ページ1に含まれる内容の要旨
MFR-1100 SERIES
Single Output Soldering & Rework System
MFR-2200 SERIES
Dual Simultaneous Output
Soldering & Rework System
MFR-1100 & MFR-2200 Series User Guide
MFR-1100 & MFR-2200
MFR-1100 & MFR-2200
MFR-1100 & MFR-2200
MFR-1100 & MFR-2200
Copyright © OK International, Inc.
7000-2570_1
1
ページ2に含まれる内容の要旨
WARNING ! With power applied, the tip temperature can be > 300°C. Failure to observe the following precautions may lead to injury to users or damage the equipment: • Do not touch any metallic parts of the hand-piece • Do not use near flammable items • Do not use unit for any function other than described in this manual • Use only genuine MFR replacement parts • Use in a well ventilated area • Do not use the equipment with wet hands • Connect only to properly grounded out
ページ3に含まれる内容の要旨
Contents and Identification of Features MFR-PS1100 MFR- PS2200 AC Power Switch AC Power LED Channel LED Channel Switch Output Connector WS1 for soldering handpieces MFR-H2- MFR-H1- MFR-H4- or ST SC TW MFR-WSPT for tweezers handpiece See inserts for relevant hand-piece operating instructions Initial Setup & Operation. 1. Connect hand-piece(s) to power unit output connector(s). 2. Insert your selected tip or cartridge into the hand-piece. Push the tip or cartridge all t
ページ4に含まれる内容の要旨
Auto-Sleep and Auto Off Functions To prolong tip life, MFR systems with a soldering hand-piece (MFR-H1-SC, MFR-H2-ST) include an “Auto-Sleep Workstand” (WS1). When the hand-piece is placed into the workstand, the “Auto-Sleep Workstand” immediately reduces power to the hand-piece. All MFR systems have an “Auto Off” Function. The “Auto Off” Function will be engaged when the hand-piece has been idle in the sleep stand for a period of two hours. The channel LED indicator light will go
ページ5に含まれる内容の要旨
Accessories & Spares The following upgrade kits provide extra hand-pieces with workstands as a set MFR-UK1 Upgrade Kit: Solder cartridge hand-piece & WS1 workstand MFR-UK2 Upgrade Kit: Solder tip hand-piece & WS1 workstand MFR-UK4 Upgrade Kit: Tweezers hand-piece & MFR-WSPT workstand AC-CP2 Soldering cartridge / tip removal pad MFR-CA2 Coil Assembly for MFR-H2-ST handpiece MFR-PM70 Power meter, MFR, 0-70W scale Soldering and Rework Tips and Cartridges OKi offe
ページ6に含まれる内容の要旨
® SmartHeat & Calibration Each cartridge or tip is equipped with a self-regulating heater which ‘senses’ its own temperature and tightly maintains its pre-set idle temperature for the life of the heater-tip; ® all controlled by OK International’s proprietary SmartHeat Technology. The tip temperature is determined by the inherent metallurgical properties of the heater; no external adjustment or equipment is required. The power delivered to the tip automatically varies in direct response to
ページ7に含まれる内容の要旨
! 300°C • • • • MFR • • • • • • EOS - WEEE (2002/96/EC) OK International (www.okinternational.com) 7
ページ8に含まれる内容の要旨
MFR-PS2200 MFR-PS1100 LED LED MFR-H2-ST MFR-H1-SC MFR-H4-TW WS1 MFR-WSPT 1. 2. 3. 4. 5. 6. 7. LED 8. 9. 8
ページ9に含まれる内容の要旨
MFR-H1-SC MFR-H2-ST MFR (WS1) MFR LED 显 绿 将 LED MFR-PS1100 MFR-PS2200 LED • --- • --- • --- LED • --- / • --- • --- 10- 40°C 55°C 100- 240 VAC 50/60 Hz MFR-1100 90 MFR-2200
170
22°C 60 450--480 KHz 3 183cm (18/3) SJT (w x d x h) MFR-1100 90mm (3.5”) 297mm (8”) 142 mm (5.6) MFR-2200 122mm (4.8”) 200mm (8”) 152.5mm (6”) / cTUVus, CE <2mV <2 ± 1.1°C
ページ10に含まれる内容の要旨
MFR-UK4 MFR-WSPT AC-CP2 MFR-CA2 MFR-H2-ST MFR-PM70 MFR 0-70W OKi www.okinternational.com MFR-H2-ST SxV BGA CxV MFR-H1-SC SxP RxP MFR-H4-TW SMD TxP 10
ページ11に含まれる内容の要旨
® SmartHeat ‘ ’ ® OK International SmartHeat OK International OK International MFR OK International MFR-H2-ST (MFR-CA2) OK International 30 www.okinternational.com OK International (www.okinternational.com) 11
ページ12に含まれる内容の要旨
! 300°C • • • • MFR • • • • • ( ) • EOS - WEEE (2002/96/EC). OK International www.okinternational.com 12
ページ13に含まれる内容の要旨
MFR-PS2200 MFR-PS1100 LED LED MFR-H2-ST MFR-H1-SC MFR-H4-TW WS1 MFR-WSPT 1. 2. ( ) 3. 4. ( ) 5. ( ) 6. 7. LED 8. LED 9. 13
ページ14に含まれる内容の要旨
(MFR-H1-SC MFR-H2-ST) MFR (WS1) MFR LED 显 灯 LED MFR-PS1100 MFR-PS2200 LED • --- • --- • ------ 10 - 40°C 55°C 100- 240 VAC 50/60 Hz MFR-1100 90 .( ) LED MFR-2200 170 .( ) • --- / 22°C 60 • --- 450--480 KHz • ------ 3 183 (18/3) SJT ( ) w x d x h MFR-1100 90mm (3.5”) 297mm (8”) 142 mm (5.6) MFR-2200 122mm (4.8”) 200mm (8”) 152.5mm (6”) / cTUVus, CE <2mV <2 ± 1.1°C L=122cm (4
ページ15に含まれる内容の要旨
MFR-UK1 WS1 MFR-UK2 WS1 MFR-UK4 MFR-WSPT AC-CP2 MFR-CA2 MFR-H2-ST MFR-PM70 MFR 0-70W OKi www.okinternational.com MFR-H2-ST SxV BGA CxV MFR-H1-SC SxP RxP MFR-H4-TW SMD TxP 15
ページ16に含まれる内容の要旨
® SmartHeat ® OK International SmartHeat OK International OK International OK International MFR-H2-ST (MFR-CA2) OK International 30 www.okinternational.com www.okinternational.com 16
ページ17に含まれる内容の要旨
! 300°C • • • • MFR • • • • • • EOS (Electrical Overstress) - WEEE (2002/96/EC) OK OK (www.okinternational.com) 17
ページ18に含まれる内容の要旨
MFR-PS2200 MFR-PS1100 AC AC LED MFR-H2-ST MFR-H1-SC MFR-H4-TW Auto-Sleep Workstand 18
ページ19に含まれる内容の要旨
LED MFR-PS1100 MFR-PS2200 AC LED • • • • • • 90mm (3.5”)/297mm (8”)/142 mm (5.6) 19
ページ20に含まれる内容の要旨
“Clean-up” ® SmartHeat & Calibration OK 1 OK 20
