ページ1に含まれる内容の要旨
Solar InSect kIller
wIth lIght
Model 95500
aSSeMbly & operatIng InStructIonS
Due to continuing improvements, actual product may differ slightly from the product described herein.
®
3491 Mission Oaks Blvd., Camarillo, CA 93011
Visit our website at: http://www.harborfreight.com
t o preVent SerIouS Injury, read and underStand
all warnIngS and InStructIonS before uSe.
© ®
Copyright 2006 by Harbor Freight Tools . All rights reserved. No portion of this
manual or any artwork contained
ページ2に含まれる内容の要旨
SpecIfIcatIonS Overall Dimensions 5-7/8” L x 5-7/8” W x 6-1/8” H Solar Panel Dimension 2.62” L x 2.62” W Polycrystalline Solar Panel 60 mA - 0.24 W Batteries 600 mA AA NiCd Batteries - Qty. 2 - (included) Single LED Light (1 White LED) LED Lights-2 Modes Pest Attracting Light (2 Ultraviolet LED) Running Time 8 Hours on Fully Charged Batteries Net Weight 0.8 lb. Save this Manual You will need this manual for the safety warnings and precautions, assembly, oper- ating, inspection, maintenance and
ページ3に含まれる内容の要旨
7. people with pacemakers should consult their physician (s) before using this product. Electromagnetic fields in close proximity to a heart pacemaker could cause interference to or failure of the pacemaker. unpackIng When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at the number shown on the cover of this manual as soon as possible. aSSeMbly InStructIonS note: For additional information regarding
ページ4に含まれる内容の要旨
Solar Panel (2) Figure 1 3. you need to flip the Switch to off (8) and charge the Solar Insect killer with light when using it for the first time. Charge time for the Solar Panel (2) is at least 2-3 days. After this, it will last eight hours without sunlight. Turn OFF the light during daylight. note: The Solar Insect Killer with Light can also be charged with an AC/DC adapter, 4.5V/250mA (not included). note: There are three positions on the Switch (8). ON, OFF & Ultraviolet Light (that att
ページ5に含まれる内容の要旨
Hook (1) Lantern Style Ground Stake (17, 18, 19, 20) Figure 3 5. Place the lantern assembly on the top of the Ground Stake (17,18,19, 20). Be sure it is connected firmly. Turn the Switch (8) ON. replacIng the batterIeS note: If the light stops working after being used for a period of time, it may mean the bat- tery is beyond its lifespan. 1. Remove the Light from the Stake. From the underside of the Light, remove the cage to access the batteries. Twist the cage counterclockwise and lift off
ページ6に含まれる内容の要旨
Transparent Inner Hood Assembly (12) Batteries (11) Battery Case (9) Figure 5 3. Replace the dead batteries with identical AA NiCd Rechargeable Batteries (11). Be sure to follow the polarity signs inside of the Battery Case (9). 4. Reverse these steps and reassembly the Solar Insect Killer with Light. Tighten the screws and replace the cage, turning clockwise. Connect assembly to the Stake. Turn the Switch to ON. If it does not light, check to polarity of the batteries again or place the
ページ7に含まれる内容の要旨
partS lISt part description Q’ty part description Q’ty 1 Hook 1 11 Battery 2 2 Solar Panel 1 12 Electric Grid 1 3 Top Cover 1 13 Screw 2 4 Circuit Board 1 14 Reflect Ring 1 15 Reflect Board 1 1 White 5 LED 2 Ultraviolet 16 Outer Hood 1 6 Control Circuit Board 1 17 Upper Shaft 1 7 Recharge Socket 1 18 Connector 1 8 Switch 1 19 Lower Shaft 1 9 Battery Case 1 20 Ground Stake 1 10 Screw 4 pleaSe read the followIng carefully THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEM-
ページ8に含まれる内容の要旨
aSSeMbly dIagraM Solar Panel (2) Main Body Ultraviolet LED White LED Electric Grid Stake (17, 18, 19, 20) 1 6 2 7 8 5 3 4 9 11 13 10 12 14 15 17 18 16 19 20 record product’s Serial number here: note: If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. SKU 95500 for technical questions, please call 1-800-444-3353. Page 8
