ページ1に含まれる内容の要旨
FS15
FLEX-WING
ROTARY CUTTER
Published 07-05 P/N 00773425MB
MASTER PARTS BOOK
S/N 00101 TO 10429
PARTS LISTING
®
Rhino
An Alamo Group Company
1020 S. Sangamon Ave.
Gibson City, Il 60936
1-800-446-5158
Email: parts@servis-rhino.com
© 2005 Alamo Group Inc.
ページ2に含まれる内容の要旨
TO THE OWNER/OPERATOR/DEALER All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents. BEFORE YOU START!! Read the safety messages on the implement and shown in your manual. Observe the rules of safety and common sens
ページ3に含まれる内容の要旨
PARTS SECTION Parts Section – 1
ページ4に含まれる内容の要旨
PARTS ORDERING GUIDE The following instructions are offered to help eliminate needless delay and error in processing purchase orders for the equipment in this section. 1. The Parts Section is prepared in logical sequence and grouping of parts that belong to the basic machine featured in this manual. Part Numbers and Descriptions are given to help locate the parts and quantities required. 2. The Purchase Order must include the name and address of the person or organization ordering the parts,
ページ5に含まれる内容の要旨
PART NAME INDEX AXLE ASSEMBLY - CTR & WING S/N 00101 - 10147 OCT 1977 - JAN 1988.................................................................... 5 AXLE ASSEMBLY - CTR & WING S/N 10148 - 10429 JAN 1988 - MAY 1988.................................................................... 6 BLADE BAR ASSEMBLY - CTR HEAVY DUTY S/N 01162 - 10429 DEC 1980 - MAY 1988.............................................. 7 BLADE BAR ASSEMBLY - CTR STANDARD S/N 00101 - 01162 OCT 1977 - DEC 1980 ....................
ページ6に含まれる内容の要旨
PART NAME INDEX TONGUE ASSEMBLY S/N 00101 - 10429 OCT 1977 - MAY 1988.................................................................................... 73 TORQUE LIMITER ASSEMBLY S/N 00101 - 10001 OCT 1977 - AUG 1987..................................................................... 74 TORQUE LIMITER ASSEMBLY S/N 10001 - 10429 AUG 1987 - MAY 1988 .................................................................... 75 WEIGHT BOX S/N 00101 - 10429 OCT 1977 - MAY 1988...........................
ページ7に含まれる内容の要旨
AXLE ASSEMBLY - CTR & WING S/N 00101 - 10147 OCT 1977 - JAN 1988 ITEM PART NO. QTY. DESCRIPTION 1 0656060100 1 CENTER AXLE WELD NOT SHOWN 0656280100 1 DOUBLE AXLE WELD SHOWN 5 0656070110 1 AXLE WLD R.H. ONLY 0656070100 1 AXLE ASSY 6 0656070210 1 AXLE WLD L.H. ONLY 0656070200 1 AXLE ASSY 7 20BH5012 4 PIN-SPIRAL 5/16 X 1 1/2 * 8 15B1600 4 WASHER 1 SAE P * 9 65106A4 4 WLDMT,AXLE PIVOT PIN * 10 D121 1 DECAL ADJ-NUTS 11 D301 1 DECAL,RHINO 15 0652140220 1 WLDMT, AXLE ARM - LEFT ** 0652140210 15 LEFT A
ページ8に含まれる内容の要旨
AXLE ASSEMBLY - CTR & WING S/N 10148 - 10429 JAN 1988 - MAY 1988 ITEM PART NO. QTY. DESCRIPTION 1 00756458 1 AXLE CENTER ASSY NOT SHOWN 00756456 1 AXLE DOUBLE CENTER SHOWN 2 00756461 1 AXLE ARM ASSY (R.H.), COMPLETE W/1 HUB 3 00756464 1 AXLE ARM ASSY(L.H.), COMPLETE W/1 HUB 4 00756455 1 DOUBLE AXLE ARM WELD SHOWN 00756457 1 CENTER AXLE WELD NOT SHOWN 5 00756459 1 AXLE WELD (R.H.) ONLY 6 00756462 1 AXLE WELD (L.H.) ONLY 7 20BH5012 4 PIN-SPIRAL 5/16 X 1 1/2 * 8 15B1600 4 WASHER 1 SAE P * 9 65106A4
