ページ1に含まれる内容の要旨
MODEL H8175
PROFESSIONAL
PNEUMATIC GLUE GUN
INSTRUCTION SHEET
Case
EYE/SKIN BURN HAZARD!
Wear safety glasses and
protective clothing when
using this tool!
INJURY HAZARD!
Air
Always disconnect tool from
Regulator
air to prevent unexpected
Gun
operation during service!
DO NOT EXCEED 100 PSI!
Personal injury could
Screwdriver
occur.
Extra Nozzles
ELECTRICITY HAZARD!
Figure 1. Model H8175.
Electrocution or fire could
result if this tool is not
1
properly grounded. Do not
4. Insert a ⁄2" d
ページ2に含まれる内容の要旨
The mounting bracket can be swiveled around Air Supply to four different mounting locations on the air The glue gun Mu ST be regularly lubricated with regulator. To adjust the mounting bracket position, 3-4 drops of air tool oil directly into the air fitting loosen the retaining ring and rotate the mounting before each use, as shown in Figure 2. bracket until the small tab fits into one of the four mounting slots (see Figure 4). Tighten the retain- ing ring and securely mount the air regu
ページ3に含まれる内容の要旨
Changing Nozzles Temperature Adjustment The Model H8175 glue gun comes with three noz- The Model H8175 glue gun temperature can be zles for different gluing applications and output adjusted from 284°F–428°F. amounts. The all metal nozzle is for heavy duty and high output applications. The long tip of the To adjust the glue gun temperature: silicon nozzle is ideal for bonding items with mini- mal accessibility. The silicon coating reduces the 1. using the screwdriver, adjust the tempera- risk o
ページ4に含まれる内容の要旨
H8175 Parts Breakdown and List REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PH8175001 GUN BODY 21 PH8175021 CABLE TIE 2 PH8175002 SPACER 22 PH8175022 SCREW 3 PH8175003 TEMPERATURE CONTROL 23 PH8175023 WASHER 4 PH8175004 GRIZZLY NAME PLATE 24 PH8175024 HEATING ASSEMBLY 5 PH8175005 RUBBER INLET RING 25 PH8175025 POWER SWITCH ASSEMBLY 6 PH8175006 FLUID CONTROL KNOB 26 PH8175026 POWER CORD 7 PH8175007 FLUID ADJUST NUT 27 PH8175027 FUSE ASSEMBLY 8 PH8175008
