ページ1に含まれる内容の要旨
RCR-10
GB
Revision 2
ページ2に含まれる内容の要旨
“Made for iPod” means that an electronic accessory has been designed to connect specifically to iPod respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod may affect wireless performance. iPod, iPod classic, iPod nano, iPod shuffle, and iPod touch are trademarks of Apple Inc., registered in the
ページ3に含まれる内容の要旨
Table of contents GB Important safety instructions ............................................... 3-4 Introduction .............................................................................. 5 Controls ............................................................................... 6-11 Remote control functions ..................................................... 12 Using the radio for the first time ........................................... 13 Operating your radio – AM/FM ................
ページ4に含まれる内容の要旨
Important Safety Instructions 9. Power sources; The radio should be operated only from the type of 1. Read and understand all safety and operating instructions before the power source indicated on the marking label. If you are not sure of radio is operated. the type of power supply to your home, consult your radio dealer or power company. 2. Retain instruction: The safety and operating instructions should be retained for future reference. 10. Mains adaptor: The mains adaptor
ページ5に含まれる内容の要旨
GB 14. Do not attempt to service the receiver yourself. Removing the cover may expose you to dangerous voltage, and will void the warranty. Refer all servicing to authorized service personnel. Refer all servicing to authorized service personnel. 15. Never push objects of any kind into this radio through opening as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. 16. Apparatus shall not be exposed to dripping o
ページ6に含まれる内容の要旨
Introduction The Sangean RCR-10 FM / AM Digital Tuning Clock Radio provides the following range of features: Radio for AM and FM (with RDS) broadcasts. Equipped with tone control (bass/treble), loudness compensation and bass reflex tube to enhance the sound performance 10 radio station presets (5 for AM and 5 for FM). Easy to read LCD display with adjustable backlight and illuminated buttons matching the light of LCD display. Two alarm timers with snooze feature to wake you to either buzzer, rad
ページ7に含まれる内容の要旨
Controls GB 1. iPod Universal Dock adjuster 9. Snooze / dimmer 2. iPod Dock connector 10. Source 3. Preset 4 / Play/pause 11. Standby / Sleep timer 4. Preset 5 / Fast Forward 12. Volume / Tone control 5. Tuning/Seek/Select control 13. Preset 1 / Folder Down 6. Info / Menu 14. Preset 2 / Folder Up 7. Alarm 2 15. Preset 3 / Back Forward 8. Alarm 1 6
ページ8に含まれる内容の要旨
Controls 16. LCD display 18. Speaker 17. Remote control sensor 7
ページ9に含まれる内容の要旨
Controls GB 19. FM antenna 22. Headphone 20. Aux In 23. AC in 21. Line Out 8
ページ10に含まれる内容の要旨
Controls 24. Battery compartment 9
ページ11に含まれる内容の要旨
Display icons GB A. Radio controlled time icon(Atomic radio controlled clock icon) B. PM indicator C. Time display D. Sleep timer icon E. Alarm 1 icon F. Alarm 2 icon G. Frequency / information for station display H. RDS icon I. Backup battery capacity indicator 10
ページ12に含まれる内容の要旨
Remote control a. Back forward b. Repeat one / all / folder c. Tuning up d. Folder up / preset up e. Folder down / preset down f. Tuning down g. Mute h. Snooze / dimmer i. Tone j. Volume down k. Volume up l. Repeat random m. Select n. Fast forward o. Play / pause p. Source q. Menu r. Standby / Sleep timer 11
ページ13に含まれる内容の要旨
Remote control functions GB Many functions of the RCR-10 clock radio can be operated using the remote control. Some operations require a longer press of the button. In this case simply keep your finger held on the remote control button for 2-3 seconds until the display on the radio shows that the command has been accepted. Before the first operation: please remove the small transparent foil from the battery holder to activate the battery. Remote control battery replacement 1. Open the battery ho
ページ14に含まれる内容の要旨
Using the radio for the first time Using the AC power adaptor Backup battery operation (for US version only) The AC power adaptor required for this unit should be 9 volts AC 1. Remove the battery cover on the bottom of the unit. at 1.4A. 2. Insert two UM-3 (AA size) batteries into the spaces in Insert the adaptor plug into the AC socket on the rear of the radio. the compartment. Plug the adaptor into a standard mains socket outlet. 3. Take care to ensure all batteries are inserted with correc
ページ15に含まれる内容の要旨
Operating your radio – Search tuning AM/FM GB 1. Press the Standby button to switch on your radio. 2. Press the Source button as needed until the AM or FM band is selected. 3. Press and release the Tuning control to carry out an auto-tune. Your radio will scan up the AM/FM band from the currently displayed 2 frequency and will stop scanning automatically when it finds a station of sufficient strength. 4. After a few seconds the display will update. The display will show the f
ページ16に含まれる内容の要旨
Manual tuning – AM/FM 1. Press the Standby button to switch on your radio. 2. Press and release the Source button to select AM or FM radio mode. 3. Rotate the Tuning control to tune to a station. The FM frequency will change in steps of 100kHz/50kHz and AM frequency will change in steps of 10kHz/9kHz. 2 4. When the end of the waveband is reached your radio will recommence tuning from the opposite end of the waveband. 5. Use the Volume control to adjust the sound level as required. 3
ページ17に含まれる内容の要旨
Setting up the tuning step increment GB 1. Press and hold the Info/menu button to enter the menu setting when the radio source is in AM/FM mode. 2. Rotate the Tuning control until FM xxkHz or AM xxkHz appears on the display, and press and release the Tuning control to enter the step increment setting. 2,3 3. Rotate the Tuning control to select 100kHz/200kHz for FM radio, and 9kHz/10kHz for AM radio. Then press and release the Tuning control to confirm the setting. 16
ページ18に含まれる内容の要旨
Display modes – FM Your radio has a range of display options for FM radio mode. 1. Repeatedly press and release the Info/menu button to view the RDS information of the station you are listening to. a. Station name Displays the name of the station being listened to. b. Program type Displays the type of station being listened to such as Pop, Classic, News, etc. c. Radio text Displays radio text messages such as new items etc. d. Stereo/Mono Displays the radio broadcasting is in Stereo or Mono
ページ19に含まれる内容の要旨
FM range setting GB FM range are different from countries to countries. It is necessary to adjust FM range to allow the radio to work properly. 1. Press and hold the INFO/MENU button to enter the menu setting. 2. Rotate the TUNING control till the range of FM shows on the display (refer to the picture in the right). Press the control to select the desired FM range. FM range setting is then completed. The available FM range is as following: 87-108 for the common area (default)
ページ20に含まれる内容の要旨
Presetting stations in AM/FM mode There are 5 preset stations each for AM and FM radio. They are used in the same way for each waveband. 1. Press the Standby button to switch on your radio. 2. Press the Source button to select the desired waveband. Tune to the required radio station as previously described. 3. Press and hold the required Preset button (1 to 5) until the display shows “P4” for example after the frequency. The station will be stored using the preset number. Repeat this
