ページ1に含まれる内容の要旨
1
Quick Start Guide
2
User Manual
MCD 700
MCD 702
Quick start guide
What’s in the Box?
You should find these items upon opening the box.
Composite Video Cable FM and AM antenna Remote Control
Quick Start Guide Control Cable
User Manual
MCD700 QUG_Eng-37 1 2005.7.7, 14:15
ページ2に含まれる内容の要旨
1 Connect the speakers to the SPEAKERS (8ohm) terminals with two speaker cables. Right speaker to "R" and left speaker to "L", red wire to "+" and silver wire to "–". 2 Connect the supplied AM antenna and FM antenna to the respective terminals. Adjust the position of the antenna for optimal reception. 3 Connect the serial port marked CONTROL CABLE at the rear of the DVD player to the same port at the rear of the power amplifier with the supplied control cable. 4 Connect the VIDEO OUTPUT jack at
ページ3に含まれる内容の要旨
Setting up the TV 1 Press STANDBY ONB on the front panel of the DVD player or B on the remote to switch the DVD system on and then select the disc source. MCD700 DVD/RECEIVER/POWER AMPLIFIER STANDBY-ON STANDBY-ON IR SENSOR 2 Switch on the TV set and set to the correct video-in channel until the blue Philips DVD background screen appears on the TV. Tip See your TV manual for more details. Setting language preferences 1 Press SYSTEM on the remote to enter the system menu. Press 1 2 on the remote t
ページ4に含まれる内容の要旨
Loading a disc 1 Select the disc source, then press OPEN•CLOSE at the top of the DVD player or 0 on the remote. Load in a DVD disc with the label side facing up. 2 3 A disc menu pops up. Playback 1 Use 1 2 3 4 and OK or Numeric Keypad (0-9) on the remote to select a playback feature or item. Tip Refer to the User Manual for playback of other types of discs. 2 Press PRESET/ÉÅ (orÉÅ on the remote) to start playback. Types of Discs used on this DVD System Type Record Playback Edit DVD+RW DVD VIDEO
