued) Assembling the RT Blower IMPORTANT! This unit is equipped with a static dis- charge reduction wire. This wire helps Throttle direct static buildup into the air stream Assembly Swivel reducing the felt amount to the operator. Tube 1. Place the blower upright on the ground or a sturdy work surface and note parts orientation as shown in Figure 7. 2. Remove static wire from package and Flexible Tube fix eyelet to right hand engine cover Long Nozzle (ø74 mm) screw. See Fi

ページ8に含まれる内容の要旨

Mixing fuel Examples of 50:1 mixing quantities CAUTION! CAUTION! Gasoline 2-cycle mixing oil This engine is designed to operate ■ Never use any type of gasoline liters milliliters on a 50:1 mixture consisting of containing more than 10% alcohol 2.5 - 1 50 ml by volume! Some types of gasoline unleaded gasoline and ISO-L-EGD 5 - 1 100 ml contain alcohol as an oxygenate. or JASO FC class 2-cycle mixing oil 10 - 1 200 ml Oxygenated gasoline may cause only. Use of non-approved mixing 20 - 1 40

ページ9に含まれる内容の要旨

Starting the Engine WARNING! WARNING! CAUTION! Danger from rotating Danger from thrown dust or The recoil starter can be damaged debris! impeller! by abuse! The impeller will rotate whenever Always wear eye protection when operating this machine! Never direct ■ Never pull the starter cord to its full the blower is operated! Never oper- length! ate this blower unless the intake the blower stream toward people or animals! cover and blower tubes are properly ■ Always engage the starter befor

ページ10に含まれる内容の要旨

Starting the Engine (continued) If The Engine Does Not Start Repeat the appropriate starting procedures for warm or cold engine. If the engine still will not start, follow the “Starting a Flooded Engine” procedure. Starting A Flooded Engine 1. Disconnect the spark plug lead, and 3. With the spark plug removed, open 5. Repeat the starting procedures for a remove the spark plug (see page 12 for the choke, put the throttle lever in the warm engine. procedures). full throttle position, then cle

ページ11に含まれる内容の要旨

Throttle Control RT The RT blower is equipped with a multi- func- On the opposite side, a two position “Lim- tion throttle control. The “Cruise” function iter” control allows full engine speed when allows the operator to use a thumb controlled set for “Turbo” or limits the throttle to a lever for constant speed use without using the pre-set engine speed when set to low noise throttle trigger. This is useful for limiting the (dB) setting. fatigue caused from holding the throttle for extended

ページ12に含まれる内容の要旨

Adjusting The Harness The Shindaiwa blower features an To tighten straps… advanced harness system that helps B B ensure maximum operator comfort and Quick-adjust buckle ease of operation. Comfortable back pads Pull strap ■ The shoulder harness is filled with soft loops padding for reduced operator fatigue. down. ■ The simplified adjustment system makes it easy to match the harness to every body size and type. A To loosen straps… Pull the quick-adjust A buckles up… …and pull the strap

ページ13に含まれる内容の要旨

Maintenance IMPORTANT! WARNING! WARNING! MAINTENANCE, REPLACEMENT Before performing any Non-standard parts may OR REPAIR OF EMISSION CONTROL maintenance, repair or cleaning work not operate properly with your unit DEVICES AND SYSTEMS MAY BE PER- on the unit, make sure the engine is and may cause damage and lead to FORMED BY ANY REPAIR ESTABLISH- completely stopped. Disconnect the personal injury. MENT OR INDIVIDUAL, HOWEVER, spark plug wire before performing WARRANTY REPAIRS MUST BE PER-

ページ14に含まれる内容の要旨

Maintenance Every 10/15 Hours 1. Use the spark plug wrench to remove CAUTION! the spark plug. Never allow dirt or debris to enter 2. Clean and adjust the spark plug gap the cylinder bore! Before removing to 0.6mm (0.024”). If the plug must be the spark plug, thoroughly clean the replaced, use a Champion RCJ6Y or spark plug and cylinder head area! equivalent type plug of the correct heat Allow the engine to cool before serv- range. icing the spark plug! Cylinder threads 3. Install the sp

ページ15に含まれる内容の要旨

Maintenance (Continued) 135-Hour Maintenance Every 135 hours of operation, remove and Muffler clean the muffler. WARNING! Never operate this blower with a damaged or missing muffler or spark arrester! Operating with Arrester Arrester Screen Tail Pipe missing or damaged exhaust com- Screen Cover ponents is a fire hazard, and can also damage your hearing! Remove the Muffler. 1. Use the 4mm hex wrench to remove the five engine cover screws, and then slide the cover from the engine. 2. Use

