KTM Performer 690 SM/SMCの取扱説明書

ページ1に含まれる内容の要旨

Ktm 2007 690 SM/SMC and 2008 690 Duke installation guidelines:

1. Each bike varies with regard to welds and gussets. Review the photos first to get the idea of what needs to be done.
2. These photos may not be your exact model but depict the concept of what must be done.
3. Block the front tire securely before removing the top triple clamp so the tire cannot move at all. See photos.
4. Support the rear tire also, just enough to keep tension on the front tire so the forks stay tig

ページ2に含まれる内容の要旨

Red arrow shows clamping surface. Using a sharp file, start at the high spots Blue arrows shows where to file. and trial fit the bracket until it fits. Block the front wheel & forks Remove weld slag File the welds so the Machined groove stock groove shows all the way WRONG…. NOT FLUSH Tank and frame will be close clearances Ktm instructions.doc 5972