ページ1に含まれる内容の要旨
Operating instructions
Built-in Plate Warmer
EGW 4060-14
To prevent accidents and
UV
machine damage read
these instructions
before
installation or use. M.-Nr. 06 543 300
ページ2に含まれる内容の要旨
2
ページ3に含まれる内容の要旨
Contents IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Guide to the machine. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Before using the plate warmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Controls . . . . . . . . . . . . . . .
ページ4に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS Installation This appliance is intended for Before installation make sure that residential use only. Only use the the voltage and frequency listed on appliance for its intended purpose. the data plate correspond with the household electrical supply. This data Improper use of the appliance can must correspond in order to prevent lead to personal injury and material injury and machine damage. If in doubt, damage. The manufacturer cannot consult a qualified technician.
ページ5に含まれる内容の要旨
IMPORTANT SAFETY INSTRUCTIONS Installation, repair and Do not use the plate warmer to maintenance work should be reheat, cook or keep food and performed by a Miele authorized drinks warm. The condensation from service technician. Work by unqualified food or drinks could lead to moisture persons could be dangerous and may damage in the appliance. void the warranty. Do not lean or sit on the warming Hardwiring the appliance should drawer. This will damage the be performed by a certified drawer. Th
ページ6に含まれる内容の要旨
Guide to the machine a On/Off button b Temperature selector c Warming drawer d Non-slip mat e Indicator 6
ページ7に含まれる内容の要旨
Before using the plate warmer ^ Clean the plate warmer with a damp cloth and wipe dry. ^ Heat the empty plate warmer for a minimum of 2 hours. Turn the temperature selector to "Maximum" (see "Selecting a temperature"). ^ Vent the room when heating the drawer for the first time. Metal components have a protective coating which may give off a slight odor the first time your new appliance is heated. The smell will dissipate after a short time and does not indicate a faulty connection. 7
ページ8に含まれる内容の要旨
Use Controls The plate warmer is only intended for warming dishes. Do not use the plate warmer to reheat, cook or keep food and drinks warm. Condensation from food and drinks may cause moisture damage to the appliance. Use pot holders when removing dishes. The drawer can hold a maximum of 55 lbs (25 kg). The controls consist of the temperature The appliance works with a convection selector and the On/Off button. They system. A fan distributes the heat are only visible when the drawer is evenly t
ページ9に含まれる内容の要旨
Use Operating Selecting a temperature ^ Place the dishes in the drawer. The temperature selector allows you to select a temperature between 86° and ^ Select a temperature. 176 °F (30 and 80 °C). ^ Turn the appliance on (j). Do not turn the knob The button will light. counterclockwise or clockwise past ^ Close the drawer. the 9 o’clock position. Forcing it beyond these positions will damage The drawer may open again if closed the temperature selector. too forcefully. When the selected temperature
ページ10に含まれる内容の要旨
Use Warming times Capacity Various factors will affect the warming The capacity of the appliance depends times: on the dish sizes. – type and thickness of dishes, The maximum load is 55 lbs (25 kg). – quantity, The following assembly picture is an example. – how dishes are arranged, and the – temperature setting. As you use the plate warmer you will learn which settings suit your needs best. However, the following information can be used as a guide. At a temperature setting of r, (about 140 °F (
ページ11に含まれる内容の要旨
Cleaning and care Cleaning the plate warmer Non-slip mat The mat can be removed to clean the Let the drawer cool before cleaning. bottom of the drawer. Never use abrasive cleaners, ^ Clean the mat by hand with warm scouring pads, steel wool or caustic water and liquid dish soap. (oven) cleaners on the plate warmer. ^ Dry thoroughly. Do not return the mat They will damage the surface. until it is completely dry. The exterior of the plate warmer can be cleaned with warm water and liquid dish soap
ページ12に含まれる内容の要旨
Frequently asked questions Repairs should only be carried out by an authorized technician in accordance with local and national safety regulations. Unauthorized repairs could cause injury or machine damage. The manufacturer cannot be held responsible for unauthorized work. Why are the dishes not warm enough? Possible fault Fix The appliance is turned off. Turn the appliance on with the On/Off button. The wrong temperature was selected. Check the temperature setting. The vents were blocked by dis
ページ13に含まれる内容の要旨
After sales service In the event of a fault which you cannot correct yourself contact the Miele Technical Service Department. U 1-800-999-1360 techserv@mieleusa.com V 1-800-565-6435 service@miele.ca When contacting Technical Service, please quote the model and serial number of your appliance both of which are shown on the enclosed data plate. Adhere the data plate to the box below. Make sure the model given on the data plate matches that of this manual. 13
ページ14に含まれる内容の要旨
14
ページ15に含まれる内容の要旨
Installation Instructions
ページ16に含まれる内容の要旨
Help protect our environment Disposal of the packing Disposal of an old appliance material Old appliances contain materials which can be recycled. Please contact your The transport and protective packing local recycling center about potential materials are environmentally safe for recycling. disposal and may be recycled. Ensure that the appliance presents no Ensure that any plastic wrap is danger to children while being stored disposed of safely and kept out of the for disposal. reach of childre
ページ17に含まれる内容の要旨
Installation Installation Safety Instructions To install the combination appliance please see the manual Before installation make sure that supplied with that machine. the voltage and frequency listed on the data plate correspond with the This appliance is not designed for household electrical supply. This data maritime use or for use in mobile must correspond in order to avoid risk installations such as recreational of damage to the appliance. If in doubt, vehicles or aircraft. However, under c
ページ18に含まれる内容の要旨
Installation Combinations EGW 40x0 -14 Oven H 4120, H 4220 Microwave-compact oven 18
ページ19に含まれる内容の要旨
Installation Steam ovens CVA 19
ページ20に含まれる内容の要旨
Installation Installing the appliance The installation kit contains 3 metal strips with adhesive on the back side. ^ Set the plate warmer into the niche, push it all the way in and align it at a Fix the metal strips on the plate warmer right angle. so that the gap between the appliance and the cabinet is sealed. This air cushion acts as insulation. ^ Remove the protective foil from the adhesive on the metal strip. ^ Align and fix the metal strips, according to the illustration, flush with the si
