ページ1に含まれる内容の要旨
Grizzly 52
Tree Cutter
Published 01/05 Part No. 02975192C
OPERATOR'S MANUAL
This Operator's Manual is an integral part of the safe operation
of this machine and must be maintained with the unit at all
times. READ, UNDERSTAND, and FOLLOW the Safety and
Operation Instructions contained in this manual
ALAMO INDUSTRIAL
1502 E. Walnut
Seguin, Texas 78155
830-372-3551
$0.00
© 2005 Alamo Group Inc.
ページ2に含まれる内容の要旨
TO THE OWNER/OPERATOR/DEALER All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has designed this implement to be used with all its safety equipment properly attached to minimize the chance of accidents. BEFORE YOU START!! Read the safety messages on the implement and shown in your manual. Observe the rules of safety and common sens
ページ3に含まれる内容の要旨
BE SAFE! BE ALERT! BE ALIVE! BE TRAINED before operating the Mower! Safety Training Makes the Difference In order to reduce accidents and enhance the safe operation of mowers, Alamo Industrial, in cooperation with other industry manufacturers has developed the AEM/FEMA Industrial and Agricultural Mower Safety Practices video and guide book. The video will familiarize and instruct mower-tractor operators in safe practices when using industrial and agricultural mowing equipment. It i
ページ4に含まれる内容の要旨
Alamo Industrial is willing to provide one (1) AEM Mower Safety Practices Video Please Send Me: VHS Format – AEM/FEMA Mower Operator Safety Video DVD Format – AEM/FEMA Mower Operator Safety Video Mower Operator’s Manual AEM Mower Operator’s Safety Manual Requester Name: Phone: Requester Address: City State Zip Code Mower Model: Serial Number: Date Purchased: Dealer Salesperson: Dealership Name: Dealership Location: Mail to: AEM Video Services
ページ5に含まれる内容の要旨
TABLE OF CONTENTS SAFETY SECTION ...................................................................................................................................... 1-1 Safety Information .............................................................................................................................1-2 Work Area Preparation .....................................................................................................................1-9 Decal Location ......................
ページ6に含まれる内容の要旨
ページ7に含まれる内容の要旨
SAFETY SECTION Safety Section 1-1
ページ8に含まれる内容の要旨
SAFETY A safe and careful operator is the best operator. Safety is of primary importance to the manufac- turer and should be to the owner/operator. Most accidents can be avoided by being aware of your equipment, your surroundings, and observing certain precautions. The first section of this manual includes a list of Safety Messages that, if followed, will help protect the operator and bystanders from injury or death. Read and understand these Safety Messages before assem- bling, operat
ページ9に含まれる内容の要旨
SAFETY Si no lee Ingles, pida ayuda a alguien que PELIGRO! ¡LEA EL si lo lea para que le traduzca las medidas INSTRUCTIVO! de seguridad. (SG-3) Never operate the Tractor or Implement until you have read and DANGER! completely understand this Manual, the Tractor Operator’s Manual, and each of the Safety Messages found in the Manual or on the Tractor and Implement. Learn how to stop the tractor engine suddenly in an emergency. Never allow inexperienced or untrained personnel too operate the Tr
ページ10に含まれる内容の要旨
SAFETY DANGER! Never allow children or other persons to ride on the Tractor or Implement. Falling off can result in serious injury or death. (SG-10) DANGER! Never allow children to operate or ride on the Tractor or Implement. (SGM-11) WARNING! Do not mount the Tractor while the tractor is moving. Mount the Tractor only when the Tractor and all moving parts are completely stopped. (SG-12) DANGER! Start tractor only when properly seated in th
ページ11に含まれる内容の要旨
SAFETY WARNING! Transport only at safe speeds. Serious accidents and injuries can result from operating this equipment at unsafe speeds. Understand the Tractor and Implement and how it handles before transporting on streets and highways. Make sure the Tractor steering and brakes are in good condi- tion and operate properly. Before transporting the Tractor and Implement, determine the safe transport speeds for you and the equipment. Make sure you abide by the following rules: Test the trac
ページ12に含まれる内容の要旨
