ページ1に含まれる内容の要旨
Dual Alarm AM/FM Clock Radio
®
with SmartSet
Auto Time Setting System
and Sure Alarm
(U.S. Patent No. 6,567,344)
OWNER’S MANUAL
CKS5060B (Black)
CKS5060S (Silver)
Visit our web site at www.emersonradio.com
CKS5060_090606.p65 24 6/9/2006, 9:46
ページ2に含まれる内容の要旨
CAUTION TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ! The lightning flash with arrow- WARNING: TO REDUCE THE The exclamation point within head symbol, within an equi- an equilateral triangle is in- RISK OF ELECTRIC SHOCK lateral triangle is inten
ページ3に含まれる内容の要旨
Congratulations! ® ® And thank you for purchasing this SmartSet Clock Radio from Emerson. SmartSet is the world’s first and only LED clock radio that will automatically set itself to the correct ‘ Year’ , ‘ Month’ , ‘ Date’ , ‘ Day’ , and ‘ Time’ as soon as you plug it in and every time the power is interrupted as well. We all know how annoying it is to wake up in the morning and see the dreaded flashing “12:00” display on our clocks or clock radios. This means that your power was interrupted so
ページ4に含まれる内容の要旨
IMPORTANT NOTES • Avoid installing this unit in places • Operate controls and switches as exposed to direct sunlight or close to described in the manual. heat radiating appliances such as • Before turning on the power, make electric heaters, on top of other stereo certain that the mains power cord is equipment that radiates too much properly installed. heat, places lacking ventilation or dusty • When moving the set, be sure to first areas, places subject to constant disconnect the mains power co
ページ5に含まれる内容の要旨
PREPARATION FOR USE Unpacking And Set Up • Remove the radio from the carton and remove all packing material from the radio. We suggest that you save the packing material, if possible, in the unlikely event that your radio ever needs to be returned for service. The original carton and packing material is the only safe way to pack your radio to protect it from damage in transit. • Remove any descriptive labels or stickers on the front or top of the cabinet. Do not remove any labels or stickers
ページ6に含まれる内容の要旨
Power Source This radio is designed to operate on normal 230V 50Hz Mains power only. Do not attempt to operate the radio on any other power source. You could cause damage to the radio that is not covered by your warranty. This radio should be connected to a Mains outlet that is always ‘ live’ . If you connect this radio to a wall outlet that is controlled by a switch, the switch should be left ‘ On’ at all times. When the power to the radio is interrupted, the built in lithium battery takes over
ページ7に含まれる内容の要旨
LOCATION OF CONTROLS AND INDICATORS Front Panel 3 4 5 2 6 1 7 8 Top Panel 14 15 13 16 12 17 18 11 19 10 9 20 21 Left Side Panel Right Side Panel 25 24 23 26 22 27 6 CKS5060_090606.p65 6 6/9/2006, 9:46
ページ8に含まれる内容の要旨
1.) AL 1 (Alarm 1 ‘ On’ ) Indicator. 2.) AM Indicator. 3.) Day Of Week (MON, TUE, WED, THU, FRI, SAT, SUN) Indicators. 4.) Time / Date Display. 5.) AL 2 (Alarm 2 ‘ On’ ) Indicator. 6.) LOW (Battery Low) Indicator. 7.) Back Up Battery Compartment (Bottom Cabinet). 8.) Lighted Dial Pointer. 9.) RADIO ON/OFF Button. 10.) TIME ZONE Button. 11.) DATE/MONTH Setting Button. 12.) TIME Setting Button. 13.) SLEEP Button (Sleep To Music Timer). 14.) Mains Power Cord (Back Cabinet). 15.) S
ページ9に含まれる内容の要旨
OPERATIING INSTRUCTIONS Setting The Time, The First Time ® IMPORTANT: The first time you connect your new SmartSet clock radio to the Mains outlet the internal computer will automatically set the time correctly for “GMT” which is the initial default setting. The display will scan for a few seconds and then show the correct Day and Time. Your clock is set correctly and running. If you do not live in the “GMT” Time zone you must change the default zone display ® to your own zone. You only do this
ページ10に含まれる内容の要旨
Date Display To see the correct date at any time, depress the DATE/MONTH button. The display changes from time to Date and Month (DD/MM). st For example, 21 May will appear as “21. 5”. When you release the DATE/MONTH button the display returns to the correct time. Year Display To see the correct year, depress the DATE/MONTH and TIME buttons together. The display changes from time to year. When you release the DATE/MONTH and TIME buttons the display returns to the correct time. British Summer an
ページ11に含まれる内容の要旨
Manual Time Adjustments Some people like to set their clocks 5 to 10 minutes fast to make sure that they will ® always be on time. Even though the SmartSet sets the time by itself, you still have the option of adjusting the time manually if you wish. To manually adjust the time display depress and hold the TIME button, and press either the SET + or – buttons to adjust the time display ahead or back as desired. Each press of the SET + or – buttons will change the display by one minute. If you hol
