ページ1に含まれる内容の要旨
INSTRUCTION MANUAL
300W
Mini Electric Stapler/Nailer
• Melbourne • Perth • Auckland • Hong Kong • Shanghai
MSN
• Taipei • New York • Verona • London • Paris 030820 PR ED3
ページ2に含まれる内容の要旨
Contents Warranty 2 Full 2 Years Home Use Warranty Whilst every effort is made to ensure your complete Introduction 3 satisfaction with this tool, occasionally, due to the mass Description of symbols 3 manufacturing techniques, a tool may not live up to our Specifications 3 required level of performance and you may need the assistance of our service department. General safety instructions 3 This product is warranted for a 2-year period for home Additional safety rules for staplers/nailers 5
ページ3に含まれる内容の要旨
Specifications Dear Customer Voltage: 240V ~ 50Hz If you require any help with your product, whether it is a Warranty claim, spare part or user information, Wattage: 300W please phone our Help Line for an immediate response. Staple Size: 18 Gauge, 10.6mm Phone 1300 880 001 in Australia or 0800 445 721 in Medium Crown New Zealand. (equiv. to
ページ4に含まれる内容の要旨
Damage to the lungs if an effective breathing 8. Use safety accessories. Safety glasses and earmuffs mask is not worn. should always be worn. A face or dust mask is also required if the sanding operation creates dust. Damage to hearing if effective earmuffs are not 9. Do not abuse the power cord. Never pull the cord to worn. disconnect the tool from the power point. Keep the cord away from heat, oil and sharp edges. Damage to the eyes if effective safety goggles or 10. Secure the work piec
ページ5に含まれる内容の要旨
moving parts, breakage of parts, proper mounting not in use, before cleaning and when reloading staples and any other conditions that may affect the or brad nails. operation of the tool. A part that is damaged should NEVER Fire a stapler/nailer unless it is on the material be properly repaired or replaced by an authorised you want to secure. service facility, unless otherwise indicated in this DANGER. Firing staples or nails into the air is extremely Instruction Manual. Defective switches
ページ6に含まれる内容の要旨
Know your product 1. Safety Lock 2. Trigger Switch 3. Power Cord 4. On/Off Power Switch 5. Catch 6. Tacking Mouth 2 3 1 4 5 6 6
ページ7に含まれる内容の要旨
3. Unlock the safety lock. Operation 4. Hold tool firmly with the Loading the stapler/nailer tacking mouth flat to the 1. Squeeze and pull the release working place forming a 90 button to unlock the stapler/ degree angle. [Fig 5] nailer. [Fig 1] 5. Squeeze the trigger to fire 2. Use only staples or brad nails the tool. recommended. NOTE: For better performance, [Fig 5] 3. Hold the tool upside down, please hold the tool with one squeeze the latch and slide hand on the “Housing Cap” whil
ページ8に含まれる内容の要旨
Carefully read the entire Instruction Manual before using this product. With continuing product development changes may Before returning this product for a have occurred which render the product received Warranty Claim or any other reason slightly different to that shown in this instruction Please Call 1300 880 001 (Australia) manual. The manufacturer reserves the right to or 0800 445 721 (New Zealand) change specifications without notice. Note: Specifications may differ from country to
