ページ1に含まれる内容の要旨
CR9926
CD Clock Radio
Please read this manual before use
ROBERTS
Sound for Generations
ページ2に含まれる内容の要旨
Important Information......................................................... 1 General ............................................................................ 16 Controls...........................................................................2-4 Mains Supply ................................................................... 16 Display ............................................................................... 5 Specification ........................................................
ページ3に含まれる内容の要旨
Controls (Front) 2 3 1 4 1. FM stereo indicator 2. CD/Clock display 3. LED dial pointer 4. Tuning control If you need any further advice, please call our Technical Helpline on :- 2 020 8758 0338 (Mon-Fri)
ページ4に含まれる内容の要旨
Controls (Top) 12 11 13 10 14 9 8 15 5. Time button 12. F. Fwd button 6. Weekend cancel button 16 13. CD Open/Close button 7 7. On/Off button 14. Stop button 6 17 8. Sleep button 15. Volume up button 9. Alarm 1 button 16. Volume down button 5 18 10. Alarm 2 button 17. Play/pause button 11. F.Rev button 18. Mode button 19. Snooze button 19 3
ページ5に含まれる内容の要旨
Controls (Right side) (Left side) 21 22 20 23 20. Waveband switch 22. Reset button 21. Function switch 23. Headphone socket If you need any further advice, please call our Technical Helpline on :- 4 020 8758 0338 (Mon-Fri)
ページ6に含まれる内容の要旨
Display def g h i c b j a k l a. Day of week indicators g. Repeat indicator b. Pause indicator h. Sleep indicator c. Play indicator i. Alarm 1 indicator d. Random indicator j. Alarm 2 indicator e. Program indicator k. Weekend cancel indicator f. CD track and time indicators l. PM indicator 5
ページ7に含まれる内容の要旨
Switching on and setting the time 1. Place the unit on a flat surface. Plug the mains lead into a wall socket and switch on. 2. Press and hold down the Time button. 3. Whilst holding down the Time button set the correct time using the F.Fwd and F.Rev buttons. The clock will start counting as soon as buttons are released. The clock uses a 12 hour display with a PM indicator. Ensure that the correct 12 hour cycle is selected. 4. To set day of week press and hold down the Snooze button. 5. Whilst
ページ8に含まれる内容の要旨
Listening to the Radio 1. Switch on your CD clock radio by pressing the On/Off button. 2. Set the Function switch to the Radio position. The Led dial pointer will light up. 3. Set the Waveband switch to the required waveband. 4. Tune in to the desired station by rotating the Tuning control. The station frequency is indicated in the dial scale. 5. Adjust volume using the Volume Up and Down buttons. 6. The Wire aerial located on the rear of your CD clock radio is for FM reception. The wire shoul
ページ9に含まれる内容の要旨
Compact discs Use only Digital Audio CDs which have the symbol. Never write on a CD or attach any sticker to the CD. Always hold the CD at the edge and store it in its box after use with the label facing up. To remove dust and dirt, breathe on the CD and wipe it with a soft, lint- free cloth in a straight line from the centre towards the edge. Cleaning agents may damage the CD Do not expose the CD to rain, moisture, sand, or to excessive heat. (e.g. from heating equipment or in motor cars parke
ページ10に含まれる内容の要旨
Playing a CD 1. Press the Play/Pause button to start playback. The display will show the Play indicator, track number and elapsed time. 2. Set the Volume control to the required setting. 3. To pause playback press the Play/Pause button. The Pause indicator will appear and elapsed time will flash in the display. To resume playback press the Play/Pause button again. The display will show the Play indicator and elapsed time. 5. To stop playback, press the Stop button. The display will show total
ページ11に含まれる内容の要旨
Selecting a track 1. Whilst the CD is playing, press and release either the F.Fwd or F.Rev to change to the desired track. 2. You can also change tracks when the player is in stop mode. Change to the desired track using the F.Fwd or F.Rev buttons. Press the Play button to play selected track Search function 1. Whilst the CD is playing, press and hold down either the F.Fwd or F.Rev buttons. Release the button when the desired part of the track is reached. Playback modes The Mode button allows yo