SAFETY KEEP AWAY FROM ROTATING ELEMENTS to prevent entanglement DANGER! and possible serious injury or death. (SG-24) DANGER! Never allow children to play on or around Tractor or Implement. Children can slip or fall off the Equipment and be injured or killed. Children can cause the Implement to shift or fall crushing themselves or others. (SG-25) DANGER! NEVER use drugs or alcohol immediately before or while operating the Tractor and Implement. Drugs and alcohol will affect an operato
ページ13に含まれる内容の要旨
SAFETY WARNING! Extreme care should be taken when operating near loose objects such as gravel, rocks, wire, and other debris. Inspect the area before mowing. Foreign objects should be removed from the site to prevent machine damage and/or bodily injury or even death. Any objects that cannot be removed must be clearly marked and carefully avoided by the operator. Stop mowing immediately if blades strike a foreign object. Repair all damage and make certain rotor or blade carrier is balanced
ページ14に含まれる内容の要旨
SAFETY WARNING! Never Leave the mower unattended while the head is in the raised position. The mower could fall causing serious injury to anyone who might inadvertently be under the mower. (SBM-4) The rotating parts of this machine continue to rotate even after the Tractor has been turned off. The WARNING! operator should remain in his seat for 60 seconds after the brake has been set, the PTO disengaged, the tractor turned off, and all evidence of rotation has ceased. (SBM-5)
ページ15に含まれる内容の要旨
SAFETY WORK AREA PREPARATION It is the intention of this manual to inform owners and their operators of some of the dangers inherent in the use of this epuipment. The machine is an effective, durable and simple tool and when used correctly will provide satisfactory results with minimal danger. These warnings are intended to help ensure that operators and maintenance personnel treat the machine with the respect and care that a powered, edged tool demands and enjoy trouble-free and safe usage. Do
ページ16に含まれる内容の要旨
SAFETY 3. An area to be cut must first be inspected for objects that could be thrown or that could damage the machine. Walk through the area looking for overgrown fences, boulders and rocks, culverts, stumps or metal objects. Mark the inspected area with flags. If the area is dense and cannot be walked thoroughly it may be necessary to inspect a smaller area as well as possible, then trim away the part that has been inspected and can safely be removed. Walk each new area again and repeat the ins
ページ17に含まれる内容の要旨
SAFETY Reversing the direction of rotation of the cutting head on side opening machines increases the chances of objects being thrown out because of the position of the "gate" in relation to the boom arm. When clearing brush and small trees, start at the top and then lower the head down through the brush while sweeping from right to left. This avoids clogging the head with mulched material. NOTE: Keep the cutting head titled away from the operator when it is raised to avoid throwing splinters to
ページ18に含まれる内容の要旨
SAFETY ATTENTION! This unit was shipped with an Operator’s Manual Specifically designed to remain with the unit at all times. This manual is to be stored in the protective canister shipped with this unit. Because it is not feasible to attach the protective canister to the unit directly due to severe conditions in which it operates, the canister must be installed in a secure area such as the operator’s station. Choose a location that allows convenient access by the operator and easily allows r
ページ19に含まれる内容の要旨
SAFETY 2 1 3 Clean Surface With Alcohol Cover Holes Before Applying With Tape to Tape. Prevent Moisture From Entering Canister. 6 7 4 8 5 ITEM PART NO. QTY DESCRIPTION 1 02977385 1 Sq. Canister 2 02968143 2 1/2' Tape 3M Back to Back 3 02977417 1 Decal, Op. Man. Inside 4 10058000 4 Bolt 5 00024100 4 Flatwasher 6 02967444C 4 Oper. Man. (Inside) 7 00017000 4 Lockwasher 8 02959924 4 Nut Toplock Safety Section 1-13 GRIZZLY 52 01/05 © 2005 Alamo Group Inc.
ページ20に含まれる内容の要旨
SAFETY DECAL LOCATION ITEM PART NO. QTY LEVEL DESCRIPTION 1 00769736 1 WARNING Use/Repair Shield & Guards 2 00769737 2 DANGER Cutting Blades/Thrown Objects 3 02925100 1 IMPORTANT Genuine Parts 4 02967827 1 DANGER Multi-Hazard 5 02967867 2 DANGER Safety Gate Operation 6 02972284 2 LOGO Grizzly 7 02965262 1 WARNING Hose Burst 8 02973050 3 DANGER Danger Stand Clear 9 02973051 1 INSTRUCT Read Operators Instructions 10 02973052 1 DANGER Keep Clear Over Head Wires 11 00725746 1 PELIGRO Peligro Spanish
