ページ1に含まれる内容の要旨
TRAVEL RADIO-CONTROLLED
PROJECTION CLOCK
MODEL: RM888PA
USER'S MANUAL
SECTION 1 INTRODUCTION
Congratulations on your purchasing the RM888PA RF Travel
Projection Clock.
The Travel Clock has a slim, compact design i.e. ideal for travel.
The RM888PA is designed to automatically synchronize its current
time and date when brought within range with the U.S.Atomic
Clock.
The Travel Clock has features such as time with alarm on/off status
projection, multilingual day-of-the-week display, back-light,
ページ2に含まれる内容の要旨
B. ANALOG CLOCK DISPLAY E D C F 1. Analog clock display 2. Radio-reception icon 3. Alarm-on indicator A CONTROL BUTTONS B 2 1 C. [MODE] BUTTON 1 Press to change the display mode or press and hold to enter the 2 setting mode 3 D. [ALARM] BUTTON Press to select the daily alarm function or press and hold to enter the setting mode I E. [ ] AND [ ] BUTTONS Change the value of a setting F. [SNOOZE/ ] BUTTON H Press to activate the snooze function or turn on the back-light DC 7.5V J and projection G
ページ3に含まれる内容の要旨
Battery Installation: J. [FOCUS] KNOB Adjusts the focus of projection 1. Remove the battery compartment door. K. 7.5 V DC JACK (with rubber-cover attached) 2. Insert two AAA-sized (UM-4) 1.5V batteries as shown. For AC power adapter installation 3. Press RESET. 4. Replace the battery compartment door. BEFORE YOU BEGIN When the battery power level is low, the analog clock display will start to blink. Replace the batteries or connect it with AC power In order to operate this unit slide the [LOCK]
ページ4に含まれる内容の要旨
Note: Remember to leave the projection lens uncovered when the HOW TO USE THE PROJECTION continuous projection function is being activated. When you are not using the clock projection feature, slide the At night-time the projection makes it easy to read the time and the [LOCK] switch close in order to protect the lens and lock the keys. alarm on/off status. 1. Slide the [LOCK] slide switch to expose the projection lens. 2. Press [SNOOZE/ ] to turn on the projection for 5 seconds. SECTION 2 The c
ページ5に含まれる内容の要旨
Example of Digital and Analog Display: (Fig.1) Home-time (Radio-controlled time) - 12:55pm (12:55) Local-time - 5:55pm (17:55) (hour offset = +5 hours) To display the alarm clock and details, press [ALARM]. The daily alarm time will appear in both the analog and the digital displays. Example: ABOUT RADIO RECEPTION The RM888PA will automatically synchronize current time and date with the signal broadcast by the US Atomic Clock when the product is in reception range of the signal. When the unit is
ページ6に含まれる内容の要旨
3. Press [MODE]. When it is receiving radio signal, the radio-reception icon [ ] (strong signal) or [ ] (weak signal) will start to blink. A com- 4. Enter the clock format using [ ]/[ ]. You can select 12-hour or plete reception generally takes about 2 to 10 minutes, depending 24-hour display. on the strength of the radio signal. After that, the periodical scan- 5. Press [MODE]. ning will take only a few seconds. 6. Enter the hours using [ ]/[ ]. Hold down either button for 2 When the recep
ページ7に含まれる内容の要旨
12. Press [MODE] to save the changes and exit. If changes are HOW TO USE THE DAILY ALARM made during the process, the seconds will reset and start from zero. The alarm will go off for 2 minutes in a two-step crescendo pattern. The unit will also save all changes and return to normal display The alarm-on indicators will flash, the back-light and the clock automatically after the unit has been left idle for a minute or when projection will be activated for 5 seconds. To mute the alarm, press [ALA
ページ8に含まれる内容の要旨
Company Name: Oregon Scientific, Inc. PRECAUTIONS Address: 19861 SW 95th Place, Tualatin, Oregon 97062, USA This product is engineered to give you years of satisfactory Website address: www.oregonscientific.com service if you handle it carefully. Here are a few precautions: 1. Do not immerse the unit in water. CUSTOMER ASSISTANCE 2. Do not clean the unit with abrasive or corrosive materials. They Should you require assistance regarding this product and its may scratch the plastic parts and corro
