ページ1に含まれる内容の要旨
Weather Trends ..................................................... 7
Advanced Weather Station
Moon Phase .............................................................. 7
with Atomic Time
Backlight ................................................................... 7
Model: BAR208HG
Reset .......................................................................... 7
USER MANUAL
Precautions ............................................................... 7
Specifications ..........................
ページ2に含まれる内容の要旨
1. Remote sensor reception indicator OVERVIEW 2. Moon phase reading FRONT VIEW (FIG 1) 3. Weather forecast 4. Indoor temperature with temperature trend 5. Clock signal reception indicator 6. MODE: Change settings / display 7. / : Increase / decrease settings; activate / deactivate clock reception signal 8. Outdoor temperature with temperature trend 9. Outdoor humidity with humidity trend 10. Weather warning message 11. Indoor humidity with humidity trend 12. Clock with weekday 13. MEM: View
ページ3に含まれる内容の要旨
REMOTE SENSOR (FIG 3) BACK VIEW (FIG 2) 2 1 4 3 5 1. LED status indicator 2 2. Wall mount hole 1 3 3. Battery compartment 4. RESET hole 5. CHANNEL switch GETTING STARTED INSERT BATTERIES 1. Remove the battery compartment. 2. Insert the batteries, matching the polarities (see FIG 1. °C / °F: Select temperature unit 2). 2. EU / UK: Select the nearest radio signal 3. RESET: Reset unit to default settings 3. Press RESET after each battery change. 3 BAR208HG_M_EN_R3.indd 3 8/9/07 9:15:28 AM EN
ページ4に含まれる内容の要旨
LOCATION MEANING Clock / alarm and Main unit batteries low Indoor temperature area Outdoor temperature area Sensor batteries low REMOTE SENSOR The main unit can collect data from up to 3 sensors. To set up the sensor: 1. Open the battery compartment (see FIG 3). 2. Select a channel then press RESET. 3. Close the battery door. 1.5m(5ft) 4. Place the sensor within 30 m (98 ft) of the main unit using the table stand or wall mount. TIP Ideal
ページ5に含まれる内容の要旨
ICON DESCRIPTION reception is unsuccessful, place your unit next to a window, Main unit is searching for press and hold to force another signal search. sensor(s). Clock signal reception indicator: A channel has been found. STRONG SIGNAL WEAK SIGNAL NO SIGNAL The sensor cannot be found. TIP The transmission range may vary depending on many factors. You may need to experiment with various MANUALLY SET CLOCK locations to get the best results. To set the clock manually
ページ6に含まれる内容の要旨
WEATHER FORECAST Risk of foggy conditions This product forecasts the next 12 to 24 hours of Risk of icy conditions weather within a 30-50 km (19-31 mile) radius with a 75% accuracy. Sunny TEMPERATURE AND HUMIDITY To toggle temperature unit: Partially Cloudy Press °C / °F. Cloudy To auto-scan between sensors: Press and hold + MEM to display each sensor’s data Rainy for 3 seconds. To end press . Snowy To toggle between current, minimum and maximum records for the selected
ページ7に含まれる内容の要旨
WEATHER TRENDS PRECAUTIONS The temperature, humidity and pressure trend icons are • Do not subject the unit to excessive force, shock, based on recent sensor readings. dust, temperature or humidity. • Do not cover the ventilation holes with any items such RISE STEADY FALL as newspapers, curtains etc. • Do not immerse the unit in water. If you spill liquid over it, dry it immediately with a soft, lint-free cloth. • Do not clean the unit with abrasive or corrosive MOON PHASE materials.
ページ8に含まれる内容の要旨
NOTE The technical specifications for this product and ABOUT OREGON SCIENTIFIC the contents of the user manual are subject to change Visit our website (www.oregonscientific.com) to learn without notice. more about Oregon Scientific products. If you’re in the US and would like to contact our Customer Care SPECIFICATIONS department directly, please visit: www2.oregonscientific. com/service/support TYPE DESCRIPTION OR MAIN UNIT Call 1-800-853-8883. L x W x H 94 x 51 x 182.5 mm For internation
