ページ1に含まれる内容の要旨
1. Solder tip
2. Solder tip release screw
3. Shaft
4. Flange
5. Rubber grip
6. Cord protector
30W
SOLDERING
5 6
IRON
3
DEC001SI
1 2 4
Full 2 years home use warranty Description of symbols Personal safety
Whilst every effort is made to ensure your complete The rating plate on your tool may show symbols. These
• Stay alert, watch what you are doing and use
satisfaction with this tool, occasionally, due to the mass represent important information about the product or
common sense when operatin
ページ2に含まれる内容の要旨
Service Setting up the iron stand • Have your power tool serviced by a qualified 1. By firmly holding the stand with both hands, press the Full 2-Year Warranty repair personnel using only identical replacement centre of the stand in so that it separates itself from This product is warranted for a 2-year period for parts. This will ensure that the safety of the power the rest of the stand and bend to approximately 45° home domestic use from the date of the original tool
ページ3に含まれる内容の要旨
2 3.6V CORDLESS SCRE WDRIVER DEC002SD 1. Chuck 2. Forward/Reverse switch 3. Handle adjusting switch 4. Charging socket 4 5. Charging indicator 1 3 5 Wear hearing protection. • Use safety equipment. Always wear eye protection. Full 2 years home use warranty Wear eye protection. Safety equipment such as a dust mask, non-skid safety Whilst every effort is made to ensure your complete Wear breathing protection. shoes, hard hat, or hearing protection used for appropriate satisfaction with this
ページ4に含まれる内容の要旨
• Do not put pressure on the drill, such that it slows the motor • Do not store or use the tool and battery pack in locations WARNING. Do not leave your screwdriver on charge down. Allow the drill bit to cut without pressure. You will get where the temperature may reach or exceed 104°F (40°C) continuously. This will damage the battery. better results and you will be taking better care of your tool. such as alongside sheds or metal structures in the summer. NOTE. Avoid charging your scr
ページ5に含まれる内容の要旨
9 5 8 4 2 1. Cord protector 2. Wire loop 135W 3. On/off switch 4. Variable speed dial 5. Spindle lock button AC ROTARY 6. Collet nut 7. Collet 8. Brush caps 9. Collet cover TOOL 7 6 8 3 1 DEC003AC • Avoid accidental starting. Ensure the switch is in the Full 2 years home use warranty Specifications off-position before plugging in. Carrying power tools with Whilst every effort is made to ensure your complete Input power: 135W your finger on the switch or plugging in power tools that satisfact
ページ6に含まれる内容の要旨
Children should be supervised at all times if they are in the 6. Make sure that the bit is inserted as far as possible. Cutting area in which the tool is being used. It is also imperative Having too much shaft exposed could cause it to damage Various cutting wheels let you cut, trim and shape metal, that you observe the accident prevention regulations in or bend. glass and ceramics. force in your area. The same applies for general rules of occupational health and safety. Locating a cutting/
ページ7に含まれる内容の要旨
3 1 2 13W ELECTRIC ENGRAVER DEC007EN 4 1. On/off switch 2. Engraving tip 3. Stroke adjustment dial 4. Tip release screw 5 5. Power cord Full 2 years home use warranty Environmental protection Electrical safety Whilst every effort is made to ensure your complete Recycle unwanted materials instead of • If cordset is damaged, have it replaced by an satisfaction with this tool, occasionally, due to the mass disposing of them as waste. All tools, hoses authorised service centre. manufacturing t
ページ8に含まれる内容の要旨
Power tool use and care Unpacking • Do not force the power tool. Use the correct power Due to modern mass production techniques, it is unlikely Full 2-Year Warranty tool for your application. The correct power tool will that your GMC Power Tool is faulty or that a part is This product is warranted for a 2-year period for do the job better and safer at the rate for which it missing. If you find anything wrong, do not operate the home domestic use from the date of the orig
