ページ1に含まれる内容の要旨
NOTE:
Please read all instructions
carefully before using this
product
APEX
POWER TOWER
Safety Notice
TC-2210
Hardware Identifier
Assembly Instruction
Parts List
Warranty
Ordering Parts
Model
TC-2210
Retain This
Manual for
Reference
4-14-08
OWNER'S
MANUAL
IMPEX INC.
14777 DON JULIAN RD., CITY OF INDUSTRY, CA 91746
Tel: (800) 999-8899 Fax: (626) 961-9966
www.impex-fitness.com
info@impex-fitness.com
ページ2に含まれる内容の要旨
TABLE OF CONTENTS BEFORE YOU BEGIN...................................................................................... 1 IMPORTANT SAFETY NOTICES..................................................................... 2 HARDWARE IDENTIFIER.....…....................................................................... 4 ASSEMBLY INSTRUCTIONS........................................................................... 5 EXPLODED DIAGRAM……………………………………………………………… 9 PARTS LIST.............
ページ3に含まれる内容の要旨
IMPORTANT SAFETY NOTICE PRECAUTIONS This exercise machine is built for optimum safety. However, certain precautions apply whenever you operate a piece of exercise equipment. Be sure to read the entire manual before you assemble or operate your machine. In particular, note the following safety precautions: 1. Keep children and pets away from the machine at all times. DO NOT leave children unattended in the same room with the machine. 2. Only one person
ページ4に含まれる内容の要旨
WARNING LABEL REPLACEMENT The Warning Label shown here has been placed on the Base Frame. If the label is missing or illegible, please call customer service at 1-800-999-8899 for replacement. Apply the label in location shown. 3
ページ5に含まれる内容の要旨
HARDWARE PACK 4
ページ6に含まれる内容の要旨
ASSEMBLY INSTRUCTION Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen Wrenches NOTE: It is strongly recommended two or more people assembling this machine to avoid possible injury. STEP 1 (See Diagram 1) A.) Connect the Left and Right Base Frame (#1 & #2) with the Stabilizer (#3) in the mid-span. Secure each end with two M10 x 2 ¾” Carriage Bolts (#19), ∅ ¾” Washers (#17), and M10 Aircraft Nuts (#18). Do NOT tighten the Nuts and Bolts yet. B.) Attach a Lo
ページ7に含まれる内容の要旨
STEP 2 (See Diagram 2) A.) Attach a Diagonal Support (#4) to the Lower Upright Beam (#5) and the Right Base Frame (#2). Secure it to the Lower Upright Beam with two M10 x 3” Carriage Bolts (#20), Ø 1 ¼” Bent Washers (#22), and M10 Aircraft Nuts (#18). Secure it to the Right Base Frame with two M10 x 2 ¾” Carriage Bolts (#19), one 4 ¾” Bracket (#13), two Ø ¾” Washers (#17), and two M10 Aircraft Nuts (#18). B.) Attach a Dip Support (#9) to the Lower Upright Beam. Align the hole
ページ8に含まれる内容の要旨
DIAGRAM 2 7
ページ9に含まれる内容の要旨
STEP 3 (See Diagram 3) A.) Attach the Chin-up Bar (#10) to the top opening on the two Upper Upright Beams. Secure the Chin-up Bar to each opening with one M8 x 1 5/8” Allen Bolt (#27) and Ø ½” Bent Washer (#34). Cover each opening with an Upright Beam End Cap (#30). B.) Attach the two Arm Pads (#15) onto the Dip Supports. Secure each Arm Pad with two M8 x 2 ½” Allen Bolts (#16) and Ø 5/8” Bent Washers (#26). C.) Attach the Backrest Board (#14) to the Cross Brace (#7). Secure it with t
ページ10に含まれる内容の要旨
EXPLODED DIAGRAM 9
ページ11に含まれる内容の要旨
Parts list KEY NO. DESCRIPTION Q’ty 1 Left Base Frame 1 2 Right Base Frame 1 3 Stabilizer 1 4 Diagonal Support 2 5 Lower Upright Beam 2 6 Upper Upright Beam 2 7 Cross Brace 1 8 Vertical Handle 2 9 Dip Support 2 10 Chin-up Bar 1 11 Curve Bracket 2 12 5 ½” Bracket 2 13 4 ¾” Bracket 2 14 Backrest Board 1 15 Arm Pad 2 16 M8 x 2 ½” Allen Bolt 4 17 Ø ¾” Washer 12 18 M10 Aircraft Nut 24 19 M10 x 2 ¾” Carriage Bolt 12 20 M10 x 3” Carriage Bolt 8 21 M10 x 3 1/8” Carriage
ページ12に含まれる内容の要旨
IMPEX INC. LIMITED WARRANTY IMPEX Inc. ("IMPEX") warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of two years on the Frame from the date of purchase. This warranty extends only to the original purchaser. IMPEX's obligation under this Warranty is limited to replacing or repairing, at IMPEX's option. All returns must be pre-authorized by IMPEX. Pre-authorization may be obtained by calling IMPEX Custo
