Graco 4113の取扱説明書

ページ1に含まれる内容の要旨

Failure to follow these warnings and the assembly
™
instructions could result in serious injury or death. PARTS LIST
The Entertainer
CHECK that you have all the parts listed
Activity Center
below BEFORE assembling your
by
Entertainer™ activity center. If any parts
are missing, call Customer Service at
OWNER’S
1-800-345-4109.
MANUAL
Tool required: Screwdriver
Model No. __________
Serial No. __________
Dear Customer,
Please fill in the
model and serial
numbers above
from the label
Teether Beads

ページ2に含まれる内容の要旨

Step 6. To Assemble Your Step 9. ™ Insert Entertainer Activity Center Turn tray over. Push one leg into socket in tray exactly as Retaining Assemble the toys on the tray as shown. shown until it snaps into place. Repeat for other two legs. this loops Step 1. end NOTE: Toys may be removed from tray for cleaning or storage. first Turn the tray over and locate the hole that the seat lock screws into. Place the seat lock on the tray as shown and screw it to the Button tray. DO NOT overtighten face

ページ3に含まれる内容の要旨

Step 2. Replacement Parts After adjusting height of the seat, CHECK that your Instructions for ordering activity center parts: child’s feet can rest completely on the floor of your Complete form below. Your model number MUST be activity center . Tray should not be too high or too low. included on the form to ensure proper replacement parts. Remove child and readjust height if necessary. Your model number can be found on a sticker on the bottom of the tray. Payment must accompany your order. Par