ページ1に含まれる内容の要旨
WT. STACK SHROUD FOR GS6/GS8
WARNING:
Read and follow all directions
for each step to insure proper
assembly of this product.
USER’S GUIDE
CLASS H 1
Version: GS6-SHR-101
PART #7309601
Revision: 07/15/02
REV . A
ページ2に含まれる内容の要旨
TABLE OF CONTENTS Safety Statement.............2 Assembly Instructions.....4-5 General Notes..................3 General Maintenance......6 Tools Required................3 Warranty Statement........7 Parts List.........................4 Product Services............8 Insert-Registration Card IMPORTANT SAFETY INFORMATION THERE IS A RISK ASSUMED BY INDIVIDUALS WHO USE THIS TYPE OF EQUIPMENT. TO MINIMIZE RISK FOLLOW THESE RULES! 1. Before using, read all the warnings and instructions 6. Never pin t
ページ3に含まれる内容の要旨
IMPORTANT NOTES Please note: * Thank you for purchasing the ParaBody WT. STACK SHROUD FOR GS6/GS8. Please read these instructions thoroughly and keep them for future reference. * This product must be assembled on a flat, level surface to assure its proper function. DO NOT securely tighten any frame connections until the entire frame has been assembled, unless otherwise stated. Tools Required for Assembly * 9/16” wrench * Ratchet with 9/16” sockets * 7/32” Allen wrench Bolt Length Rul
ページ4に含まれる内容の要旨
PARTS LIST KEY PART # DESCRIPTION QTY KEY PART # DESCRIPTION QTY 1 7157409 LEFT SHROUD 1 5 3202401 8 3/8 X 1” BUTTON HEAD BOLT 2 7157509 RIGHT SHROUD 1 6 3228501 3/8” BLACK SAE WASHER 8 3 7114909 TOP SHROUD BRACKET 1 7 3235210 3/8 X 2-1/2” BOLT 2 4 7115009 BOTTOM SHROUD BRACKET 1 8 3114702 2 3/8” LOCK NUT FIGURE 1 3/8 X 2-1/2” 7 BOOM BRACKET 3 8 4 STEP 1: • SECURELY assemble the TOP SHROUD BRACKET (3) to the BOOM BRACKET using two 3/8 X 2-1/2” BOLTS (7) and two 3/8” LOCK NUTS (8) as show
ページ5に含まれる内容の要旨
FIGURE 2 3/8 X 1” 5 BUTTON HEAD 6 2 1 STEP 2: • SECURELY assemble the LEFT SHROUD (1) and RIGHT SHROUD (2) to the TOP (3) and BOTTOM (4) SHROUD BRACKETS using eight 3/8 X 1” BUTTON HEAD BOLTS (5) and eight 3/8” BLACK SAE WASHERS (6) as shown in FIGURE 2. (NOTE: Assemble LEFT SHROUD (1) by inserting top of shroud first, then lift up and swing the bottom of shroud into place.) • If the GS8 SECOND STACK OPTION was purchased, repeat STEPS 1 & 2 to assemble the SHROUDS (1 & 2) to the S
ページ6に含まれる内容の要旨
MAINTENANCE Please note: * We recommend cleaning your product (pads and frame) on a regular basis, using warm soapy water. Touch-up paint can be purchased from your ParaBody customer service representative at (800) 328-9714. * Inspect equipment daily. Tighten all loose connections are replace worn parts immediately. Failure to do so may result in serious injury * PLEASE RECORD THE INFORMATION REQUESTED BELOW. IN THE EVENT YOU MAY NEED SERVICE YOU WILL BE ASKED FOR THIS INFORMATION
ページ7に含まれる内容の要旨
LIMITED WARRANTY ParaBody extends the following LIMITED WARRANTY to the original owner of the ParaBody products. The Warranty terms apply to IN HOME USE ONLY. 1. LIMITED WARRANTY ON FRAME AND WELDS. If the frame of the ParaBody product or a weld should crack or break, it will be repaired or replaced by ParaBody. Terms: Lifetime – for so long as the Customer owns the ParaBody product. 2. LIMITED WARRANTY ON PARTS. If the following parts are defective in material or workmanship, ParaBody will
ページ8に含まれる内容の要旨
LIFE FITNESS 14150 Sunfish Lake Blvd. Ramsey Minnesota, 55303 U.S.A. Tel: 763.323.4500 Fax: 763.323.4797 800.328.9714 (Toll-free within the U.S. and Canada) www.parabody.com INTERNATIONAL OFFICES Life FitnessAtlantic BV Life Fitness (UK) Ltd. Atlantic Headquarters Queen Adelaide Bijdorpplein 25-31 Ely, Cambs CB7 4UB 2992 LB Barendrecht United Kingdom The Netherlands Phone CSS: (01353) 665507 Phone: (180) 646 666 Fax CSS: (01353) 666719 Fax: (180) 646 703 Life Fitness EUROPE GmbH Lif
