Grizzly Air Palm Sander g5344の取扱説明書

ページ1に含まれる内容の要旨

MODEL G5344
AIR PALM SANDER
INSTRUCTION SHEET
Assembly and Attaching Abrasives
To assemble the sander and attach sandpa-
per:
EYE INJURY HAZARD!
Always wear safety glasses
1. Thread the air hose into the sander.
when using this tool to
prevent serious personal
1
2. Install a ⁄4" NPT male quick-disconnect fitting
injury.
(not included) into the end of the hose.
INJURY HAZARD!
Always disconnect tool from
3. Lift one clamp up over the bracket (Figure 2),
air to prevent unexpected
then pull

ページ2に含まれる内容の要旨

5. Repeat Step 3 with the opposite clamp, fold 4. Pull the throttle valve outwards to stop the the sandpaper over the sander, and repeat sander. Step 4, making sure the paper fits snugly as shown in Figure 4. 5. When the sandpaper loses its effectiveness, disconnect the sander from air, remove sandpaper from the clamps, and replace with a new sheet. Maintenance Lubricate at the beginning of the sanding task. Place one or two drops of pneumatic tool oil directly into the air fitting as s

ページ3に含まれる内容の要旨

G5344 Parts Breakdown and List � � � � � � � � �� �� �� �� �� � �� �� �� �� �� �� �� �� �� �� �� �� �� �� � �� � REF PART # DESCRIPTION REF PART # DESCRIPTION 1 PS07M PHLP HD SCR M4-.7 X 8 14 P5344014 CYLINDER 2 PLW02M LOCK WASHER 4MM 15 P5344015 STEEL BALL 3 P5344003 HOUSING COVER 16 P5344016 CLAMP SPRING 4 P5344004 RUBBER SUPPORT ASSEMBLY 17 P5344017 FLAT HEAD SCREW 5 P5344005 TUBE ASSEMBLY 18 P5344018 CYLINDER SUB ASSEMBLY 6 P5344006 MODEL LABEL 19 PFH49M FLAT HD SCR M3-.5 X 6 7 P5344007 RUBB

ページ4に含まれる内容の要旨