ページ9に含まれる内容の要旨
BLADE BAR ASSEMBLY - CTR HEAVY DUTY S/N 01162 - 10429 DEC 1980 - MAY 1988 ITEM PART NO. QTY. DESCRIPTION 1 0656160100 1 WLDMT, BLADE CARRIER 2 0652010030 2 BLADE, CCW/CW FLAT 3 571044 2 BOLT SHOULDER 4 571045 2 WASHER 5 5GL16140 2 LOCKNUT 1 -14 LH TLN PL 6 0622010330 2 BLADE, CCW FAN 7 0656150200 2 WASHER,SQ HOLE HT Note: This carrier was optional until Dec. 1980 then, it became standard. These blade bolts have square shoulders. The blade bolt hole is 1-25/64 diameter. Check Before Ordering Part
ページ10に含まれる内容の要旨
BLADE BAR ASSEMBLY - CTR STANDARD S/N 00101 - 01162 OCT 1977 - DEC 1980 ITEM PART NO. QTY. DESCRIPTION 1 701021R 1 CARRIER,BAR BLADE 2 701022R 2 BLADE 3 36107A2ALH 2 BOLT SHOULDER L.H THREAD 4 481043 2 SPCR 1-1/4 X 3/4 X 5/16 5 5GL12160 2 LOCKNUT TLM 3/4 NF PLB L.H. THREAD 6 71103 2 BLD,OFT/FAN,CCW Note: This blade carrier was standard till Dec. 1980. These Blade bolts have round shoulder. The blade bolt hole is 1-1/64 dia. Check Before Ordering Parts FS15 Master Parts Book (July-05) ©2005 Alamo
ページ11に含まれる内容の要旨
BLADE BAR ASSEMBLY - WING HEAVY DUTY S/N 01162 - 10429 DEC 1980 - MAY 1988 ITEM PART NO. QTY. DESCRIPTION 1 0656180100 1 WLDMT, BLADE CARRIER, FS15 2 0652010030 2 BLADE, CCW/CW FLAT 3 0622010330 2 BLADE, CCW FAN 0652010330 3 BLADE, CW FAN 4 571044 2 BOLT SHOULDER 5 571045 2 WASHER 6 5GL16140 2 LOCKNUT 1 -14 LH TLN PL 7 0656150200 2 WASHER,SQ HOLE HT Note: This was optional till Dec. 1980. These blades bolts have square shoulders. The blade bolt hole is 1-25/64 dia. Check Before Ordering Parts FS
ページ12に含まれる内容の要旨
BLADE BAR ASSEMBLY - WING STANDARD S/N 01162 - 10429 OCT 1977 - DEC 1980 ITEM PART NO. QTY. DESCRIPTION 1 711021 1 BLADE CARRIER 2 701022R 2 BLADE 0656240000 2 BLADE STD FAN 3 71103 2 BLD,OFT/FAN,CCW 4 36107A2ALH 2 BOLT SHOULDER 5 5312316 2 WASHER (SPECIAL) 6 5GL12160 2 LOCKNUT TLM (LH) 3/4 NF PLB Note: This blade carrier was optional till Dec. 1980. The blade bolt hole is 1-1/64 dia. Check Before Ordering Parts FS15 Master Parts Book (July-05) ©2005 Alamo Group Inc. Parts Section – 10
ページ13に含まれる内容の要旨
BLADE PAN ASSEMBLY - CTR HEAVY DUTY S/N 01162 - 10429 DEC 1980 - MAY 1988 ITEM PART NO. QTY. DESCRIPTION 1 0656150100 1 BALDE CARRIER WELDMENT 2 701332 1 DISHPAN 3 0652010030 2 OFFSET FLAT BLADE 0652010030 3 HARD SURFACED OFFSET FLAT BLADE 4 0622010330 2 OFFSET FAN BLADE 5 571044 2 OFFSET HARD SURFACED FAN BLADE 6 7AH5101816 4 BOLT 7 0656150200 2 SPACER WASHER 8 571045 2 SHOULDER BOLT 9 W67 4 HARD WASHER 10 00749136 4 LOCKNUT 11 5GL1640 2 LOCKNUT L.H. THREAD Note: This carrier was optional until
ページ14に含まれる内容の要旨
BLADE PAN ASSEMBLY - CTR STANDARD S/N 00101 - 01162 OCT 1977 - DEC 1980 ITEM PART NO. QTY. DESCRIPTION 1 701333 1 CARRIER BLADE WELDMENT 2 701332 1 DISHPAN 3 701022R 2 BLADE, OFFSET FLAT 4 71103 2 BLADE, OFFSET FAN HS71103 2 BLADE OFFSET FAN (HARD SURFACED) 5 36107A2ALH 2 SHOULDER BLADE BOLT 6 7AH5101816 4 BOLT 7 671044 2 SPACER WASHER 8 681064 2 WASHER (HARDENED) 9 W67 4 WASHER (HARDENED) 10 5GR10180 4 NUT-TOPLOCK 11 5GL12160 2 NUT-TOPLOCK LH THREAD Note: This blade carrier was standard till De
