ページ1に含まれる内容の要旨
PRINTER’S INSTRUCTIONS:
INSTR,INSTL,PERS-3600B - LINEAR P/N: 228305 AX1 - INK: BLACK - MATERIAL: 20 LB. MEAD BOND - SIZE: 8.500” X 11.000” - SCALE: 1-1 - FOLDING: ALBUM-FOLD - BINDING: SADDLE-STITCH
PERS-3600B
PERSONAL
EMERGENCY
REPORTING
SYSTEM
BY
BY
INSTALLATION & OPERATION
INSTRUCTIONS
USA & Canada (800) 421-1587 & (800) 392-0123
(760) 438-7000 - Toll Free FAX (800) 468-1340
www.linearcorp.com
ページ2に含まれる内容の要旨
DIGITAL COMMUNICATOR CONTENTS The Console’s digital communicator can route calls to three telephone numbers: primary, CONTROL AREA FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 secondary, and supervisory. General reporting codes and individual sensor reporting codes are REAR SIDE AND BOTTOM FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 programmable for the 4x2 format. Alternately, Ademco Contact ID form
ページ3に含まれる内容の要旨
TWO-WAY AUDIO VOLUME DIGITAL VOICE VOLUME 1. CONTROL AREA FEATURES 2. REAR SIDE AND BOTTOM FEATURES HOME INDICATOR NOTE: THE CONSOLE IS BACKUP � LIGHTS WHEN ACTIVITY TIMER IS ON SHIPPED WITH REMOVABLE BATTERY CONSOLE REAR � LIGHT IS OFF WHEN ACTIVITY TIMER IS OFF LABELS COVERING ACCESS DOOR STATUS INDICATOR � BLINKS SLOWLY WHEN LESS THAN 15 MINUTES SOME OF THE REAR � NORMALLY OFF REMAIN ON THE ACTIVITY TIMER CONNECTIONS � LIGHTS WHEN ANY TRANSMITTERS ARE � BLINKS QUICKLY WHEN THE ACTIVITY
ページ4に含まれる内容の要旨
5. TRANSFORMER INSTALLATION 6. APPLY POWER - SELECT DIALING METHOD PLUG TRANSFORMER 1 INTO AN UN-SWITCHED AC OUTLET SLIDE POWER SWITCH ON ON OFF NOTE: THE DEFAULT DIALING METHOD IS TONE DIALING IF REQUIRED, CHANGE THE DIALING METHOD BY PRESSING AND HOLDING THE HOME & CANCEL BUTTONS FOR 3 SECONDS WHILE SWITCHING THE POWER ON SECURE 2 TRANSFORMER WITH SCREW � 7 BEEPS SOUND FOR PULSE DIALING � 8 BEEPS SOUND FOR TONE DIALING 7. TRANSMITTER INSTALLATION OPTIONS 8. INSTALLING SINGLE TRANSMITTERS ADDS
ページ5に含まれる内容の要旨
9. INSTALLING MULTIPLE TRANSMITTERS 10. TESTING TRANSMITTERS ADDS MULTIPLE TRANSMITTERS 1 PRESS TEST BUTTON � CONSOLE ANNOUNCES 1 PRESS TEST BUTTON TEST MODE � CONSOLE ANNOUNCES TEST MODE 2 PRESS TEST BUTTON AGAIN 2 ACTIVATE EACH OF THE � CONSOLE ANNOUNCES ITS CONSOLE'S TRANSMITTERS, READY TO LEARN TRANSMITTERS ONE AT A TIME NOTE: EACH TIME THE TEST BUTTON IS PRESSED IN THE ADD TRANSMITTER MODE, THE CONSOLE WILL BE READY TO INSTALL A TRANSMITTER IN THE NEXT AVAILABLE SENSOR ZONE LOCATION. TH
ページ6に含まれる内容の要旨
13. LOCAL PROGRAMMING WITH RA-2400 14. SYSTEM OPERATION PERFORM THE STEPS DETAILED IN THE CONSOLE HOME LIGHT SHOWS 1 RA-2400/PERS REFERENCE GUIDE (P/N 224756) ACTIVITY TIMER STATUS STANDING BY TO SET UP THE RA-2400 PROGRAM THE OTHER POWER TO LOCALLY PROGRAM 2 CONSOLE LIGHT THE CONSOLE, CONNECT LIGHTS ARE IS ON THE MODEM'S LINE JACK NORMALLY TO THE CONSOLE'S LINE OFF JACK LINE-TO-LINE PRESS THE TEST BUTTON - IN CASE OF EMERGENCY - 3 MOMENTARILY � CONSOLE ANNOUNCES PRESS AND MOMENTARILY TEST MOD
ページ7に含まれる内容の要旨
17. SPEAKERPHONE OPERATION 18. SUPERVISORY CONDITIONS TRANSMITTER LOW BATTERY PROGRAM THE CONSOLE TO ENABLE SPEAKERPHONE MODE 1 WHEN A TRANSMITTER SENDS A LOW BATTERY SIGNAL THE NOTE: SPEAKERPHONE MODE CAN ONLY BE USED ON INCOMING CALLS CONSOLE'S STATUS INDICATOR WILL BLINK SLOWLY AND WILL NOT FUNCTION WHEN THE CONSOLE IS OPERATING FROM BACKUP BATTERY POWER. ATTEMPTING TO ANSWER WHILE THE CONSOLE TRANSMITTER SUPERVISORY IS ON BACKUP POWER WILL CAUSE AN EMERGENCY ALARM. IF A TRANSMITTER PROGRAMME
ページ8に含まれる内容の要旨
21. NON-VOICE PROMPT BEEP LEGEND 23. WIRELESS INSTALLATION TIPS WHEN VOICE PROMPTS ARE DISABLED, THE CONSOLE WILL SOUND BEEPS TO INDICATE VARIOUS CONDITIONS WALLBOARD AND WOOD STUDS CONSTRUCTION 1 BEEP ................... TRANSMITTER ADDED TO A SENSOR ZONE MATERIALS WILL AFFECT RADIO RANGE 1 LONG BEEP ........ SENSOR ZONES FULL 90% - 100% 2 BEEPS ................. CONSOLE IN STANDBY MODE, ACTIVITY TIMER ON OF FULL POWER 3 BEEPS ................. CONSOLE IN STANDBY MODE, ACTIVITY TIMER OFF CONCR
