ページ1に含まれる内容の要旨
Advanced Weather Station
INTRODUCTION
with Wireless Sensor Set TM
Thank you for selecting the Oregon Scientific Advanced Weather Station with
Wireless Sensor Set (WMR90A).
Model: WMR90A
The base station is compatible with other sensors. To purchase additional sensors,
USER MANUAL please contact your local retailer.
CONTENTS
Sensors with this logo are compatible with this unit.
Introduction ...................................................................
ページ2に含まれる内容の要旨
1 2 3 4 5 Temperature / Heat Index / Wind Chill Area OVERVIEW 1 2 3 4 5 6 7 8 9 2 1. Temperature trend 3 1 2. Wind Chill level - temperature is showing 4 5 3. Heat Index level - temperature is showing 4. HI / LO temperature, HI Heat Index and LO Wind Chill alarms are set 5. Selected area icon 1. + / - : Increase or decrease the values of the setting 6. Indoor / Outdoor channel temperature and humidity is displayed 2. MODE: Switch between the different display modes / settings 7. MAX / MIN te
ページ3に含まれる内容の要旨
Humidity / Dew Point Area GETTING STARTED SET UP REMOTE WIND SENSOR 1 2 The wind sensor can take 3 readings: • The wind speed and directions 3 • The outdoor temperature (Channel 1 only) 4 • The outdoor relative humidity (Channel 1 only) 5 The sensor is battery operated and is capable of transmitting data to the base station wirelessly within an approximate operating range of 100 meters (328 feet). 6 NOTE For best results, ensure that the wind direction indicator on the wind sensor 1. Dew poi
ページ4に含まれる内容の要旨
1 0 1 2 1 1 1 3 For continuous use, please install the AC adapter. The batteries are for back-up use 9 only. NOTE Please make sure the socket-outlet is installed near the equipment and is easily accessible. 7 SET UP REMOTE RAIN GAUGE The rain gauge collects rain and takes readings of the total rainfall over a period of time. The sensor can remotely transmit data to the base station. Install the base station batteries (4 x UM-3 / AA) matching the polarity + and -. Press The base station
ページ5に含まれる内容の要旨
NOTE Channel 1 is used for the outdoor temperature and humidity sensor in the CLOCK / CALENDAR remote wind sensor. Additional temperature and humidity sensors can use other To manually set the clock: channels. (You only need to set the clock and calendar if you have disabled the clock radio reception.) WEATHER FORECAST 1. Press SELECT to navigate to the Clock Area. will show next to the Area. The weather display in the top part of the screen shows the current weather and the 2. Press an
ページ6に含まれる内容の要旨
2. Press and hold ALARM to enter the alarm setting. To clear the memories and timestamp for the wind readings: 3. Press + or - to set the desired values. In the Wind Speed and Wind Direction Area, press and hold MIN/MAX to clear the readings. 4. Press ALARM to confirm the setting. To change the high gust wind speed alarm: To activate / deactivate the high / low temperature, heat index, wind chill, humidity and dew point alarms: 1. In the Wind Speed and Wind Direction Area, press and hold ALAR
ページ7に含まれる内容の要旨
TROUBLESHOOTING BAROMETER To change the barometer alarm: PROBLEM SYMPTOM REMEDY 1. In the UV / Barometer / Rainfall Area and Barometer reading display, press and hold ALARM to enter the Barometer alarm setting. Barometer Strange readings Set unit 2. Press + or - to set the desired values. Calendar Strange date / month Change language 3. Press ALARM to confirm the settings. Clock Cannot adjust clock Disable radio-controlled clock To activate / deactivate the barometer alarm: Cannot auto-synch
ページ8に含まれる内容の要旨
Memory Current, min and max FCC STATEMENT Alarm Hi / Lo This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) RADIO-CONTROLLED / ATOMIC CLOCK This device must accept any interference received, including interference that may cause undesired operation. Synchronization Auto or disabled Clock display HH:MM:SS WARNING Changes or modifications not expressly approved by the party responsi
