ページ1に含まれる内容の要旨
CR9931
3 Band Auto Time Set Dual Alarm
Clock Radio
Please read this manual before use
ROBERTS
Sound for Generations
ページ2に含まれる内容の要旨
Controls 91 (Top)0 11 3 8 12 7 2 6 13 5 14 1 4 (Left side) (Right side) 1. Dimmer switch 6. Time set button 11. Volume control 2. Alarm selector switch 7. Reverse button 12. Waveband switch 3. Function switch 8. Forward button 13. Snooze button 9. Time capsule 14. Tuning control 4. Sleep button 5. Alarm set button 10. Headphone socket 1
ページ3に含まれる内容の要旨
Controls (Front) 17 18 16 15 20 19 15. Alarm 2 indicator 18. LED dial pointer 16. Alarm 1 indicator 19. PM indicator 17. MSF indicator 20. Battery compartment (on underside) 2
ページ4に含まれる内容の要旨
Automatic clock setting When you plug in your clock radio for the first time it will receive and synchronise to the official UK standard frequency and time signal transmitter (MSF) located at Rugby in the U.K. At certain times of the year the MSF transmitter closes down for maintenance during this time it will be necessary to set the clock manually (see the sections headed Setting the time manually). Recorded information on transmitter status can be obtained on 020 8943 6493. Your clock radio
ページ5に含まれる内容の要旨
Setting the time manually 1. To set the time, press and hold down the Time button. 2. Whilst holding down the Time Set button press the Forward or Reverse buttons to set the time. Release the buttons when the correct time is reached. The clock uses a 12 hour display with a PM indicator. Ensure that the correct 12 hour cycle is selected. 3. After setting the time, the CR9931 will continue to run on its own internal time memory and will automatically synchronise itself with the radio time signal
ページ6に含まれる内容の要旨
Setting alarm times The alarms can be set to wake you by either the buzzer or the radio. Your alarm clock radio has 2 separate alarms which can be set to activate at different times. Setting alarm 1 1. Slide the Alarm function switch to the ‘ ’ position. 2. Press and hold down the ALARM/OFF button. 3. Whilst holding down the ALARM/OFF button press the Forward or Reverse buttons to set the required alarm time. Release the buttons when the correct alarm time is reached. The clock uses a 12 ho
ページ7に含まれる内容の要旨
Checking the Alarm Times 1. To check alarm 1 time, set the Alarm function switch to the ' ' 1 position. 2. Press the ALARM/OFF button to display the alarm 1 time. 3. To check alarm 2 time, set the Alarm function switch to the ' ' 2 position. 4. Press the ALARM/OFF button to display the alarm 2 time. Note: The alarm times cannot be checked if the Alarm function switch is in the ' ' position. 1+2 6
ページ8に含まれる内容の要旨
Setting the alarms to wake to buzzer 1. Set the alarm time as previously described. 2. Set the Function switch to the 'Buzz' position. 3. Set the Alarm selector switch to the ' ' or' ' position. The corresponding Alarm indicators will light. The buzzer alarm will sound every day at the preset time for 60 minutes. To turn off the alarm until the next day press the ALARM/ OFF button. To turn off the alarm permanently set the Function switch to the 'Off' position. 4. Setting the alarm selector
ページ9に含まれる内容の要旨
Snooze control 1. The radio or buzzer alarm can be silenced for 9 minutes by pressing the Snooze button. This sequence can be repeated during the 60 minute alarm period. Sleep timer The radio can be set to turn off after a preset time has elapsed. 1. Press and hold down the SLEEP button. 2. Set the sleep time using the Forward or Reverse buttons (maximum 1 hour 59 minutes in 1 minute steps). The radio will switch off after the sleep time has elapsed. 3. To cancel the sleep function before the
ページ10に含まれる内容の要旨
General Fuse Do not allow this unit to be exposed to water or steam. It is recommended This apparatus must be protected by a 3A fuse (BS1362) in a 13A plug that the FM band be used wherever possible as better results in terms (BS1363). If another type of plug is used a 5A fuse should be fitted in of quality and freedom from interference will usually be obtained than the plug, adaptor or distribution board. on the MW or LW bands. IF IN DOUBT - CONSULT A QUALIFIED ELECTRICIAN. Mains supply Back-up
ページ11に含まれる内容の要旨
Specifications Circuit Features Power Requirements Loudspeaker 8 ohms Mains AC 230 volts, 50Hz only Output power 350mW Back-up Battery 2 X LR03 (AAA size) Aerial System FM Wire Aerial Frequency Coverage FM 87.5 - 108MHz MW Built-in Ferrite aerial MW 525 - 1610kHz LW 150 - 260kHz LW Built-in Ferrite aerial The Company reserves the right to amend the specification without notice. 10
ページ12に含まれる内容の要旨
Guarantee This clock radio is guaranteed for twelve months from the date of delivery to the original owner against failure due to faulty workmanship or component breakdown, subject to the procedure stated below. Should any component or part fail during this guarantee period it will be repaired or replaced free of charge. The guarantee does not cover: 1. Damage resulting from incorrect use. 2. Consequential damage. 3. Product with removed or defaced serial numbers. Procedure: Any claim under this
