ページ1に含まれる内容の要旨
NOTE:
Please read all instructions
carefully before using this
product
Safety Notice
IGS-03
Hardware Identifier
45° ° ° ° HYPER EXTENSION
Assembly Instruction
BENCH
Parts List
Warranty
Ordering Parts
Model
IGS-03
Retain This
Manual for
Reference
02-19-02
OWNER'S
MANUAL
IMPEX FITNESS PRODUCTS
14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746
Tel: (800) 999-8899 Fax: (626) 961-9966
www.impex-fitness.com
info@impex-fitne
ページ2に含まれる内容の要旨
TABLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICES..................................................................... 2 HARDWARE IDENTIFIER.....…....................................................................... 3 ASSEMBLY INSTRUCTIONS........................................................................... 4 EXPLODED DIAGRAM……………………………………………………………... 7 PARTS LIST……………………………………
ページ3に含まれる内容の要旨
IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions: 1. Keep children and pets away from the machine at all times. DO NOT leave children unattended in the same room with the machine. 2. Only one perso
ページ4に含まれる内容の要旨
3
ページ5に含まれる内容の要旨
ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Adjustable Wrench and Allen Wrench NOTE: It is strongly recommended this machine to be assembled by two or more people to avoid possible injury. STEP 1 (See Diagram 1) A.) Attach the Main Frame (#1) to the Rear Stabilizer (#5). Secure it with two M10 x 3 ½” Carriage Bolts (#6), ∅ ¾” Washers (#3) and M10 Aircraft Nuts (#2). B.) Attach the Main Frame (#1) to the Front Stabilizer (#32). Secure it with two M10 x 3 ½” Ca
ページ6に含まれる内容の要旨
STEP 2 (See Diagram 2) A.) Attach two Brass Bushings (#8) to the Support Frame (#9). Secure it to the rear bracket on the Main Frame (#1) with one M10 x 3 ½” Allen Bolt (#33), two ∅ ¾” Washers (#3), and one M10 Aircraft Nut (#2). Do not over tighten the bolt. B.) Insert the Hyper Adjustment Frame (#12) into the Support Frame (#9). Insert a Lock Knob (#10) into the selected hole to lock it and obtain the desired height. C.) Attach two Brass Bushings (#8) to the Akimbo Frame (#14). Sec
ページ7に含まれる内容の要旨
STEP 3 (See Diagram 3) A.) Attach the two Upholstery Pads (#20) to the Handle Adjustment Frame (#16). Secure each pad with two M8 x 1 ½” Allen Bolts (#18) and ∅ ½” Washers (#17). B.) Attach the Foot Plate (#26) to the Akimbo Frame (#14). Securely tighten it with two M10 x 1 3/4” Allen Bolts (#25), ∅ ¾” Washers (#3), and M10 Aircraft Nuts (#2). C.) Insert one Foam Tube (#23) halfway through the hole on the Foot Adjustment Frame (#24). Insert one Foam Tube halfway through the hole on th
ページ8に含まれる内容の要旨
7
ページ9に含まれる内容の要旨
PARTS LIST KEY NO. DESCRIPTION Q’ty 1 Main Frame 1 2 M10 Aircraft Nut 9 3 ∅ ¾” Washer 14 4 2” x 2 ¾” End Cap 4 5 Rear Stabilizer 1 6 M10 x 3 ½” Carriage Bolt 4 7 2” Square End Cap 2 8 Brass Bushing 6 9 Support Frame 1 10 Lock Knob 3 11 Sleeve 3 12 Backrest Adjustment Frame 1 13 M10 x 3 3/8” Allen Bolt 1 14 Akimbo Frame 1 15 Handle Grip 2 16 Handle Adjustment Frame 1 17 ∅ ½” Washer 8 18 M8 x 1 1/8” Allen Bolt 4 19 1 ¾” Square End Cap 3 20 Upholstery Pad 2 21 ∅ 1” F
ページ10に含まれる内容の要旨
IRON GRIP SPORT By IMPEX FITNESS PRODUCTS LIMITED LIFE TIME WARRANTY IMPEX FITNESS PRODUCTS ("IMPEX") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of LIFE TIME on the Frame and Weld, 3 YEARS on parts, and 6 MONTHS on upholstery from the date of purchase. This warranty extends only to the original purchaser. IMPEX's obligation under this Warranty is limited to replacing or repairing, at IMPEX's opti
