ページ1に含まれる内容の要旨
model h0770
5-shelf cart
instructions
t he Model h 0770 features light weight, but strong
wooden shelves for moving a multitude of prod-
a
ucts.
specifications
B C
Weight .....................................................131 lbs.
l oad Capacity .........................................550 lbs.
1
d imensions ....................... 22 ⁄2"W x 39"l x 66" h
t op s helf h eight .............................................62"
C C
1
d istance Between s helves.......................... 10 ⁄4"
1
s h
ページ2に含まれる内容の要旨
5. place the handles into the sockets at both recommended tools ends of the bottom shelf. Make sure the Wrench/socket 10mm ....................................... 1 horizontal supports face inward, as shown in Wrench/socket 17mm ........................................ 1 figure 5. h ammer ............................................................. 1 Wood Block ....................................................... 1 Clamp ................................................................ 1
ページ3に含まれる内容の要旨
7. slide each center shelf onto a pair of hori- 8. repeat step 7 to install the top shelf (see zontal supports, align the mounting holes in figure 9). the shelves and supports, then fasten with M6-1 x 25 carriage bolts, flat washers, lock washers, and hex nuts, as shown in figure 7. Finger tighten bolts for now. x 4 x 4 x 12 figure 9. top shelf installed. 9. tighten the hex bolts that fasten the bottom shelf to the handles, then final tighten all fas- figure 7. Center shelves installed. ten
ページ4に含まれる内容の要旨
h0770 parts breakdown and list REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PH0770001 SHELF 9 PH0770009 HEX NUT M10-1.5 (LH) 2 PH0770002 HANDLE 10 PH0770010 BOTTOM SHELF 3 PB27M HEX BOLT M12-1.75 X 30 11 PW06M FLAT WASHER 12MM 4 PH0770004 FIXED WHEEL 6" 12 PCB27M CARRIAGE BOLT M6-1 X 25 5 PH0770005 SWIVEL WHEEL 6" 13 PN01M HEX NUT M6-1 6 PB74M HEX BOLT M10-1.5 X 20 14 PW03M FLAT WASHER 6MM 7 PW04M FLAT WASHER 10MM 15 PLW03M LOCK WASHER 6MM 8 PLW06M LOCK WASHER 10MM -4- h 07
