ページ1に含まれる内容の要旨
WT-2192
Radio-controlled Travel Alarm Clock
ページ2に含まれる内容の要旨
Table of Contents Topic Page Inventory of Contents 2 About WWVB 2 Program Mode Initial Set-up 2 Manual Time Setting Option 3 Time Zone Setting 4 Daylight Savings Time (DST) 4 Display Mode Setting 4 Setting the Alarm 4 Operating the Alarm and Snooze 4 Troubleshooting 5 Maintenance and Care 5 Specifications 5 Warranty Information 6 INVENTORY OF CONTENTS 1. The travel alarm 2. Instruction manual 3. Warranty card ABOUT RADIO-CONTROLLED TIME - WWVB The NIST
ページ3に含まれる内容の要旨
• Please begin by removing the battery cover on the rear of the travel alarm shown in figure one. • Next insert one AA alkaline battery into the battery compartment making sure to observe the correct polarity. • When inserting the battery be sure not to press any of the buttons on the travel alarm as this will interrupt the WWVB search and may cause the travel alarm to not pick up the radio-controlled time signal. • Now replace the battery cover and face the travel alarm with the back of
ページ4に含まれる内容の要旨
• The time zone abbreviation will appear in the LCD. NOTE: The default (factory) time zone setting is Eastern time zone. • Press and release the “AL/HR” button to select the desired time zone. • Press and release the “Snooze” button twice to return to the normal display mode or wait 20 seconds and the travel alarm will time out and automatically return to the normal display mode. Daylight Saving Time Setting You can select whether or not your alarm recognizes the daylight saving
ページ5に含まれる内容の要旨
The alarm will sound for 100 seconds once activated. By pressing the snooze button the alarm will be suspended for 8 minutes. Operation of the snooze function can be done in two ways: • Press and release the “SNOOZE” button on the front of the travel alarm. • With the travel alarm resting open on a flat surface, by gently pushing back on the top of the alarm. NOTE: This movement causes the opened lid to activate a second snooze button which is located on the bottom of the travel alarm
ページ6に含まれる内容の要旨
WARRANTY INFORMATION La Crosse Technology provides a 1-year warranty on this product. Contact La Crosse Technology immediately upon discovery of any defects covered by this warranty. Before sending the unit in for repairs, contact La Crosse Technology. The unit will be repaired or replaced with the same or similar model. This warranty does not cover any defects resulting from improper use, unauthorized repairs, faulty batteries, or the units’ inability to receive a signal due to an
