ページ1に含まれる内容の要旨
Signature Arm Curl
Owners Manual
ページ2に含まれる内容の要旨
Arm Curl Safety & Warranty It is the sole responsibility of the purchaser of LIFE FITNESS products to read the owner's manual, warning labels and instruct all individuals, whether they are the end user or supervising personnel on proper usage of the equipment. It is recommended that all users of LIFE FITNESS exercise equipment be informed of the following information prior to its use. LIFE FITNESS recommends that all commercial fitness equipment be used in a supervised area. It is recommended
ページ3に含まれる内容の要旨
FOUND ON THE FRAME FOUND AT MOVING PARTS
ページ4に含まれる内容の要旨
Arm Curl Safety & Warranty WARRANTY WHAT IS COVERED This Life Fitness commercial exercise equipment (Signature Benches and Racks) is warranted to be free of all defects in material and workmanship to the original purchaser for the specific items and duration listed: 10 years on structural frame 1 year on bearings 1 year on grips 1 year on cables and belts (if so equipped) 1 year for rust or corrosion of structural frame. Scratches or scrapes where the subsurface of the unit has been exposed mus
ページ5に含まれる内容の要旨
HOW TO GET PARTS & SERVICE Simply call Customer Support Services at (800) 351-3737 or (847) 451-0036, Monday through Friday from 8:00 a.m. to 6:00 p.m. Central Standard Time, and tell them your name, address and the serial number of your Product. They will tell you how to get a replacement part, or, if necessary, arrange for service where your Product is located or advise you on how and where to ship the Product for service. Before shipping: 1. Obtain a Return Authorization Number (RA#) from C
ページ6に含まれる内容の要旨
Arm Curl Assembly Instructions Item Qty Description Part Number 1 1 Left Upright 79041XX 2 1 Right Upright 79042XX 3 1 Cross Brace 79057XX 4 4 M10 x 135mm Bolt 3256221 5 22 3/8” Flat Washer 3102514 6 6 M10 Nylock Nut 3242002 7 1 Arm Pad Support 79046XX 8 10 M10 x 25mm Bolt 3256202 9 1 Arm Pad Assembly 79060XX 10 2 M10 x 20mm Bolt 3256201 11 6 1” Hole Plug 3237403 Tools Required: 17mm Wrench Metric Allen Wrench Set Ratchet with 17mm Socket Rubber Mallet Ratchet Extension
ページ7に含まれる内容の要旨
1. LOOSELY assemble the LEFT UPRIGHT (2) and RIGHT UPRIGHT (3) to the CROSS BRACE (3) using four M10 X 135mm BOLTS (4), eight 3/8" SAE WASHERS (5), and four M10 NYLOCK NUTS (6) as shown. NOTE: Be sure the CROSS BRACE is oriented with the pads facing upwards as shown. 2. Assemble ARM PAD SUPPORT (7) to the LEFT UPRIGHT (2) and RIGHT UPRIGHT (3) using four M10 X 25mm BOLT (8), six 3/8" SAE WASHERS (5) and two M10 NYLOCK NUTS (6) as shown. Tighten all BOLTS secure- ly. Install 1" HOLE PLUGS (11)
ページ8に含まれる内容の要旨
Arm Curl Assembly Instructions © 2006 Life Fitness, a division of Brunswick Corporation. All rights reserved. Life Fitness is a registered trademark of Brunswick Corporation. SAC 10.20.06 8171900 RevA-1