ページ15に含まれる内容の要旨
BLADE PAN ASSEMBLY - WING HEAVY DUTY S/N 01162 - 10429 DEC 1980 - MAY 1988 ITEM PART NO. QTY. DESCRIPTION 1 0656170100 1 BLADE CARRIER, WELDMENT 2 671042 1 BLADE PAN 3 0652010030 2 OFFSET FLAT BLADE, CCW 0652010030 3 OFFSET FLAT BLADE, HARD SURFACED, CCW 0652010030 2 OFFSET FLAT BLADE, CW 0652010030 3 OFFSET FLAT BLADE, HARD SURFACED, CW 4 0622010330 2 OFFSET FAN BLADE, CCW 0622010330 4 OFFSET FAN BLADE, HARD SURFACED, CCW 0652010330 2 OFFSET FAN BLADE, CW 0652010330 2 FAN, BLADE HARD SURFACED,
ページ16に含まれる内容の要旨
BLADE PAN ASSEMBLY - WING STANDARD S/N 00101 - 01162 OCT 1977 - DEC 1980 ITEM PART NO. QTY. DESCRIPTION 1 671041 1 CARRIER, BLADE (WELDMENT) 2 671042 1 BLADE PAN 3 701022R 2 BLADE, OFFSET, CCW 0656240000 2 BLADE, OFFSET, CW (HARD SURFACE) 0656240000 2 BLADE, OFFSET, CW 4 71103 2 BLADE, SUCTION, CCW 0656240000 2 BLADE, SUCTION, CW 71103 2 BLADE, SUCTION, HARD SURFACED, CCW 0656240000 2 BLADE, SUCTION, HARD SURFACED, CW 5 36107A2ALH 2 BOLT, SHOULDER L.H. THD. 6 5312316 2 WASHER, SPECIAL (HEAT TREA
ページ17に含まれる内容の要旨
CHAIN GUARD - CENTER & WING SECTION S/N 01497 - 10429 JUN 1982 - MAY 1988 ITEM PART NO. QTY. DESCRIPTION 0652100000 - CHAIN GUARDS, FRONT 1 0652100100 1 CTR SECT FRNT CHN GD ASSY 2 0652100200 1 FRNT CHN GD ASSY, WING * 3 0652100110 1 WLDMT, MOUNTING BRACKET 4 0652100201 1 GUARD MNTING BRKT * 5 0652100101 69 CHAIN 5/16 5-LINKS 0652100203 63 CHAIN 5/16, 6 LINK * 6 0652100202 1 ROD CHAIN * 7 0652100104 2 ROD CHAIN 8 0652100102 1 ROD CHAIN 9 0652100105 2 ROD CHAIN 10 7A81312 7 C/S1/2 X 1 1/2 NC 5 (W
ページ18に含まれる内容の要旨
CHAIN GUARD - REAR CENTER SECTION S/N 01497 - 10429 JUN 1982 - MAY 1988 ITEM PART NO. QTY. DESCRIPTION 0652110000 - CHAIN GUARDS, REAR * 0652110100 1 REAR CHN GD ASSY, CTR SECT 1 0652110101 1 MOUNTING BRACKET 2 0652100203 57 CHAIN 5/16, 6 LINK 3 0652110102 1 ROD,CHAIN GUARD 52 1/2 LG 4 00748823 4 HHCS 1/2-13UNC 1-1/2 PL5 00752680 2 HHCS 1/2-13UNC X 4LG PL5 5 15B800 6 WASHER 1/2 SAE ZP 6 00001800 6 LOCKNUT TLM 1/2 NC PLB 7 0652110103 2 ROD,CHAIN GUARD 11 1/2 LG ?8 652053 2 SPACER Note: These chai
ページ19に含まれる内容の要旨
CHAIN GUARD - REAR WING SECTION S/N 01497 - 10429 JUN 1982 - MAY 1988 ITEM PART NO. QTY. DESCRIPTION 1 0652110300 1 LEFT REAR WING CHN GD 0652110200 1 RT REAR CHN GD ASSY 2 0652110210 1 MOUNTING BRKT, RIGHT 0652110310 2 MOUNTING BRKT, LEFT 3 00751126 110 CHAIN 5/16 WLD 6 LINK 4 0652110201 2 ROD CHAIN 5 00013300 2 HEXB 1/2 NC 2 PL5 9 652053 8 SPACER 10 00752680 6 HHCS 1/2-13UNC X 4LG PL5 12 7A81336 2 C/S1/2 X 4-1/2 NC PL5 Complete Rear Chain Guard Assembly to include center, left and right wing.
ページ20に含まれる内容の要旨
CYLINDER ASSEMBLY - CENTER AXLE S/N 00101 - 01377 OCT 1977 - JAN 1982 ITEM PART NO. QTY. DESCRIPTION 1 65113B1 1 CYLINDER 00759946 1 CYLINDER 3 X 8 W/1-1/4 ROD 00755234 1 CONTROL SPACER KIT 2 651302 1 HOSE #6 - 8 MP - 8 MP 180 LG 3 94514 1 ADAPTER, HYD, ELBOW SWIVEL 4 691354 1 CLEVIS 1 1/4-12 NF THD 65113A3 1 CLEVIS 1/16-12 NF THD 7 65113B6 1 COLLAR 651136 1 COLLAR 9 65113B8 1 HEAD 1 1/4 ROD 3 BR 65113A8 1 HEAD 1 1/16 ROD 3 BR 10 65113A9 1 ROD 1 1/4 651139 1 ROD, 1-1/16 DIA.,3/4NF THDS. 11 65113
