ページ1に含まれる内容の要旨
016784 - DG7160 - 24/05
Instructions for use
ページ2に含まれる内容の要旨
ページ3に含まれる内容の要旨
GB 1 • UNDERSTANDING YOUR STEAM GENERATOR 3 2 1 5 8 9 10 4 6 7 11 12 13 14 15 16 1. Dual function button: “burst of freshness” 8. Flap to cord storage compartment or “precision steam jet“ 9. Iron rest plate 2. Function selection slide: “burst of freshness” 10. Boiler screw cap or “precision steam jet“ 11. Connection cord to the boiler unit / 3. Diffusion nozzle: “burst of freshness” water tank or “precision steam jet“ 12. Base unit power cord 4. Housing drawer for the removable “burst of 13. P
ページ4に含まれる内容の要旨
GB 2 • PREPARING YOUR STEAM GENERATOR Fill the boiler : 1. Place your steam generator on a stable, horizontal heat-resistant surface. 2. Ensure that your appliance is disconnected and cold. 3. Unscrew the boiler screw cap. 4. Using a water jug, fill with one litre of water. 5. Fill the boiler, taking care that the water does not spill over (1). If this occurs, remove the excess water. 6. Replace the boiler screw cap, screwing on tightly. (1) The water to use in your steam generator : Your stea
ページ5に含まれる内容の要旨
N I M s c i t e GB 4 • USING YOUR STEAM GENERATOR 1. Open the flap to the cord storage compartment by undoing the catch. 2. Completely remove the cords from the storage compartment and slot them into the notches on either side of the flap (6). 3. Close the door. 4. Connect your steam generator to a socket with an earth connection. 5. Press on the illuminated on/off switch. (6) The steam indicator lights up while the boiler is heating up. When the indic
ページ6に含まれる内容の要旨
N I M s c i t e h t n y s N I M s l c o i t o e w h - t k n l y i s s n e s l n o c i i l o t - e w n GB SETTING THE TEMPERATURE CONTROL AND STEAM OUTPUT CONTROL DIAL ACCORDING TO THE TYPE OF FABRIC TO BE IRONED : Setting temperature Setting steam output Type of fabric control control dial • Synthetics (Low temperature) •• Silk / Wool (Medium temperature) ••• Cott
ページ7に含まれる内容の要旨
GB 6 • “PRECISION STEAM JET” OR “BURST OF FRESHNESS” FUNCTIONS Your steam generator has a dual function: • “Burst of freshness”; or • “Precision steam jet” . These 2 functions may be used intermittently, and in alternation, according to your ironing needs: • “Burst of freshness”: for long-lasting freshness; or • “Precision steam jet”: precision ironing for hard-to-reach areas. 7 • SELECTION OF THE “PRECISION STEAM JET” OR “BURST OF FRESHNESS” FUNCTION A slide positioned on the front of the iron
ページ8に含まれる内容の要旨
GB 8 • “BURST OF FRESHNESS” FUNCTION Move the slide to the downward position: “FRESH ON” (14). Press the button located on the handle of the iron (15). Your laundry will be sprayed with a jet of “freshness” steam. (14) (15) REPLACING THE CARTRIDGE: 1. Open the cartridge housing drawer by pulling it out horizontally (16). 2. Remove the used cartridge (17). 3. Remove the closing stopper from the new cartridge (18). 4. Insert the cartridge in its housing, pressing down firmly (an audible “click
ページ9に含まれる内容の要旨
GB 9 • “PRECISION STEAM JET” FUNCTION: Move the slide to the upward position: “FRESH OFF” (steam jet without an added “burst of freshness”) (21). The “precision steam jet” function allows you to: - Iron the most hard-to-reach areas (such as button holes, shirt cuffs and collars, darts in trousers, the inside of jacket and coat sleeves); - Soften the fibres before ironing, when the fabric is (22) very creased. Use: - With the iron on the ironing board, press the “Precision Steam Jet” button
ページ10に含まれる内容の要旨
GB 12 • MAINTAINING YOUR STEAM GENERATOR • Before cleaning, ensure that the appliance is unplugged and that the soleplate and the iron rest have cooled down. • Do not use any cleaning or descaling products for cleaning the soleplate or the base-unit. • Never hold the iron or the base unit under the tap. • Do not place the iron on a metal rest as this could damage it. Place it on the iron rest on the base unit : it has non-slip pads and has been designed to with- stand high temperatures. The iro
ページ11に含まれる内容の要旨
GB • This appliance is not intended to be used by children or without supervision by persons whose physical, sensory or mental aptitude to use it in complete safety is impaired. Children must be supervised to ensure that they do not play with the appliance. • The appliance must be used and placed on a flat, stable, heat-resistant surface. • When you place the iron on the iron rest, make sure that the surface on which you place it is stable. • Always plug your steam generator into : - An electri
ページ12に含まれる内容の要旨
GB 16. IS THERE A PROBLEM ? PROBLEMS POSSIBLE CAUSES SOLUTIONS • Water runs through the • The boiler is too full. • Do not fill the boiler right up to the top. holes in the soleplate. • Your thermostat is not working : • Contact an Approved Service Centre. the temperature is always too low. • You are using steam before the iron •Wait for the iron temperature control is hot enough. light to go out before ironing. • The water has condensed in th
