ページ1に含まれる内容の要旨
iBT20 Eng IB
Size: 153mm x 120mm
Printing color: Black
P1
Apr 25, 2013
iBT20
Bluetooth Wireless
FM Clock Radio
with USB Charging
instruction manual
ページ2に含まれる内容の要旨
P2 iBT20 Introduction Thank you for purchasing the iHome iBT20. This product is designed to provide high quality wireless sound for your iPad, iPhone, iPod or other Bluetooth audio device. Along with the included Quick Bluetooth Connection Guide this instruction booklet explains the basic operation and care of the unit. Please read them carefully and keep for future reference. Maintenance � Place the unit on a level surface away from sources of direct sunlight or excessive heat. � Protect yo
ページ3に含まれる内容の要旨
P3 iBT20 FCC ID: EMOIBT20 FCC Information IC: 986B-IBT20 FCC Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This Device complies with RSS-210 of the IC Rules; Operation is subject to the following two conditions: (1) This device may not cause interference and (2) This device must accept any interfere
ページ4に含まれる内容の要旨
P4 iBT20 Table of Contents Meet Your iBT20........................................................................................................... 1-3 The Display/Setting Up the Unit ..........................................................................................4 Setting the Clock/ FM Radio..............................................................................................5 Setting and Using FM Presets.......................................................................
ページ5に含まれる内容の要旨
P5 iBT20 Included � iBT20 system � 100V-240V universal AC adaptor � 3.5mm audio cable audio cable iBT20 power adaptor 1
ページ6に含まれる内容の要旨
P6 iBT20 Meet Your iBT20 Top Volume Down Button Power Button Volume Up Button Minus/ Plus Settings Buttons Play/ Pause and Presets Button Nap/ Clock Set Button Alarm Button Mode Button Sleep Button Snooze/ Dimmer Button 2
ページ7に含まれる内容の要旨
P7 iBT20 Meet Your iBT20 Back USB Charging Port Pairing Button Aux-in Jack DC Jack Antenna Bottom Backup Battery Compartment 3 (pull battery tab before use)
ページ8に含まれる内容の要旨
P8 The Display Using the iBT20 Low Backup Battery Indicator Time Display PM/AM Indicators Bluetooth Alarm Active Indicator Pairing FM Mode Indicator Indicator Aux-in Mode Indicator Snooze Mode Indicator Wake to Alarm Source Indicators: Bluetooth Audio Indicator Tone, Radio, Bluetooth device Setting Up the Unit Connect the included AC adaptor to the DC jack RESET TEST located on the back of the unit and connect the other end to a working wall outlet. 4 TEST RESET
ページ9に含まれる内容の要旨
P9 Using the iBT20 Setting the Clock 1. Press and hold the Nap/Clock Set Button for 2 seconds until the clock display flashes and a beep sounds. 2. Press the – or + Buttons to adjust the clock to the current time (hold for rapid setting). Make sure you set the correct AM/PM time. The AM and PM indicators appear to the left of the display. 3. To toggle the clock display between standard 12 hour time and 24 hour (“military”) time display, press the Alarm Button during time setting. 4. Pr
ページ10に含まれる内容の要旨
P10 Using the iBT20 Setting and Using FM Presets The unit allows you to store up to 6 FM radio station presets 1. Press the Button on the unit to turn it on. 2. Press and release the Mode Button as needed until the FM indicator icon and current FM radio station appear on the display. 3. Press and release the Presets Button as needed until the preset number (P1- P6) you wish to set is displayed, then press and hold the Presets Button to enter setting mode. 4. Press the – or
ページ11に含まれる内容の要旨
P11 Using the iBT20 Setting and Using the Alarm Note: each step must be completed while display is flashing or step will time-out with any changes saved. 1. Press and hold the Alarm Button for 2 seconds until the time display and alarm icon flash. 2. Press the – or + Buttons to adjust the alarm time to the desired time (hold for rapid setting). Make sure you set the correct AM/PM alarm time. The AM and PM indicators appear to the left of the display. 3. Press the Alarm Button to confirm
ページ12に含まれる内容の要旨
