ページ1に含まれる内容の要旨
Stereo Radio, CD-R/RW Player
with Dual Alarm Clock
OWNER’S MANUAL
CKD1100 (Silver Color)
CKD1100BL (Blue Color)
CKD1100GN (Green Color)
CKD1100PK (Pink Color)
Visit our web site at www.emersonradio.com
CKD1100_052107.p65 30 21/5/2007, 10:44
ページ2に含まれる内容の要旨
CAUTION TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! The lightning flash with arrow- WARNING: TO REDUCE THE The exclamation point within head symbol, within an equi- an equilateral triangle is in- RISK OF ELECTRIC SHOCK lateral triangle is inten
ページ3に含まれる内容の要旨
Before We Begin Thank you for purchasing this Emerson audio product. The Emerson brand is your assurance of quality, performance and value. Our engineers have included many useful and convenient features in this product. Please be sure to read this Owner's Manual completely to make sure you are getting the maximum benefit from each feature. This product was manufactured using the highest quality components and standards of workmanship. It was tested by Emerson inspectors and found to be in perfe
ページ4に含まれる内容の要旨
IMPORTANT NOTES CLASS 1 LASER PRODUCT CAUTION CLASS 1 LASER PRODUCT INVISIBLE LASER RADIATION APPAREIL Á LASER DE CLASSE 1 WHEN OPEN AND INTERLOCKS DEFEATED. PRODUCTO LASER DE CLASE 1 AVOID EXPOSURE TO BEAM This product contains a low power Laser Device. • Avoid installing this unit in places • Operate controls and switches as exposed to direct sunlight or close to described in the manual. heat radiating appliances such as • Before turning on the power, make electric heaters, on top of other ste
ページ5に含まれる内容の要旨
PREPARATION FOR USE Unpacking And Set Up • Remove the unit from the carton, and remove all packing materials from the unit. • Save the carton and packing materials in case the unit ever needs to be returned for service. Using the original carton and packing materials is the only way to safely repack the unit for shipment. • Remove any descriptive labels or stickers from the top or front of the unit. Do not remove any labels from the back or bottom of the cabinet. • Remove any small strip
ページ6に含まれる内容の要旨
Power Source This system is designed to operate on 120V AC 60Hz house current only. Connecting this system to any other power source may cause damage to the system and such damage is not covered by your warranty. NOTE: The system has polarized AC plug with one wide blade and one narrow blade. The plug will only fit into matching polarized AC outlets. This is a safety feature to reduce the possibility of electric shock. If the plug will not fit in your AC outlet, you probably have an outdated non
ページ7に含まれる内容の要旨
Battery Back Up System This unit uses a single 9-Volt battery (not included) to maintain the time and alarm settings in the event that it is accidentally unplugged, or you experience a temporary power failure. We recommend that you install a well-known brand of Alkaline battery for longest life and best performance. To keep the battery back up system operational you should install a new battery every 6 to 9 months. To install the back up battery, turn the unit upside down. 1.) Press on the small
ページ8に含まれる内容の要旨
LOCATION OF CONTROLS AND INDICATORS Front Panel 8 6 7 9 5 10 4 3 11 2 12 1 15 14 13 Top Panel 25 24 23 23 26 22 21 27 20 28 19 18 29 17 30 16 31 7 CKD1100_052107.p65 7 21/5/2007, 10:44
ページ9に含まれる内容の要旨
1.) AM/PROG. (AM Radio ‘On’ or CD Program Track) Indicator. 2.) AL2 (Alarm 2) ‘On’ Indicator. 3.) VOLUME Control. 4.) AL1 (Alarm 1) ‘On’ Indicator. 5.) PM Indicator. 6.) TIME-DN/F.REV Button. 7.) STOP Button. 8.) CD PLAY/PAUSE Button. 9.) TIME-UP/F.FWD D Button. 10.) SLEEP Indicator. 11.) TUNING Control. 12.) FM Radio ‘On’ Indicator. 13.) LED Display. 14.) AUX Jack. 15.) PHONES Jack. 16.) ALARM 1 Button. 17.) RADIO/BAND Button. 18.) CLK.ADJ/PROG. Button. 19.) DIMMER (HIGH/LOW)
ページ10に含まれる内容の要旨
OPERATING INSTRUCTIONS Setting The Correct Time And Day NOTE: Connect the power cord to your AC outlet. Make sure to use an outlet that is always ‘ live’ . Do not use an outlet that is controlled by a wall switch. 1.) When the unit is plugged in for the first time, the clock display will begin flashing “12:00” (AM). 2.) Depress and hold the CLK.ADJ/PROG. button for at least two seconds until only the Hour digits continue to flash. 3.) While the Hour digits are flashing press the or buttons rep
ページ11に含まれる内容の要旨
8.) When the correct ‘ day’ (digit) appears on the display press the CLK.ADJ/PROG. button once more to exit the clock-setting mode. The display stops flashing and returns to the correct time and the clock begins to run. IMPORTANT: After you press the CLK.ADJ/PROG. button you must make your time adjustments within 10 seconds while the display is flashing. After 10 seconds the display stops flashing and no time adjustments can be made. If this occurs you must begin with Step 2 above and start the
