ページ1に含まれる内容の要旨
Owner’s Manual
KF-R2.0
Customer Service
(800) 340-0482
Manufactured By:
Keys Fitness Products
4009 Distribution Drive
Suite 250
Garland, TX 75041
CAUTION
Read all precautions and instructions
in this manual before using this equip-
ment.
Model Name : KF-R2.0
Serial Number :
Serial Number can be found at
315-00133
the location specified above.
1
09/18 Rev 11.0
ページ2に含まれる内容の要旨
www.keysfitness.com THANK YOU TABLE OF CONTENTS THANK YOU for making this unit a part of your exercise program. Keys Fitness Table of Contents 2 Products assures the very best in value, appearance, durability and biomechanics. Important Safety Information 3 Assembly 4 This manual will guide you through the assembly process. If at any time you are Parts Identifier 4 having trouble with the assembly or use of this product, then please contact us at Assembly Steps 5 our Keys Fit
ページ3に含まれる内容の要旨
WARNING! Before using this unit or starting any exercise program, consult your physician. This is espe- www.keysfitness.com cially important for persons over the age of 35 and/or persons with pre-existing health prob- lems. The manufacturer or distributor assumes no responsibility for personal injury or prop- erty damage sustained by or through the use of this product. To reduce the risk of electrical shock, burns, fire, or other possible injuries to the user, it is important to review this ma
ページ4に含まれる内容の要旨
Assembly www.keysfitness.com 4
ページ5に含まれる内容の要旨
www.keysfitness.com Front Frame A Rear Main frame B Front stabilizer C Rear stabilizer D Handlebar F G Console Upright post E Back Rest K1 Seat support tube J Seat K2 Prior to assembly, remove components from the box and verify Parts Identifier 5 that all the listed parts were supplied.
ページ6に含まれる内容の要旨
www.keysfitness.com Right Pedal Strap L2 Left Pedal Strap L1 Side Handle bar (Left) H1 Side Handle bar (Right) H2 L - (L) L - (R) Right Pedal Left Pedal Flat Washers M8 x 16 x 1.2T N3 Allen Screws M8x15 Spring Washers M8 N1 N2 Water Bottle Holder Water Bottle M3 M1 Allen Screws (black) Allen Screws M8 Allen Screws M8x20 N5 M8x35 N6 N7 Allen Screws M6x10 N8 1/4"x40L Screw M6x8 N4 Flat Washers (Black) Allen Screws M8x35x2/5 N15 N11 M8x16x1.2T Upright post cover N9 Seat slide adjustment handle
ページ7に含まれる内容の要旨
www.keysfitness.com Use Tool B 6mm 1 N3 N7 N2 ASSEMBLY FOR REAR STABILIZER Secure the rear stabilizer (D) to the rear main frame (B) using 2 allen screws (N7), 2 spring washers (N2) and 2 flat washers (N3). D Note: Front stabilizer (C) is very similar to rear stabilizer (D) but contains transport wheels. Make sure not to get them mixed up. Assembly 7
ページ8に含まれる内容の要旨
www.keysfitness.com Use Tool B 6mm A N1 ASSEMBLY FOR FRONT STABILIZER N2 A10 Secure the front stabilizer (C) to the main N3 frame (A) using 2 allen screws (N7), 2 spring washers (N2) and 2 flat washers (N3) B20 N7 ASSEMBLY FOR FRONT & REAR MAIN FRAME C Step 1: N2 Connect the front (A10) and rear (B20) pulse wires together. N3 Step 2: Attach front (A) and rear (B) main frames together, making sure all wires are lined up correctly so that they are not pinched when assembling the two frames to
ページ9に含まれる内容の要旨
www.keysfitness.com E 3 ASSEMBLY FOR UPRIGHT POST E2 Step 1: Insert the upright post cover (N9) to the upright post (e) E3 A10 from the bottom side. N7 N2 N3 Step 2: Connect the lower pulse wire (A10) with the upper pulse A8 wire (e2). Also, connect the lower sensor wire (A8) with the upper sensor wire (e3). Step 3: A Attach upright tube (e) to the front main frame (A). N9 Then, secure them with 3 allen screws (N7), 3 spring washers (N2) and 3 flat washers (N3). Step 4: Slide the uprigh
ページ10に含まれる内容の要旨