ページ12に含まれる内容の要旨
Selecting The Alarm Mode ® Your SmartSet clock radio allows you to select from among three different alarm operation modes for either alarm. The alarm modes are: • Everyday – the alarm will turn on all 7 days. • Weekdays only – the alarm will only turn on Monday through Friday; • Weekends only – the alarm will only turn on Saturday and Sunday; To check the Alarm Mode setting for Alarm 1, depress the ALARM 1 setting button. The display will show the Alarm 1 wake up time and the day of the week
ページ13に含まれる内容の要旨
Listening To The Radio 1.) Set the BAND selector to the desired band, AM or FM. 2.) Set the VOLUME control to a low setting. 3.) Press the RADIO ON/OFF button to turn the radio ‘ On’ . The radio dial pointer will light. 4.) Select your desired station with the TUNING control. 5.) Adjust the VOLUME control to the desired setting. 6.) When you are finished listening, press the RADIO ON/OFF button to turn the radio ‘ Off’ . The radio dial pointer light goes off. Antenna Information AM – The AM bar
ページ14に含まれる内容の要旨
Wake To RADIO 1.) Turn the radio ‘ On’ and select the band, station, and volume level that you wish to hear when the alarm comes on, then turn the radio ‘ Off’ again. 2.) Reconfirm the wake up time and alarm mode settings for the alarm you are using, Alarm 1, Alarm 2, or both alarms. 3.) Set the ALARM selector switch for one or both alarms to the “RADIO” position. The appropriate AL 1 and/or AL 2 indicators will light up to confirm that the alarms are set. 4.) At the selected wake up time the ra
ページ15に含まれる内容の要旨
Wake To Buzzer (Crescendo Alarm) NOTE: Alarm 1 and Alarm 2 have different buzzer sounds. •Alarm 1 is a “Single beep” sound. •Alarm 2 is a “Double beep” sound. You will be able to tell which alarm is going off by the sound that it makes. 1.) Reconfirm the wake up time and alarm mode settings for the alarm you are using, Alarm 1, Alarm 2, or both alarms. 2.) Set the ALARM selector switch for one or both alarms to the “BUZZER” position. The appropriate AL 1 and/or AL 2 indicators will light up to
ページ16に含まれる内容の要旨
Snooze Alarm After the radio or buzzer alarm sounds in the morning you may press the SNOOZE/SLEEP OFF Bar for a few more minutes sleep. The corresponding AL indicator will flash. The alarm will stop for approximately 9 minutes and then turn on again. The Snooze operation my be repeated several times if desired but after one hour the alarm will not come on again. Sleep To Music Timer You can program the sleep timer to play the radio for up to 90 minutes and then shut off automatically. 1.) Press
ページ17に含まれる内容の要旨
Changing The Lithium Battery Like all batteries, eventually the built in lithium battery will need to be replaced. A number of factors, such as, the length of time between the date the radio was manufactured and the date you plugged it in for the first time determine the amount of time before replacement. During this initial storage period, the lithium battery is ® supplying power to the SmartSet computer memory. Once you plug the radio in, your household outlet supplies the power, and the batte
ページ18に含まれる内容の要旨
1 4.) Remove the original battery from the holder and insert the new battery into the holder the same way, observing the positive (+) direction. Slide the holder with the new battery back into the slot in the cabinet. 5.) Replace the screw that secures the battery holder in the cabinet. 6.) Turn the radio right side up and confirm that the LOW indicator is ‘ Off’ . 7.) Save these instructions. You’ll have to do this again five to eight years from now! 17 CKS5060_090606.p65 17 6/9/2006, 9:46
ページ19に含まれる内容の要旨
Resetting The Clock After A Total Memory Loss If you do not change the built in lithium battery within a reasonable period of time after you see the ‘ flashing’ LOW warning indicator, the lithium battery may become exhausted and will no longer be able to supply back up power to the ® SmartSet internal computer. If the unit is disconnected from the Mains outlet after ® the battery is exhausted, or if a power interruption occurs, the SmartSet memory will be lost and the clock will need to be rese
ページ20に含まれる内容の要旨
4.) Depress the DATE/MONTH button. The display will change from ‘Time’ to ‘ Date/Month’ (DD/MM). While holding the DATE/MONTH button, press the SET + button to set the display to the correct month and date. The Day indicator will change automatically as you adjust the Date/Month settings. When the correct Date and Month appear on the display, release the buttons. 5.) Depress the TIME button and the SET + button to set the display to the correct time. Be sure to confirm that you have set the time