P12 Using the iBT20 Snooze/Dimmer Button 1. To program Snooze, press and hold the Snooze/Dimmer Button during normal operation (when no alarm is sounding). 2. Press the – or + Buttons to select the desired snooze time (between 01 and 29 minutes). 3. Press and release the Snooze/Dimmer Button to confirm Snooze setting 4. While the alarm is sounding, press and release the Snooze/Dimmer Button to temporarily silence the alarm for the set duration (9 minutes is the default). Snooze can be u
ページ13に含まれる内容の要旨
P13 Using the iBT20 Using Bluetooth: Pairing Your Device 1. Turn on your Bluetooth-enabled device and turn on Bluetooth capability as described in the device’s user manual. 2. Press and hold the Pairing Button on the back of the unit for 2 seconds until the Bluetooth icon flashes on the display and a beep sounds, indicating pairing attempt. “iHome iBT20” should appear on your device’s menu. If “Not Paired”, “Not Connected” or similar message appears, select “iHome iBT20” on the device to co
ページ14に含まれる内容の要旨
P14 Using the iBT20 Playing Audio Via Bluetooth 1. Press the Button to turn the unit ON. 2. Press and release the Mode Button as needed until the Bluetooth wave indicator icon appears on the display. 3. Press the Play Pause Button on the unit to play audio from your linked Bluetooth device. 4. Press the – or + Buttons to go to the previous or next track. 5. Press the or Buttons to adjust the volume on the unit. 6. When done listening, press the Button to turn the
ページ15に含まれる内容の要旨
P15 Using the iBT20 Charging Devices via USB Port 1. Connect the standard size end of a USB cable (not included) to the USB Port on back of the unit and connect the other end to the charging port on your device. 2. Monitor the charging on your device. Some devices use a proprietary charging method and will not charge using the USB Port. If this happens, you must charge your device using the charger that came with it. NOTE: unit must be plugged into working outlet to charge devices Using FM
ページ16に含まれる内容の要旨
P16 Using the iBT20 Replacing and Installing Clock Backup Battery Note: The CR2450 lithium battery is included in the unit. Please pull out the battery pull tab before you use the unit. This model is equipped with a battery backup circuit that will maintain the time and alarm time settings in the event of a temporary power interruption (the display is NOT maintained). The battery backup circuit will also operate the buzzer alarm to wake you up at the selected wake up time even if the power is
ページ17に含まれる内容の要旨
P17 Troubleshooting Unit doesn’t respond (no power) � Check that all connections are correct and properly plugged in. � Make sure your device is properly paired with the iBT20. � Make sure the Power is ON. Unit doesn’t respond (locked up or frozen) � The unit may need to be reset. To do so, unplug the unit from power source and remove the backup battery. Let unit stand for 2 minutes. Re-install backup battery and connect unit to power source. You will need to reset the clock, radio
ページ18に含まれる内容の要旨
P18 Consumer Product Safety Guide IMPORTANT SAFETY INSTRUCTIONS When used in the directed manner, this unit has been designed and manufactured to ensure your personal safety. However, improper use can result in potential electrical shock or fire hazards. Please read all safety and operating instructions carefully before installation and use, and keep these instructions handy for future reference. Take special note of all warnings listed in these instructions and on the unit. 1. Water and
ページ19に含まれる内容の要旨
P19 8. Attachments – Do not use attachments not recommended by the product manufacturer. 9. Lightning and Power Surge Protection – Unplug the unit from the wall socket and disconnect the antenna or cable system during a lightning storm or when it is left unattended and unused for long periods of time. This will prevent damage to the product due to lightning and power-line surges. 10. Overloading – Do not overload wall sockets, extension cords, or integral convenience receptacles as this can
ページ20に含まれる内容の要旨
P20 Limited 1 Year Warranty iHome Products, a division of SDI Technologies Inc. (hereafter referred to as SDI), warrants this product to be free from defects in workmanship and materials, under normal use and conditions, for a period of one (1) year from the date of original purchase. Should this product fail to function in a satisfactory manner, it is best to first return it to the store where it was originally purchased. Should this fail to resolve the matter and service still be required by
