Grizzly H8000の取扱説明書

ページ1に含まれる内容の要旨

Certification Using Extensions Typical Fastener Torque Settings
Before shipment, this torque wrench was calibrated Depending on the type of extensions used, you may The charts below offer average torque recommen-
to an accuracy of +/- 4% in the clockwise direction. need compensate for added leverage by using a dations for different fastener sizes. Exact torque
lower torque setting to reach the true torque setting settings are defined by fastener material type and
applied to the fastener. plati

ページ2に含まれる内容の要旨

Introduction Operation Tips Torque Wrench Care ������������������������� Use this wrench to tighten fasteners (nuts, bolts, etc.) to • Hold the torque wrench only by the center of the • Avoid cheater bars or extension pipes. Using these ������������������������� specific torque settings. handle when tightening fasteners. Try to keep your items on the back of the torque wrench, or using the forearm perpendicular to the wrench when applying torque wrench as a breaker bar or pry bar, will ruin D