ページ1に含まれる内容の要旨
NOTE:
Please read all instructions
carefully before using this
product
Safety Notice
MARCY WEIGHT BENCH
Hardware Identifier
MWB 758
Assembly Instruction
Parts List
Warranty
Ordering Parts
Model
MWB 758
Retain This
Manual for
Reference
07-12-01
OWNER'S
IMPEX FITNESS PRODUCTS
14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746
MANUAL
Tel: (800) 999-8899 Fax: (626) 961-9966
www.impex-fitness.com
info@impex-fitness.com
ページ2に含まれる内容の要旨
TABLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICES..................................................................... 2 HARDWARE IDENTIFIER.....…....................................................................... 3 ASSEMBLY INSTRUCTIONS........................................................................... 4 EXPLODED DIAGRAM……………………………………………………………... 8 PARTS LIST………………………………
ページ3に含まれる内容の要旨
IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions: 1. Keep children and pets away from the machine at all times. DO NOT leave children unattended in the same room with the machine. 2. Only one perso
ページ4に含まれる内容の要旨
3
ページ5に含まれる内容の要旨
ASSEMBLY INSTRUCTION Tools Required to Assemble the Machine: Two Adjustable Wrenches and Allen Wrenches. NOTE: It is strongly recommended this machine to be assembled by two or more people to avoid possible injury. STEP 1 (See Diagram 1) A.) Connect the Left and Right Upright Beams (#1) & (#2) by a Cross Brace (#4) in the mid- span. Align the holes and secure them with one Bracket (#23), two M10 x 3 1/8” Carriage Bolts (#39), two ∅ ¾” Washers (#50), and M10 Aircraft Nuts (#49)
ページ6に含まれる内容の要旨
STEP 2 (See Diagram 2) A.) Attach the back of Main Seat Support (#3) to the Cross Brace (#4). Secure it with one Bracket (#23), two M10 x 2 ¾” Carriage Bolts (#41), two ∅ ¾” Washers (#50), and M10 Aircraft Nuts (#49). B.) Attach the Front Stabilizer (#6) to the front of the Main Seat Support (#3). Secure it with two M10 x 1” Carriage Bolts (#40), ∅ ¾” Washers (#50), and M10 Aircraft Nuts (#49). DIAGRAM 2 5
ページ7に含まれる内容の要旨
STEP 3 (See Diagram 3) A.) Attach the Leg Developer (#5) to the bracket on the Front Stabilizer (#6). Secure it with an Axle (#43), two ∅ 5/8” Washers (#51), and M8 x 5/8” Allen Bolts (#44). B.) Attach the Handle Bracket (#10) to the Leg Developer (#5). Secure it with a 2 ¾” L- shaped Pin (#21) and a Spring Clip (#48). Slide the Handle Tube (#17) onto the Handle Bracket. Push two Handle Grips (#28) onto the Handle Tube (#17) from both ends. C.) Insert one Foam Roll Tube (#16) hal
ページ8に含まれる内容の要旨
STEP 4 (See Diagram 4) A.) Attach the Seat Bracket (#18) to the short pivot on the Main Seat Support (#3). Secure it with a M10 x 4 ¾” Allen Bolt (#42) and M10 Aircraft Nut (#49). Attach the Seat Support Bar (#9) to the pivot on the Seat Bracket (#18). Secure it with a M10 x 4 ¾” Allen Bolt (#42) and M10 Aircraft Nut (#49). Insert the Seat Support Bar (#9) into the opening on the Main Seat Support (#3). Insert a 4” L-shaped Pin (#22) through the holes to obtain the desired incline of the
ページ9に含まれる内容の要旨
8
ページ10に含まれる内容の要旨
PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Left Upright Beam 1 2 Right Upright Beam 1 3 Main Seat Support 1 4 Cross Brace 1 5 Leg Developer 1 6 Front Stabilizer 1 7 Crutch 2 8 Arm Curl Stand 1 9 Seat Support Bar 1 10 Handle Bracket 1 11 Olympic Sleeve 1 12 Backrest Adjustment Bar 1 13 Backrest Incline Bar 1 14 Weight Plate Holder 2 15 Backrest Support 2 16 Foam Tube 3 17 Handle Tube 1 18 Seat Bracket 1 19 Sleeve 2 20 Rubber Bumper 2 21 2 ¾” L-shaped Pin 1 22 4” L-sh
ページ11に含まれる内容の要旨
IMPEX INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IMPEX's obligation under this Warranty is limited to replacing or repairing, at IMPEX's option. All returns must be pre-authorized by IMPEX. Pre-authorization may be obtained by calling IMPEX Cus
