ページ1に含まれる内容の要旨
INSTRUCTION MANUAL
1400W
13mm Hammer Drill
• Melbourne • Perth • Auckland • Hong Kong • Shanghai
HD1400K
• Taipei • New York • Verona • London • Paris
040413 HD1400K ED5
ページ2に含まれる内容の要旨
Contents Warranty 2 Full 2 Years Home Use Warranty Whilst every effort is made to ensure your complete Introduction 3 satisfaction with this tool, occasionally, due to the mass Environmental protection 3 manufacturing techniques, a tool may not live up to our required level of performance and you may need the Description of symbols 3 assistance of our service department. Specifications 3 This product is warranted for a 2-year period for home Safety instructions 4 domestic use from the date
ページ3に含まれる内容の要旨
Description of symbols Dear Customer The rating plate on your tool may show symbols. These If you require any help with your product, whether it represent important information about the product or is a Warranty claim, spare part or user information, instructions on its use. please phone our Help Line for an immediate response. Wear hearing protection. Phone 1300 880 001 in Australia or 0800 445 721 in New Zealand. Wear eye protection. Wear breathing protection. Introduction Double insul
ページ4に含まれる内容の要旨
Personal safety Safety instructions WARNING. Read and understand all instructions. Failure to • Stay alert, watch what you are doing and use common follow all instructions listed below may result in electric sense when operating a power tool. Do not use a power shock, fire and/or serious injury. The term “power tool” in tool while you are tired or under the influence of drugs, all of the warnings below refers to your mains-operated alcohol, or medication. A moment of inattention (corded) p
ページ5に含まれる内容の要旨
• Disconnect the plug from the power source before Service making any adjustments, changing accessories, or • Have your power tool serviced by a qualified repair storing power tools. Such preventive safety measures personnel using only identical replacement parts. This reduce the risk of starting the power tool accidentally. will ensure that the safety of the power tool • Store idle power tools out of the reach of children and is maintained. do not allow persons unfamiliar with the p
ページ6に含まれる内容の要旨
If in doubt, do not plug in the tool. Using a power source Additional safety rules for drills with a voltage less than the nameplate rating is harmful • Wear ear protectors with impact drills. to the motor. Exposure to noise can cause hearing loss. The tool must be used only for its prescribed purpose. • Use auxiliary handles supplied with the tool. Any use other than those mentioned in this Manual will Loss of control can cause personal injury. be considered a case of misuse. The user and
ページ7に含まれる内容の要旨
Know your product 1. 13mm Single sleeve keyless metal chuck 2. Over-moulded auxiliary handle 3. Depth gauge 4. Drilling/hammer mode selector 5. Lock-on button 6. Forward/Reverse switch 7. Variable speed trigger switch 9 4 8. Speed dial 9. Spindle lock button 10. Metal gear box cover 3 1 6 5 10 8 7 2 7
ページ8に含まれる内容の要旨
Unpacking Installing and removing bits Due to modern mass production techniques, it is unlikely CAUTION. Always ensure that the drill is switched off and that your GMC Power Tool is faulty or that a part is plug is removed from the power point before making any missing. If you find anything wrong, do not operate the adjustments. tool until the parts have been replaced or the fault has 1. T he drill features a keyless chuck (1) and spindle lock been rectified. Failure to do so could result in
ページ9に含まれる内容の要旨
Operation Reversing the direction of rotation 1. The forward/reverse switch (6) Starting and stopping protrudes from one side of the Operational controls drill to the other. 1. E nsure that the tool is in 2. The arrow head symbol on each good condition. side of the switch indicates the 2. P lug the cordset into the direction of drilling when the mains socket. switch is pushed from that side. 3. Depress the trigger switch (7) The forward direction is selected when the arrow head symbo
ページ10に含まれる内容の要旨
Chuck replacement Hints for use Chuck removal Note. When drilling into masonry the drilling rate is fast and burnout of the tip will occur if the drill bit is not Always wear eye protection. constantly cleared. Tighten the chuck around the shorter end of a hex key • Use only correctly sharpened drill bits, which are (not supplied) of 5mm or greater size. Using a wooden suitable for the material being drilled. mallet or similar object, strike the longer end in the clockwise direction. Thi
ページ11に含まれる内容の要旨
Wood Drilling Masonry drilling • For maximum performance, use high speed steel bits for • For maximum performance use tungsten carbide-tipped wood drilling. masonry impact bits when drilling holes in brick, tile, concrete, etc. • Move drilling/hammer mode selector to drilling mode . • Move drilling/hammer mode selector to hammer mode . • Secure the workpiece to prevent it from turning when drilling. • Apply light pressure and medium speed for best results in brick. • Begin drilling at a v
ページ12に含まれる内容の要旨
Carefully read the entire Instruction Manual before using this product. With continuing product development changes may Before returning this product for a have occurred which render the product received Warranty Claim or any other reason slightly different to that shown in this instruction Please Call 1300 880 001 (Australia) manual. The manufacturer reserves the right to or 0800 445 721 (New Zealand) change specifications without notice. Note: Specifications may differ from country to
