ページ1に含まれる内容の要旨
Users Guide
Cheetah 10K.7 SCSI
ST3300007LW/LC
ST3146707LW/LC
ST373207LW/LC
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
Users Guide Cheetah 10K.7 SCSI ST3300007LW/LC ST3146707LW/LC ST373207LW/LC
ページ4に含まれる内容の要旨
©2003-2005, Seagate Technology LLC All rights reserved Publication number: 100260915, Rev. D July 2005 Seagate and Seagate Technology are registered trademarks of Seagate Technology LLC. Cheetah, SeaTools, SeaFONE, SeaBOARD, SeaTDD, and the Wave logo are either regis- tered trademarks or trademarks of Seagate Technology LLC. Other product names are regis- tered trademarks or trademarks of their owners. Seagate reserves the right to change, without notice, product offerings or specifications. No
ページ5に含まれる内容の要旨
Revision status summary sheet Revision Date Sheets Affected Rev. A 03/17/04 1/1, v-viii, 1-83. Rev. B 09/22/04 Pages 9, 12, 1, 18, 25, 26, 28-34, 37, 43, 44, 58, and 87-90 Rev. C 05/05/05 Pages 11, 17, 27, 56, 60, 61, and 62. Rev. D 07/21/05 Pages 4 and 12.
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
Contents 1.0 Scope. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2.0 Applicable standards and reference documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1 Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2.1.1 Electromagnetic compatibility. . . . . . . . . . . . . . . . . . . .
ページ8に含まれる内容の要旨
6.4.1 Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 6.4.2 Relative humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 6.4.3 Effective altitude (sea level) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 6.4.4 Shock and vibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 6.4.5 Air c
ページ9に含まれる内容の要旨
List of Figures Figure 1. Cheetah 10K.7 SCSI family drive (ST3300007LC shown) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Figure 2. Typical ST3300007 drive +12 V current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Figure 3. Typical ST3300007 drive +5 V current profile. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 Figure 4. Typical ST3146707 drive +12 V current profile . . . . . . . . . . . . . . . . . . . . . . .
ページ10に含まれる内容の要旨
viii Cheetah 10K.7 SCSI Product Manual, Rev. D
ページ11に含まれる内容の要旨
1.0 Scope ® ® This manual describes Seagate Technology LLC, Cheetah 10K.7 SCSI disc drives. Cheetah 10K.7 SCSI drives support the small computer system interface (SCSI) as described in the ANSI SCSI SPI-3 interface specifications to the extent described in this manual. The SCSI Interface Product Manual (part number 75789509) describes general SCSI interface characteristics of this and other families of Seagate drives. From this point on in this product manual the reference to Cheetah 10K.7 SCSI
ページ12に含まれる内容の要旨
2 Cheetah 10K.7 SCSI Product Manual, Rev. D
ページ13に含まれる内容の要旨
2.0 Applicable standards and reference documentation The drive has been developed as a system peripheral to the highest standards of design and construction. The drive depends upon its host equipment to provide adequate power and environment in order to achieve opti- mum performance and compliance with applicable industry and governmental regulations. Special attention must be given in the areas of safety, power distribution, shielding, audible noise control, and temperature regu- lation. In par
ページ14に含まれる内容の要旨
2.2 Electromagnetic compliance Seagate uses an independent laboratory to confirm compliance to the directives/standard(s) for CE Marking and C-Tick Marking. The drive was tested in a representative system for typical applications. The selected sys- tem represents the most popular characteristics for test platforms. The system configurations include: Typical current use microprocessor 3.5-inch floppy disc drive Keyboard Monitor/display Printer External modem Mouse Although the test s
ページ15に含まれる内容の要旨
2.4 Reference documents Cheetah 10K.7 SCSI Installation Guide Seagate P/N 100260917 Safety and Regulatory Agency Specifications Seagate P/N 75789512 SCSI Interface Product Manual Seagate P/N 75789509 Applicable ANSI small computer system interface (SCSI) document numbers: T10/1143D Enhanced SCSI Parallel Interface (EPI) T10/1416D Primary Commands-2 (SPC-3) T10/1417D SCSI Block Commands (SBC-2) T10/1157D SCSI Architectural Model-2 (SAM-2) T10/1302D SPI-3 (SCSI Parallel Interface version 3) T10/13
ページ16に含まれる内容の要旨
6 Cheetah 10K.7 SCSI Product Manual, Rev. D
ページ17に含まれる内容の要旨
3.0 General description Cheetah 10K.7 SCSI drives combine giant magnetoresistive (GMR) heads, partial response/maximum likeli- hood (PRML) read channel electronics, embedded servo technology, and a wide Ultra320 SCSI interface to provide high performance, high ] data storage for a variety of systems including engineering workstations, net- work servers, mainframes, and supercomputers. Ultra320 SCSI uses negotiated transfer rates. These transfer rates will occur only if your host adapter supports
ページ18に含まれる内容の要旨
Cheetah 10K.7 SCSI drives use a dedicated landing zone at the innermost radius of the media to eliminate the possibility of destroying or degrading data by landing in the data zone. The drive automatically goes to the landing zone when power is removed. An automatic shipping lock prevents potential damage to the heads and discs that results from movement dur- ing shipping and handling. The shipping lock automatically disengages when power is applied to the drive and the head load process begins.
ページ19に含まれる内容の要旨
3.3 Performance Supports industry standard Ultra320 SCSI interface Programmable multi-segmentable cache buffer (see Section 4.5) 10,000 RPM spindle. Average latency = (3.00) ms Command queuing of up to 64 commands Background processing of queue Supports start and stop commands (spindle stops spinning) 3.4 Reliability Annualized Failure Rate (AFR) of 0.62% LSI circuitry Balanced low mass rotary voice coil actuator Incorporates industry-standard Self-Monitoring, Analysis and Re
ページ20に含まれる内容の要旨
3.5.1 Programmable drive capacity Using the Mode Select command, the drive can change its capacity to something less than maximum. See the Mode Select Parameter List table in the SCSI Interface Product Manual. Refer to the Parameter list block descriptor number of blocks field. A value of zero in the number of blocks field indicates that the drive shall not change the capacity it is currently formatted to have. A number in the number of blocks field that is less than the maximum number of LBAs c