ページ12に含まれる内容の要旨
Listening To The Radio 1.) Press the ALARM OFF/POWER button on the top panel to turn the unit ‘ On ’. The POWER LED indicator comes on. 2.) Press the RADIO/BAND button to select the Radio function. Either the AM/PROG or the FM indicator will come on to confirm which band is selected. Press the RADIO/BAND button again to repeatedly switch between the AM and FM bands. 3.) Rotate the TUNING control on the right side panel to tune to the desired station. 4.) Rotate the VOLUME control on the left sid
ページ13に含まれる内容の要旨
Playing Compact Discs NOTE: Although this CD player can read CD-R and CD-RW discs, in addition to normal CDs, however the playability of CD-R/RW discs may be affected by the type of software that was used to create the discs, as well as the quality and condition of the blank media you are using. 100% playability cannot be guaranteed. This is not an indication of a problem with the player. Normal Playback 1.) Press the ALARM OFF/POWER button to switch the unit ‘ On’ . The POWER LED indicator come
ページ14に含まれる内容の要旨
6.) Press the CD PLAY/PAUSE button to begin playback. The display will briefly show “cd: 1” (Track 1) and playback on track 1 begins. After a few seconds the display returns to the correct time. 7.) To Pause briefly during playback press the CD PLAY/PAUSE button. The two dots “ : ” flash and after a few seconds the display returns to correct time. The sound stops, but the disc continues to spin. Press CD PLAY/PAUSE button again to cancel pause and resume playback. 8.) To skip forward or back
ページ15に含まれる内容の要旨
To Start Playback From A Specific Track Load your disc and wait until the display shows the total number of tracks. Press the or buttons to select the desired track. While the track number is still appearing press the CD PLAY/PAUSE button. Playback will begin on the selected track and continue until the end of the disc. High Speed Music Search You can search rapidly forward or backward within a track to locate a specific musical passage. Depress and hold the or buttons to begin high speed s
ページ16に含まれる内容の要旨
Programmed Playback The CD player in this unit has a 20 track programmable memory which allows you to program any disc to play just the tracks you want to hear in the exact order that you want to hear them. You may program a track or tracks to play more than once if desired. NOTE: Programming can only be done while the player is in the Stop mode. If a disc is playing press the STOP button to stop playback before performing the programming steps below. 1.) Turn the unit ‘ On’ , press the CD PLA
ページ17に含まれる内容の要旨
6.) After you have programmed all the desired tracks press the CD PLAY/ PAUSE button to begin programmed playback. The AM/PROG. indicator stops flashing and remains ‘ On’ . Playback will begin on the first track you programmed and continue until all programmed tracks have been played. As each programmed track starts playing the display will briefly show the track number being played and then return to the correct time. NOTES: • After all programmed tracks have played the player stops but the
ページ18に含まれる内容の要旨
Adjusting the Wake-up Times This clock radio has two separate wake-up alarms that can be set and used independently. To set or adjust the wake-up times please proceed as follows: 1.) Depress and hold the ALARM SET/ DISPLAY button for at least two seconds until just the Hour digits and the AL1 (Alarm 1) indicator are flashing. 2.) While the AL1 Hour digits are flashing press the or buttons repeatedly to set the display to the correct wake-up hour. Example: 7:00 AM Observe the PM indicator to ma
ページ19に含まれる内容の要旨
6.) While the Alarm 2 Hour digits are flashing press the or buttons repeatedly to set the display to the correct wake-up hour. Example: 9:00 AM Observe the PM indicator to make sure you have set the wake-up hour correctly. If the PM indicator is ‘ On’ the wake-up time displayed is “PM”". If the PM indicator is ‘Off’ the wake-up time displayed is “AM”. 7.) When the correct wake-up hour is flashing press the CLK. ADJ/PROG. button again. The Hour digits stop flashing and the minute digits begin t
ページ20に含まれる内容の要旨
Setting The Alarms / Selecting The Wake-up Mode After you have adjusted the wake-up times on one or both alarms you must press the respective ALARM 1 and/or ALARM 2 buttons one, two or three times, to activate the alarms and select the wake-up mode. The color of the AL1 and AL2 indicators will change according to the wake-up mode that you select - Buzzer, Radio, or CD. • Press the ALARM 1 or ALARM 2 button once. The AL indicator is Red. This indicates the Wake To Buzzer mode is selected and the
