ページ1に含まれる内容の要旨
is a registered trademark of OSRAM SYLVANIS Inc. used under licence.
VERTICAL CD CLOCK RADIO DUAL ALARM
OWNER'S MANUAL
MODEL NO. SCR4947
PLEASE READ BEFORE OPERATING THIS EQUIPEMNT
ページ2に含まれる内容の要旨
Warnings and Precautions TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. This symbol, located on back or bottom of the unit, is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol, located on back or bottom of the unit, is intended to alert the user to the presence of important operating and maintenance (ser
ページ3に含まれる内容の要旨
Features 6 22 2 4 3 5 8 7 19 17 16 18 1 14 15 13 12 11 9 10 21 20 24 23 27 26 25 3
ページ4に含まれる内容の要旨
Features Defined 1 POWER Press the POWER button to turn the unit OFF and ON. 2 AM / FM Slide the AM/FM switch to AM or FM band. 3 TUNING Rotate TUNING knob to increase/decrease the radio frequency. 4 CD / RADIO Slide the CD / RADIO switch to CD or RADIO playing. 5 VOLUME Rotate VOLUME knob to increase/decrease the volume sound. 6 CD DOOR OPEN Press to open the CD door. 7 CD DOOR Using CD DOOR OPEN button to open the CD door. 8 LCD Display View the Time, AM/FM indicator, and radio frequency throu
ページ5に含まれる内容の要旨
Installation CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. AC Outlet Unravel the AC cord and connect it to a conveniently located AC outlet having 120V and 60Hz only. The Clock Display will illuminate and AC Plug "12:00" will appear in the window. NOTE: If the AC plug does not fit into a non polarized outlet, do not file or cut the wide blade. If the AC cord is disconnected or if there is a power failure, this electronic clock is designed to con
ページ6に含まれる内容の要旨
Operations TO SET OR RESET THE ACTUAL TIME 1. Press the CLK SET button once; the hour will blink. 2. Press the SKIP/FWD button or SKIP/REV to set the present hour . 3. Press the CLK SET button again; the minutes will blink. 4. Press the SKIP/FWD button or SKIP/REV to set the present minute. 5. Press the CLK SET button to confirm the time. TO SET OR RESET THE ALARM TIME 1. Press the desired ALARM SET button (AL1 or AL2). ; the hour will blink. 2. Press the SKIP/FWD button or SKIP/REV to set the
ページ7に含まれる内容の要旨
Operations TO SET THE ALARM TO WAKE TO BUZZER 1. Set the alarm time as previously instructed. Slide the MUSIC/BUZZER switch to BUZZER position. 2. After switch to the BUZZER position and make sure the power is off. When the actual time matches the selected preset alarm time(s), the unit automatically turns on. TO SHUT THE ALARM OFF 1. To shut the alarm off, press the POWER button once and the alarm time will be reset for the next day. 2. Press ALARM SET button (AL1 or AL2) to turn off the
ページ8に含まれる内容の要旨
Operations TO LISTEN TO THE RADIO 1. Press the POWER Button to turn the unit on; the POWER indicator will light. 2. Slide the RADIO/CD switch to the RADIO position on the left side of the unit.. 3. Tune a station by turning the TUNING control on the right side of the unit. Adjust the VOLUME control on the left side of the unit as desired. FM: Extend the FM wire antenna for best reception. AM: Turn the unit for better AM reception. TO INSERT A CD 1. Open the CD compartment door by pressi
ページ9に含まれる内容の要旨
Operations TO PLAY A CD 1. Insert a CD. 2. Press the POWER button to turn the unit on; 3. The LCD display will light. Slide the RADIO/CD switch to the CD position. (The total number of track will appear in the display). 4. Press the PLAY/PAUSE button to start playback. 5. TO PAUSE PLAYBACK, press the PLAY/PAUSE button again; the display will briefly blink. Press again to resume playback. 6. To skip forward or backward through the tracks on the disc, press the SKIP button. To search forwa
ページ10に含まれる内容の要旨
Operations TO PLAY A CD RANDOMLY 1. Press the RAND button. 2. RDM indicator will light solid. 3. All CD Track will play randomly, press the RAND button again to cancel RANDOM Mode. TO PROGRAM THE MEMORY (UP TO 20 TRACKS) 1. Press the POWER button to turn the unit on; the POWER indicator will light. Slide the RADIO/CD switch to the CD position. 2. Press the PROG. button once; "01 01" will appear in the display and the PROG. Indicator will blink. 3. Within 7 seconds, select the first track
ページ11に含まれる内容の要旨
Care and Maintenance Caring for Compact Discs • Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the disc. • Do not attach adhesive tape, stickers, etc. tothe disc label. • Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to clean the disc. If necessary, use a CD cleaning kit.If a disc skips or gets stuck on a section of the disc, it is probably dir
ページ12に含まれる内容の要旨
Troubleshooting Guide If you experience a problem with this unit, check the chart below: SYMPTOM CAUSE SOLUTION Unit will not AC cord not Check AC cord turn on. connected. connection. Disc will not play . CD compartment Close CD compartment not closed. door. Disc inserted Reinsert disc correctly. incorrectly . Dirty or defective CD. Try another disc. Moisture Wipe disc with soft cloth. condensation on disc. No sound. VOLUME control Increase volume. set to minimum. Defective disc. Try another di
ページ13に含まれる内容の要旨
Specifications Power Requirement Input: AC~120V/60Hz Battery Back-up for Clock: DC 9V Battery Frequency Range Radio Receiving: AM 530 - 1710 kHz FM 87.5 - 108 mHz Power Consumption 11 Watts 13
