ページ1に含まれる内容の要旨
1
INSTALLER: THESE INSTRUCTIONS MUST BE CONVEYED TO AND REMAIN WITH THE HOMEOWNER.
CERTIFIED UNDER CANADIAN AND AMERICAN NATIONAL STANDARDS, CR97-003, CAN1-2.21-M85, IAS U.S. 4-96.
OUTDOOR GAS APPLIANCE
INSTALLATION AND OPERATION INSTRUCTIONS FOR
OUTDOOR GAS FIREPLACE
NATURAL GAS MODEL GSS36N
PROPANE GAS MODEL GSS36P
CERTIFIED FOR CANADA AND UNITED STATES USING ANSI / CSA METHODS
WARNING: If the information in these instructions is not followed exactly, a fire or
explosion may result causing
ページ2に含まれる内容の要旨
2 TABLE of CONTENTS PG 3-4 INTRODUCTION 9 OPERATION / MAINTENANCE Warranty Operating Instructions General Instructions Maintenance General Information Venturi Adjustment 5-6 INSTALLATION 10 REPLACEMENTS Gas Installation Ordering Replacement Parts Combustion and Ventilation Air Provisions Replacement Parts Clearance to Combustibles 11-12 TROUBLE SHOOTING GUIDE Framing Mantle Clearances Nailing Tab Installation 7-8 FINISHING Log Placement Curtain Mesh Hood Installation Logo Placement Louvre Instal
ページ3に含まれる内容の要旨
3 NAPOLEON products are manufactured under the strict Standard of the world recognized ISO 9001 : 2000 Quality Assurance Certificate. NAPOLEON products are designed with superior components and materials, assembled by trained craftsmen who take great pride in their work. The burner and valve assembly are leak and test-fired at a quality test station. Once assembled the complete appliance is thoughly inspected by a qualified technician before packaging to ensure that you, the customer; revieves t
ページ4に含まれる内容の要旨
ページ5に含まれる内容の要旨
ページ6に含まれる内容の要旨
6 When roughing in the fireplace, raise the fireplace to ac- FRAMING commodate for the thickness of the finished floor materi- It is best to frame your fireplace after it is positioned. Use als, i.e. tile, carpeting, hard wood, which if not planned for 2x4's and frame to local building codes. FIGURE 4-6. will interfere with the opening of the lower access door and the installation of many decorative flashing accesso- FIGURE 5 ries. Objects placed in front of the fireplace should be kept a minimu
ページ7に含まれる内容の要旨
7 FINISHING LOG PLACEMENT TM PHAZER logs are exclusive to Napoleon Fireplaces, provide a unique and realistic glowing effect that is different in every installation. Log colours may vary. During the initial use of the fire- place, the colours will become more uniform as colour pigments burn in during the heat activated curing proc- ess. FIGURE 11a-d #5 The top of the log should rest in the pocket on the back log. 4. Position the notch located on the end of the center log (#5) against the middle
ページ8に含まれる内容の要旨
8 HOOD LOGO PLACEMENT Remove the FIGURE 12 backing of the logo supplied and place on the HOOD screen cover, as indicated. CURTAIN MESH FIGURE 14 LOUVRE INSTALLATION UPPER LOUVRES: In- The curtain mesh must be kept fully closed during opera- FIGURE 15a-c sert the upper louvres HOOD tion to help prevent accidental burns from occurring. into the slots on both BRACKET brackets. Press the top FIGURE 13 flange of the hood into SLOT the four clips located along the top of the unit LOUVRE A as shown. L
ページ9に含まれる内容の要旨
9 OPERATION / MAINTENANCE After extended periods of non-operation such as fol- If heater keeps shutting off, have it serviced. Keep lowing a vacation or a warm weather season, the fire- burner and control compartment clean. place may emit a slight odour for a few hours. This is When lit for the first time, the fireplace will emit a slight caused by dust particles burning off. odour for a few hours. This is a normal temporary con- dition caused by the curing of the logs and the "burn- in" of inte
ページ10に含まれる内容の要旨
10 REPLACEMENTS Contact your dealer for questions concerning prices and When ordering replacement parts always give the follow- policies on replacement parts. Normally all parts can be ing information: ordered through your Napoleon dealer or distributor. 1. MODEL & SERIAL NUMBER OF FIREPLACE 2. INSTALLATION DATE OF FIREPLACE 3. PART NUMBER FOR WARRANTY REPLACEMENT PARTS, A PHOTOCOPY OF THE 4. DESCRIPTION OF PART ORIGINAL INVOICE WILL BE REQUIRED TO HONOUR THE CLAIM. 5. FINISH * IDENTIFIES I
ページ11に含まれる内容の要旨
11 TROUBLE SHOOTING GUIDE SYMPTOM PROBLEM TEST SOLUTION Main burner goes Pilot flame is not large - turn up pilot flame. out; pilot stays on. enough or not engulfing the - replace pilot assembly. thermopile Thermopile shorting - clean thermopile connection to the valve. Reconnect. - replace thermopile / valve. Remote wall switch wire is - shorten wire to correct length or wire gauge. too long; too much resist- ance in the system. Faulty thermostat or switch. - replace. Pilot goes out when Sys
ページ12に含まれる内容の要旨
12 SYMPTOM PROBLEM TEST SOLUTION Pilot goes out Gas piping is undersized. - turn on all gas appliances and see if pilot flame flutters, dimin- while standing; ishes or extinguishes, especially when main burner ignites. Monitor Main burner is in appliance supply working pressure. 'OFF' position. - check if supply piping size is to code. Correct all undersized piping. High Wind. - unit has been exposed to a high wind condition. A “sheltered” area is recommended for the installation location. - c