ページ12に含まれる内容の要旨
3. Press the Mode button again to play all tracks on the CD in random order. The Random indicator will appear in the display. 4. Press the Mode button again to return to normal play. The Random indicator will be removed from display. 5. Pressing the Stop button will stop the CD and return the CD player to normal play mode. Programmed play By programming the player you can play up to 20 tracks in any desired order. 1. Whilst the CD is in STOP, press the Mode button. The Programme indicator will s
ページ13に含まれる内容の要旨
Replacing previously programmed tracks 1. Whilst the CD is in STOP, repeatedly press the Mode button until the display shows the program step you wish to replace. 2. Select the required track using the F.Fwd or F.Rev buttons. 3. Press the Mode button to store the change. Erasing a programme 1. Whilst the CD is in STOP, press the Mode button. The Programme indicator will flash. 2. Press the Stop button to erase the programme. Programmes are also erased by:- Opening the CD door, moving the Functi
ページ14に含まれる内容の要旨
Wake to CD 1. Slide the Function switch to CD and insert a CD into compartment. 2. Repeatedly press and release the Alarm 1 or Alarm 2 buttons until the or indicators appear in the display. 3. Your CD clock radio will switch on and the CD will play at the alarm time set. The CD will play for a maximum of 90 minutes. Whilst the alarm is active the or indicators will flash in the display. 4. To switch off CD alarm until the next day press the On/Off button. Wake to radio 1. Slide the Functio
ページ15に含まれる内容の要旨
Wake to buzzer 1. Repeatedly press and release the Alarm 1 or Alarm 2 buttons until the or indicators appear in the display. 2. Your CD clock radio will switch on and the Buzzer will sound for a maximum of 90 minutes. Whilst the alarm is active the or indicators will flash in the display. 3. To switch off Buzzer alarm until the next day press the On/Off button. Snooze control 1. The CD, Radio or Buzzer alarms can be silenced for 5 minutes by pressing the Snooze button. This sequence ca
ページ16に含まれる内容の要旨
Sleep timer 1. CD or Radio can be set to switch off automatically after a preset time has elapsed. 2. Set the Function switch to the CD or Radio position. 3. Repeatedly press and release the Sleep button until the desired time is reached (maximum 90 minutes in 10 minute steps). The Sleep indicator will light up in the display. 4. The CD or radio will switch off after the sleep time has elapsed. 5. To cancel the sleep function before the preset time has expired, press the On/Off button. Headphon
ページ17に含まれる内容の要旨
General Do not allow this unit to be exposed to water or steam. It is recommended The wire coloured BLUE must be that the FM band be used wherever possible as better results in terms connected to the terminal marked N of quality and freedom from interference will usually be obtained than on or coloured BLACK. the MW or LW bands. The wire coloured BROWN must be connected to the terminal marked L Mains supply or coloured RED. The CR9926 will operate from a supply of AC 230 volts, 50Hz only. For
ページ18に含まれる内容の要旨
Specifications Circuit Features Power Requirements Mains AC 230 volts, 50Hz only Loudspeaker 2 x 77mm 8ohms Batteries Output Power 2 x 1.5 Watts into 8ohms Headphone Socket 3.5mm diameter Aerial System FM Telescopic aerial MW Built-in Ferrite aerial Frequency Coverage LW Built-in Ferrite aerial FM 87.5 - 108MHz MW 522 - 1620kHz LW 144 - 281kHz ROBERTS RADIO LIMITED PO BOX 130 MEXBOROUGH SOUTH YORKSHIRE S64 8YT The Company reserves the right to amend the specification without notice. 17
ページ19に含まれる内容の要旨
Guarantee This instrument is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below. Should any component or part fail during this guarantee period it will be repaired or replaced free of charge. The guarantee does not cover: 1. Damage resulting from incorrect use. 2. Consequential damage. 3. Receivers with removed or defaced serial numbers. Procedure: Any claim under thi
ページ20に含まれる内容の要旨
ROBERTS RADIO TECHNICAL SERVICES DEPARTMENT 97-99 Worton Road Isleworth Middlesex TW7 6EG Technical Helpline:- 020 8758 0338 (Mon-Fri) Issue 1
