ページ1に含まれる内容の要旨
MODEL T10687
TRACK SAW
OWNER'S MANUAL
(For models manufactured since 10/12)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
ページ2に含まれる内容の要旨
This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death. The owner of this machine/tool is solely responsible for its safe use. This responsibility includes but is not limited to
ページ3に含まれる内容の要旨
Table of Contents INTRODUCTION ............................................................................................................................... 2 SECTION 1: SAFETY ....................................................................................................................... 8 SECTION 2: POWER SUPPLY ...................................................................................................... 12 SECTION 3: SET
ページ4に含まれる内容の要旨
INTRODUCTION Manual Accuracy Contact Info your tool may not exactly match the manual www.grizzly.com No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other machinery
ページ5に含まれる内容の要旨
Glossary Of Terms VERY Arbor: Perpendicular: Riving knife: Bevel Edge Cut: Straightedge: Blade Guard: Through Cut: Kerf: Rip Cut: Kickback: Plunge Cut: Parallel:
ページ6に含まれる内容の要旨
Features and Controls A. Primary Handle: E. Rail Adjustment Knobs: B. Secondary Handle: F. Zero-Stop Set Screw: ON/OFF G. ON/OFF Trigger: C. Depth Stop & Lock Knob: H. Plunge Release: D. Bevel Gauge & Lock Knob (Front & Rear):
ページ7に含まれる内容の要旨
I. Dust Collection Port: M. Base Plate: J. Arbor Bolt: N. Blade Lock: K. Spring-Loaded Riving Knife: O. Cutting Indicator Arrows: L. Saw Blade:
ページ8に含まれる内容の要旨
MODEL T10687 TRACK SAW Product Dimensions: Shipping Dimensions: Electrical: Motor: Main Specifications: Blade Specifications Cutting Capacities Construction
ページ9に含まれる内容の要旨
Other Specifications: Features: Optional Accessories:
ページ10に含まれる内容の要旨
SECTION 1: SAFETY For Your Own Safety, Read Instruction Manual Before Operating this Power Tool The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of impor- tance of the safety messages. The progression of symbols is described below. Remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures. Alw
ページ11に含まれる内容の要旨
WEARING PROPER APPAREL. CHILDREN & BYSTANDERS. FORCING TOOLS. HAZARDOUS DUST. USE RECOMMENDED ACCESSORIES. MAINTAIN WITH CARE. HEARING PROTECTION. REMOVE ADJUSTING TOOLS. CHECK DAMAGED PARTS. INTENDED USAGE. MAINTAIN POWER CORDS. AW
ページ12に含まれる内容の要旨
Additional Safety for Circular Saws MAIN INJURY HAZARDS: Death, amputation, or lacerations from contacting the spinning saw blade; blindness or eye injury from flying workpiece chips or tramp metals. To minimize your risk of these hazards, always heed the following warning information: BLADE MAINTENANCE. STOPPING AND RESTARTING CUTS. RECOMMENDED ACCESSORIES. CUTTING CORRECT MATERIAL. RIVING KNIFE. PLUNGE CUTS. GUA
ページ13に含まれる内容の要旨
Understanding Kickback Figures 1–2 Figure 1. Preventing Kickback Take these precautions to help prevent the most common causes of kickback: Figure 2.
ページ14に含まれる内容の要旨
SECTION 2: POWER SUPPLY Availability Serious injury could occur if you connect the machine to power before completing the setup process. DO NOT connect to power until instructed later in this manual. 120V Circuit Requirements V oltage ........................................................ 1 20V Cycle ..........................................................60 Hz Electrocution, fire, or Phase ........................................... Single-Ph
ページ15に含まれる内容の要旨
Polarized Plug Extension Cords 5-15 Receptacle 1-15 Plug 25 Feet ....................................................16AWG 50 Feet ....................................................14AWG 100 Feet ..................................................12AWG Over 100 Feet .................... Not Recommended Figure 3.
ページ16に含まれる内容の要旨
SECTION 3: SETUP Unpacking Included Inventory T10687 Included Inventory (Figures 4) A. B. C. Figure 4. SUFFOCATION HAZARD! Keep children and pets away from plastic bags or packing Optional materials shipped with this Accessories machine. Discard immediately. NOTICE If you cannot find an item on this list, care- fully check the machine and the packaging T
ページ17に含まれる内容の要旨
T25094—Accessories Pack for T24872 Rail Dust Collection A. B. C. D. This machine creates substantial amounts of dust during operation. Breathing air- borne dust on a regular basis can result in permanent respiratory illness. Reduce your risk by wearing a respirator and capturing the dust with a dust collection system. Recommended CFM at Dust Port: 100 CFM Do not confuse this CFM recommendation with the rating of the dust collector. To determine the CFM at the du
ページ18に含まれる内容の要旨
SECTION 4: OPERATIONS Changing Blades Using the Saw Severe lacerations, amputation, or death can occur if blade changing/adjustment is attempted while saw is connected to power. Always unplug saw before changing or mak- ing any adjustments to blade or riving knife, or performing any maintenance to the saw that would require direct physical contact Blade Selection with the blade.
ページ19に含まれる内容の要旨
6. Even worn saw blades can be extremely sharp and dangerous to handle. To avoid Figure 11 injury, wear protective gloves when han- dling circular blades. 3. Figure 10 Figure 11. 7. Figure 10. 4. 5.
ページ20に含まれる内容の要旨
2. Riving Knife Figure 13 Adjustment Figure 13. To adjust the riving knife: 3. 1. Figure 12 4. 5. Figure 12.