www.keysfitness.com ASSEMBLY FOR UPRIGHT HANDLEBAR Attach the handlebar (F) to the upright post (e) and secure it with 2 allen screws (N5) and 2 flat washers (N11). Use Tool Use Tool 4 15mm F N11 13mm E 6mm N5 ASSEMBLY FOR PEDALS L1 Step 1: Attach left pedal strap (l1) to left pedal L2 (l-l) and right pedal strap (l2) to right (l-R) pedals. Step 2: L-(L) L-(R) Thread the left pedal (l-l) into the pedal L-(L) crankshaft in the counter-clockwise direction. COUNTER- CLOCKWISE Step 3: CLOCK
ページ11に含まれる内容の要旨
www.keysfitness.com G Use Tool 5 E3 ASSEMBLY FOR CONSOLE Step 1: E2 Connect the sensor wire (e3) and the pulse wire (e2) with 6mm the corresponding wires on the console (G). E Step 2: Remove 2 screws (N14) from the back of the console (G). M1 Step 3: Gently push all wires into the upright post and mount the console (G) by sliding it onto the console mounting plate at the top of the upright tube (e). Secure with 2 screws M3 (N14) to keep the console in place. N14 ASSEMBLY FOR WATER BOTTLE M2
ページ12に含まれる内容の要旨
www.keysfitness.com N4 N10 6 H1 ASSEMBLY FOR SEAT SLIDE ADJUSTMENT Insert the seat slide adjustment handle (N10) into the H14 seat slide adjustment collar on the seat slide assembly N8 (B9). Secure it with M6x8 set screw (N4). B19 ASSEMBLY FOR SIDE HANDLEBARS B9 N8 B19 Step 1: Starting with left handlebar (H1), Connect pulse wire (H14) and pulse wire (B19). Step 2: Mount the left handlebar (H1), to the seat H14 slide assembly (B9) and secure with 4 H2 screws (N8). Use Tool Use Tool Ste
ページ13に含まれる内容の要旨
K1 J www.keysfitness.com N15 N3 J 7 ASSEMBLY FOR SEAT SUPPORT FRAME B9 Attach the seat support frame (J) to the seat slide assembly (B9) and secure it using 3 screws (N15) and 3 flat washers (N3). K2 N6 Use Tool 5mm Assembly 13 N3 N1
ページ14に含まれる内容の要旨
K1 J N15 N3 J B9 www.keysfitness.com K2 N6 8 ASSEMBLY FOR SEAT CUSHION Attach seat (K2) to the seat support frame (J) using 4 allen screws (N1) and 4 flat washers (N3). Use Tool N3 N1 6mm 14 Assembly
ページ15に含まれる内容の要旨
www.keysfitness.com K1 Use Tool J N15 N3 5mm 9 J ASSEMBLY FOR BACK REST B9 Attach the back rest (K1) to the seat support tube (J) and secure it using 4 screws (N6). K2 N6 Assembly 15 N3 N1
ページ16に含まれる内容の要旨
www.keysfitness.com AC ADAPTOR PLUG-IN LOCATION Congratulations! You have completed the assembly of your new Keys Fitness R2.0 Recumbent Bike! Adapter (O) ADJUSTING YOUR SEAT TRANSPORTING YOUR UNIT PULL UP (LOCK) PULL DOWN (RELEASE) TRANSPORT WHEELS 16 Assembly
ページ17に含まれる内容の要旨
Console Information www.keysfitness.com 17
ページ18に含まれる内容の要旨
www.keysfitness.com DISPLAY: 1) Program Selection Manual, Program (presets), and Watt 2) Segment Program Profile Rows signify tension level, whereas columns signify interval of time 1 3) Time 13 4) Speed 2 5) One touch program profile buttons 12 6) Start / Stop Key 4 3 11 7) Recovery Key Evaluates overall fitness level 8) Up (+) and Down (-) Keys 9) Reset Key Resets function values to default CAUTION: • Before starting any exercise 5 program, consult your physician. • For
ページ19に含まれる内容の要旨
www.keysfitness.com CONSOLE FUNCTION PARAMETERS TIME 0:00~99:59. WATTS 0~999 WATTS CALORIES 0~9999 TEMPERATURE 0~60ºC / 32~99ºF GENDER FEMALE / MALE AGE 10-25-99 HEIGHT 100-200 (CM) / 40-80 (INCH) PULSE P~30~240 HEART SYMBOL ON / OFF blinks PROGRAM P1~P12 WATT CONSTANT 10~350 WATTS PERSONAL U1~U4 WEIGHT 20-150 (KG) / 40-350 (LB) CONSOLE BUTTONS: START/STOP: This button is used to start or stop training RECOVERY: This button is used to begin the Recovery feature of the console (refer to Console F
ページ20に含まれる内容の要旨
www.keysfitness.com CONSOLE FUNCTIONS: TIME: If a target time was not selected, time will count up from 00:00 to maximum 99:59. When working out with a target time, time will count down from target to 00:00. When selecting target time, use the +/- buttons, the time will change in 1 minute increments and can range from 1:00 min to 99:00 mins. o nce target is accomplished, window will flash to signify the end of workout. You may press start button twice to continue. SPEED: Displays current t