ページ16に含まれる内容の要旨

Troubleshooting Guide ENGINE DOES NOT START What To Check Possible Cause Remedy Faulty recoil starter. Does the engine NO Consult with an authorized servicing crank? Fluid in the crankcase. dealer. YES Internal damage. NO Good compression? Loose spark plug. Tighten and re-test. YES Excess wear on cylinder, piston, Consult with an authorized servicing rings. dealer. Does the tank contain NO Fuel incorrect, stale, or Refill with fresh, clean unleaded gasoline fresh fuel of the proper contamin

ページ17に含まれる内容の要旨

Troubleshooting Guide LOW POWER OUTPUT What To Check Possible Cause Remedy Operator is overworking the unit. Operate at slower rate. Is the engine Carburetor mixture is too lean. Consult with an authorized servicing overheating? dealer. Improper fuel ratio. Refill with clean fresh unleaded gasoline with a pump octane of 87 or higher, mixed with Premium 2-cycle mixing oil at a 50:1 gasoline/oil ratio. Fallen leaves or debris on intake cover.. Clean intake cover.. Fan, fan cover, cylinder fin

ページ18に含まれる内容の要旨

Troubleshooting Guide ADDITIONAL PROBLEMS What To Check Possible Cause Remedy Clogged air filter. Clean or replace the air filter. Clogged fuel filter. Replace the fuel filter. Poor acceleration. Lean fuel/air mixture. Consult with an authorized servicing dealer. -1 Idle speed set too low. Adjust: 2,000 (±200) min . Ignition switch turned off. Reset the switch and re-start. Fuel tank empty. Refuel. See Fuel section of manual. Clogged fuel filter. Replace fuel filter. Engine stops abruptly.

ページ19に含まれる内容の要旨

The following statement only applies to United States and its territories Shindaiwa Corporation Federal Emission Design And Defect Limited Warranty Utility And Lawn And Garden Engines Shindaiwa Corporation warrants to the initial purchaser and MAINTENANCE AND REPAIR REQUIREMENTS each subsequent owner, that this utility equipment engine You are responsible for the proper use and maintenance of the engine. (herein engine) is designed, built and equipped to conform at You should keep all receipt

ページ20に含まれる内容の要旨

NOTES ©2008 Shindaiwa, Inc. Shindaiwa Inc. Shindaiwa Corporation Part Number 68242-94311 11975 S.W. Herman Rd. Head Office: 6-2-11 Ozuka Revision 6/08 Tualatin, Oregon 97062 Nishi, Asaminami-Ku Shindaiwa is a registered trademark Telephone: 503 692-3070 Hiroshima, 731-3167, Japan of Shindaiwa, Inc. Fax: 503 692-6696 Telephone: 81-82-849-2220 Specifications subject to change without notice. www.shindaiwa.com Fax: 81-82-849-2481 20


類似の説明書
# 取扱説明書 カテゴリ ダウンロード
1 Shindaiwa 68241-94310 取扱説明書 送風機 0
2 Shindaiwa 82051 取扱説明書 送風機 1
3 Shindaiwa EB2510 取扱説明書 送風機 7
4 Shindaiwa 68907-94311 取扱説明書 送風機 0
5 Shindaiwa 82050 取扱説明書 送風機 0
6 Shindaiwa 68915-94310 取扱説明書 送風機 0
7 Shindaiwa 68242-94311 取扱説明書 送風機 0
8 Shindaiwa EB3410 取扱説明書 送風機 13
9 Shindaiwa EB3410/EVC 取扱説明書 送風機 6
10 Shindaiwa EB212 取扱説明書 送風機 0
11 Shindaiwa EB254 取扱説明書 送風機 0
12 Shindaiwa EB344 取扱説明書 送風機 0
13 Shindaiwa EB2510/EVC 取扱説明書 送風機 3
14 Shindaiwa EB344EF13 取扱説明書 送風機 0
15 Shindaiwa EB501/EVC 取扱説明書 送風機 2
16 AEG HG654320NM 取扱説明書 送風機 2
17 Air King Exhaust Fan AK110 取扱説明書 送風機 1
18 Air King Exhaust Fan AK50LS 取扱説明書 送風機 1
19 Air King AK90 取扱説明書 送風機 13
20 Air King Exhaust Fan AK110PN 取扱説明書 送風機 1